Summary:
Fixing https://gristlabs.getgrist.com/doc/check-ins/p/12#a1.s19.r1045.c19 :
> Problem: user creates fresh new empty column. Users with access to write to that column, but not modify schema, will not in fact be able to write into it (since on first data entry column type needs to change). Experience is confusing.
Refactored `enter_indirection` and `leave_indirection` to a single context manager method for use with `with` instead of `try/finally`.
Used the new method in `_ensure_column_accepts_data` around column changing actions converting empty column to data column.
Test Plan:
Updated a Python test, reflecting that the correct actions are now marked as direct=False.
Tested manually that I can now add data to a blank column without schema access, while I wasn't able to before, and I still can't make other schema changes.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3446
Summary:
Importing a file with many columns would be very slow due to expensive calls to rebuild_usercode for each added column: https://grist.slack.com/archives/C02EGJ1FUCV/p1652395747972749?thread_ts=1652388644.394419&cid=C02EGJ1FUCV
This diff suppresses rebuild_usercode temporarily while adding columns in a loop in MakeImportTransformColumns, then calls it once afterwards.
Test Plan: Manually imported a wide file repeatedly. Eventually, whehn importing a file with 300 columns, generating the preview went from taking about 100 seconds to 20 seconds.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3445
Summary: To help with mistakes in formulas, forbid assigning to attributes of `rec` (e.g. `$foo = 1` which should probably be `==`) and ensure that there is at least one `return` in the formula (after maybe adding an implicit one at the end).
Test Plan: Extended Python unit test, updated tests which were missing return.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3439
Summary:
This allows limiting the memory available to documents in the sandbox when gvisor is used. If memory limit is exceeded, we offer to open doc in recovery mode. Recovery mode is tweaked to open docs with tables in "ondemand" mode, which will generally take less memory and allow for deleting rows.
The limit is on the size of the virtual address space available to the sandbox (`RLIMIT_AS`), which in practice appears to function as one would want, and is the only practical option. There is a documented `RLIMIT_RSS` limit to `specifies the limit (in bytes) of the process's resident set (the number of virtual pages resident in RAM)` but this is no longer enforced by the kernel (neither the host nor gvisor).
When the sandbox runs out of memory, there are many ways it can fail. This diff catches all the ones I saw, but there could be more.
Test Plan: added tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3398
Summary:
openpyxl was producing tuples while some older code expects lists. Choosing to convert the tuples to lists (instead of making the other code work with tuples) in case there's other similar issues still out there. Should fix the error mentioned in https://grist.slack.com/archives/C0234CPPXPA/p1652797247167719:
```
Traceback (most recent call last):
File "/gristroot/grist/sandbox/grist/sandbox.py", line 103, in run
ret = self._functions[fname](*args)
File "/gristroot/grist/sandbox/grist/imports/register.py", line 11, in parse_excel
return import_file(file_source)
File "/gristroot/grist/sandbox/grist/imports/import_xls.py", line 20, in import_file
parse_options, tables = parse_file(path)
File "/gristroot/grist/sandbox/grist/imports/import_xls.py", line 26, in parse_file
return parse_open_file(f)
File "/gristroot/grist/sandbox/grist/imports/import_xls.py", line 69, in parse_open_file
table_data_with_types = parse_data.get_table_data(rows, len(headers))
File "/gristroot/grist/sandbox/grist/parse_data.py", line 215, in get_table_data
row.extend([""] * missing_values)
AttributeError: 'tuple' object has no attribute 'extend'
```
Test Plan: Existing tests. Haven't figured out how to reproduce the original error.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3434
Summary:
Currently, we have two ways that we deliver Grist. One is grist-core,
which has simple defaults and is relatively easy for third parties to
deploy. The second is our internal build for our SaaS, which is the
opposite. For self-managed Grist, a planned paid on-premise version
of Grist, I adopt the following approach:
* Use the `grist-core` build mechanism, extending it to accept an
overlay of extra code if present.
* Extra code is supplied in a self-contained `ext` directory, with
an `ext/app` directory that is of same structure as core `app`
and `stubs/app`.
* The `ext` directory also contains information about extra
node dependencies needed beyond that of `grist-core`.
* The `ext` directory is contained within our monorepo rather than
`grist-core` since it may contain material not under the Apache
license.
Docker builds are achieved in our monorepo by using the `--build-context`
functionality to add in `ext` during the regular `grist-core` build:
```
docker buildx build --load -t gristlabs/grist-ee --build-context=ext=../ext .
```
Incremental builds in our monorepo are achieved with the `build_core.sh` helper,
like:
```
buildtools/build_core.sh /tmp/self-managed
cd /tmp/self-managed
yarn start
```
The initial `ext` directory contains material for snapshotting to S3.
If you build the docker image as above, and have S3 access, you can
do something like:
```
docker run -p 8484:8484 --env GRIST_SESSION_SECRET=a-secret \
--env GRIST_DOCS_S3_BUCKET=grist-docs-test \
--env GRIST_DOCS_S3_PREFIX=self-managed \
-v $HOME/.aws:/root/.aws -it gristlabs/grist-ee
```
This will start a version of Grist that is like `grist-core` but with
S3 snapshots enabled. To release this code to `grist-core`, it would
just need to move from `ext/app` to `app` within core.
I tried a lot of ways of organizing self-managed Grist, and this was
what made me happiest. There are a lot of trade-offs, but here is what
I was looking for:
* Only OSS-code in grist-core. Adding mixed-license material there
feels unfair to people already working with the repo. That said,
a possible future is to move away from our private monorepo to
a public mixed-licence repo, which could have the same relationship
with grist-core as the monorepo has.
* Minimal differences between self-managed builds and one of our
existing builds, ideally hewing as close to grist-core as possible
for ease of documentation, debugging, and maintenance.
* Ideally, docker builds without copying files around (the new
`--build-context` functionality made that possible).
* Compatibility with monorepo build.
Expressing dependencies of the extra code in `ext` proved tricky to
do in a clean way. Yarn/npm fought me every step of the way - everything
related to optional dependencies was unsatisfactory in some respect.
Yarn2 is flexible but smells like it might be overreach. In the end,
organizing to install non-core dependencies one directory up from the
main build was a good simple trick that saved my bacon.
This diff gets us to the point of building `grist-ee` images conveniently,
but there isn't a public repo people can go look at to see its source. This
could be generated by taking `grist-core`, adding the `ext` directory
to it, and pushing to a distinct repository. I'm not in a hurry to do that,
since a PR to that repo would be hard to sync with our monorepo and
`grist-core`. Also, we don't have any licensing text ready for the `ext`
directory. So leaving that for future work.
Test Plan: manual
Reviewers: georgegevoian, alexmojaki
Reviewed By: georgegevoian, alexmojaki
Differential Revision: https://phab.getgrist.com/D3415
Summary:
Use openpyxl instead of messytables (which used xlrd internally) in import_xls.py.
Skip empty rows since excel files can easily contain huge numbers of them.
Drop support for xls files (which openpyxl doesn't support) in favour of the newer xlsx format.
Fix some details relating to python virtualenvs and dependencies, as Jenkins was failing to find new Python dependencies.
Test Plan: Mostly relying on existing tests. Updated various tests which referred to xls files instead of xlsx. Added a Python test for skipping empty rows.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3406
Summary:
- Better focus on the widget title
- Adding columns only to the current view section
- New popup with options when user wants to delete a page
- New dialog to enter table name
- New table as a widget doesn't create a separate page
- Removing a table doesn't remove the primary view
Test Plan: Updated and new tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3410
Summary: Adds a special user action `UpdateCurrentTime` which invalidates an internal engine dependency node that doesn't belong to any table but is 'used' by the `NOW()` function. Applies the action automatically every hour.
Test Plan: Added a Python test for the user action. Tested the interval periodically applying the action manually: {F43312}
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3389
Summary:
A new way for renaming tables.
- There is a new popup to rename section (where you can also rename the table)
- Renaming/Deleting page doesn't modify/delete the table.
- Renaming table can rename a page if the names match (and the page contains a section with that table).
- User can rename table in Raw Data UI in two ways - either on the listing or by using the section name popup
- As before, there is no way to change tableId - it is derived from a table name.
- When the section name is empty the table name is shown instead.
- White space for section name is allowed (to discuss) - so the user can just paste ' '.
- Empty name for a page is not allowed (but white space is).
- Some bugs related to deleting tables with attached summary tables (and with undoing this operation) were fixed (but not all of them yet).
Test Plan: Updated tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D3360
Summary:
Summary columns now have their own conditional rules,
which are not shared with sister columns.
Test Plan: New test
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3388
Summary:
Updating one summary groupby columns is handle by the
`update_summary_section`. That routine is in charge of creating a new
summary table and transfer all possible columns from old table to the
new one, so that the new table appear to change only the minimum to
users.
The problem that this diff address is that, the logic to decide what columns we need to keep, only applies to the visible
fields and ignore the hidden columns, causing all hidden columns to be removed. This diff, simply
changes that routine to address all columns.
the mutliple fixes on the test_summary2.py result from a change of
ordering of columns: the culprit is the `group` columns, which is by
default a hidden columns and that had to be explicitely added back to
the new summary table. It is now transferred automatically, like other
columns, which does cause a little change of ordering on the db. This
should not result in any display order changes for the users.
Recent related diff: https://phab.getgrist.com/D3351
Test Plan: Includes new test case; both python and nbrowser
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3393
Summary:
- Previously showed "UnboundLocalError". Now will show:
Import failed: Failed to parse Excel file.
Error: No tables found (1 empty tables skipped)
- Also fix logging for import code
Test Plan: Added a test case
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3396
Summary: InitNewDoc is essentially only used to generate initialDocSql, so it doesn't make sense to set the timezone and locale. They are always set when actually creating a new doc anyway. Discussed in https://grist.slack.com/archives/C0234CPPXPA/p1650312714217089.
Test Plan: this
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3394
Summary:
Call ActiveDoc.removeUnusedAttachments every hour using setInterval, and in ActiveDoc.shutdown (which also clears said interval).
Unrelated: small fix to my webhooks code which was creating a redis client on shutdown just to quit it.
Test Plan:
Tweaked DocApi test to remove expired attachments by force-reloading the doc, so that it removes them during shutdown. Extracted a new testing endpoint /verifyFiles to support this test (previously running that code only happened with `/removeUnused?verifyfiles=1`).
Tested the setInterval part manually.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3387
Summary:
Redesigning color picker:
- Single color palette (no light/dark switch)
- Ability to remove color (new empty button)
New font options in the color picker.
Font options are available on:
- Default cell style
- Conditional rules styles
- Choice/ChoiceList editor and token field
- Filters for Choice/ChoiceList columns
Design document:
https://www.figma.com/file/bRTsb47VIOVBfJPj0qF3C9/Grist-Updates?node-id=415%3A8135
Test Plan: new and updated tests
Reviewers: georgegevoian, alexmojaki
Reviewed By: georgegevoian, alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3335
Summary:
Description of the problem can be found here: https://grist.slack.com/archives/C069RUP71/p1634899282005600
- users removing a group by column that is of type numeric was
resulting in the column missing from the summary table. Where
instead is should be present as a 'SUM($group.${col.colId})'
formula column
- this diff fixes that issue and adds unit test
Test Plan: Should not break anything. Adds not test case.
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3351
Summary: Adds a migration in preparation for future work on tracking and deleting attachments. This includes a `_grist_Attachments.timeDeleted` column which isn't used yet, and changing the storage format of user columns of type `Attachments`. DocStorage now treats Attachments like RefList in general (since they use JSON), which also prompted a tiny bit of refactoring.
Test Plan: Added a migration test case showing the change in format.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3352
Summary: While `$ref.other_ref` returns a reference (Record) allowing chaining more properties like `$ref.other_ref.foo`, reflists (RecordSet) did not allow this, e.g. `$reflist.other_ref` returned a plain list of records, preventing chaining more dot notation. Discussed here: https://grist.slack.com/archives/CDHABLZJT/p1648845745765839
Test Plan: Added a Python unit test. Formulas like `$reflist.other_ref` were already very common though, and getting the functionality code slightly wrong leads to a flood of test failures.
Reviewers: jarek
Reviewed By: jarek
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3354
Summary:
Adds a `data-grist-col-ref` attribute to the copied HTML, then uses that when pasting to look up the source column and retrieve info about it. Copies the info into the target column if:
- The document is the same (the docId hash matches)
- The source column still exists and has the same type as when copied
- The source type isn't Text, because in that case it's nice if type guessing still happens
- The target column is empty, meaning it has type Any (we check earlier that it's not a formula column)
The info copied is the type, widgetOptions, and reference column settings (visible and display columns) but not conditional formatting.
The changes are mostly in a function `parsePasteForView` which is based on `BaseView._parsePasteForView` but ported to TypeScript in a new file `BaseView2.ts`.
Added a useraction `MaybeCopyDisplayFormula` exposing an existing Python function `maybe_copy_display_formula` because the target column needs a slightly different display formula.
Test Plan: Added a new nbrowser test file and fixture doc.
Reviewers: cyprien
Reviewed By: cyprien
Subscribers: jarek, dsagal
Differential Revision: https://phab.getgrist.com/D3344
Summary:
JSON import logic was creating columns of type Int when JSON contained integral
values. This causes errors with large errors (e.g. millisecond timestamps), and
Numeric is generally the more convenient and common default.
Test Plan: TBD
Reviewers: jarek, alexmojaki
Reviewed By: jarek, alexmojaki
Subscribers: jarek, alexmojaki
Differential Revision: https://phab.getgrist.com/D3339
Summary:
Adds a small missing script now used in core docker
container to create a python3 gvisor checkpoint on startup.
Test Plan: manual
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D3340
Summary: This changes Table.sample_record from a regular attribute to a property that's only computed when it's needed, which is only for autocompletion. This means it's not cached any more, but it's also not recomputed every time the schema changes. Profiling showed that _make_sample_record took a signification portion of time, and this change makes the tests 2 or 3 seconds faster.
Test Plan: existing tests
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3334
Summary:
This adds support for gvisor sandboxing in core. When Grist is run outside of a container, regular gvisor can be used (if on linux), and will run in rootless mode. When Grist is run inside a container, docker's default policy is insufficient for running gvisor, so a fork of gvisor is used that has less defence-in-depth but can run without privileges.
Sandboxing is automatically turned on in the Grist core container. It is not turned on automatically when built from source, since it is operating-system dependent.
This diff may break a complex method of testing Grist with gvisor on macs that I may have been the only person using. If anyone complains I'll find time on a mac to fix it :)
This diff includes a small "easter egg" to force document loads, primarily intended for developer use.
Test Plan: existing tests pass; checked that core and saas docker builds function
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3333
Summary:
Adding conditional formatting rules feature.
Each column can have multiple styling rules which are applied in order
when evaluated to a truthy value.
- The creator panel has a new section: Cell Style
- New user action AddEmptyRule for adding an empty rule
- New columns in _grist_Table_columns and fields
A new color picker will be introduced in a follow-up diff (as it is also
used in choice/choice list/filters).
Design document:
https://grist.quip.com/FVzfAgoO5xOF/Conditional-Formatting-Implementation-Design
Test Plan: new tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3282
Summary:
This is a fix for a bug discussed in https://grist.slack.com/archives/C069RUP71/p1645138610722889
I still haven't completely wrapped my head around it or figured out how to make a simple reproducible example, but the problem seems to be that a lookup can happen before the column(s) being looked up (the summary helper column in this case) have been computed fully (I think it got interrupted halfway by an OrderError). `do_lookup` would check via `engine._use_node` that the row IDs it found had all been computed already, but there might still be other rows that hadn't been computed yet and would also have values matching the lookup key, so it missed those.
This diff instead calls `_use_node` with no `row_ids` argument, which should ensure that all rows have already been computed.
At first I was worried about how this would affect performance, which led me down an optimisation rabbit hole, hence a bit of unrelated cleanup here and also https://phab.getgrist.com/D3310 . But it doesn't seem to be a problem, and IIUC it should actually make things better, although this code is pretty confusing.
Test Plan: Tested manually that the doc no longer behaves weirdly
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal, paulfitz
Differential Revision: https://phab.getgrist.com/D3308
Summary:
This is an attempt to optimise Engine._use_node. It doesn't seem to actually improve overall performance significantly, but it shouldn't make it worse, and I think it's an improvement to the code.
It turns out that there's no need to track a stack of compute frames any more. The only time we get close to nested evaluation, we set allow_evaluation=False to prevent it actually happening. So there's only one 'frame' during actual evaluation, which means we can get rid of the concept of frames entirely. This allows simplifying the code and letting the computer do less work in general.
Test Plan: this
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3310
Summary: I ran the python tests through a profiler and found that just generating the autocomplete context was a major cost, and this would happen with every schema change. By only generating it when needed for autocomplete, the time for tests reduced from ~38s to ~33s.
Test Plan: this
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3312
Summary:
- Removed string parsing and some type guessing code from parse_data.py. That logic is now implicitly done by ValueGuesser by leaving the initial column type as Any. parse_data.py mostly comes into play when importing files (e.g. Excel) containing values that already have types, i.e. numbers and dates.
- 0s and 1s are treated as numbers instead of booleans to keep imports lossless.
- Removed dateguess.py and test_dateguess.py.
- Changed what `guessDateFormat` does when multiple date formats work equally well for the given data, in order to be consistent with the old dateguess.py.
- Columns containing numbers are now always imported as Numeric, never Int.
- Removed `NullIfEmptyParser` because it was interfering with the new system. Its purpose was to avoid pointlessly changing a column from Any to Text when no actual data was inserted. A different solution to that problem was already added to `_ensure_column_accepts_data` in the data engine in a recent related diff.
Test Plan:
- Added 2 `nbrowser/Importer2` tests.
- Updated various existing tests.
- Extended testing of `guessDateFormat`. Added `guessDateFormats` to show how ambiguous dates are handled internally.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3302
Summary:
Adds `common/ValueGuesser.ts` with logic for guessing column type and widget options (only for dates/datetimes) from an array of strings, and converting the strings to the guessed type in a lossless manner, so that converting back to Text gives the original values.
Changes `_ensure_column_accepts_data` in Python to call an exported JS method using the new logic where possible.
Test Plan: Added `test/common/ValueGuesser.ts` to unit test the core guessing logic and a DocApi end-to-end test for what happens to new columns.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3290
Summary:
This makes a `user.SessionID` value available in information about the user, for use with trigger formulas and granular access rules. The ID should be constant within a browser session for anonymous user. For logged in users it simply reflects their user id.
This ID makes it possible to write access rules and trigger formulas that allow different anonymous users to create, view, and edit their own records in a document.
For example, you could have a brain-storming document for puns, and allow anyone to add to it (without logging in), letting people edit their own records, but not showing the records to others until they are approved by a moderator. Without something like this, we could only let anonymous people add one field of a record, and not have a secure way to let them edit that field or others in the same record.
Also adds a `user.IsLoggedIn` flag in passing.
Test Plan: Added a test, updated tests. The test added is a mini-moderation doc, don't use it for real because it allows users to edit their entries after a moderator has approved them.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3273
Summary:
Adds a method Table._num_rows using an empty lookup map column.
Adds a method Engine.count_rows which adds them all up.
Returns the count after applying user actions to be logged by ActiveDoc.
Test Plan: Added a unit test in Python. Tested log message manually.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3275
Summary:
Prevent most updates or removals of raw view sections and their fields in `useractions.py`. Only a fiew columns are allowed to be updated.
Removed the unused method `_UpdateViews` while I was at it.
Test Plan:
Added a Python test.
Tested manually that I can still make all expected changes, i.e. those allowed by the UI, e.g. reordering columns.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3263
Summary:
When possible, the original column headers from imported
files will now be used as the labels for Grist columns. This includes
values that were previously invalid Grist column identifiers, such
as those containing Unicode.
Test Plan: Updated server and browser tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3261
Summary:
As designed in https://grist.quip.com/fZSrAnJKgO5j/Add-or-Update-Records-API
Current `POST /records` adds records, and `PATCH /records` updates them by row ID. This adds `PUT /records` to 'upsert' records, applying the AddOrUpdate user action. PUT was chosen because it's idempotent. Using a separate method (instead of inferring based on the request body) also cleanly separates validation, documentation, etc.
The name `require` for the new property was suggested by Paul because `where` isn't very clear when adding records.
Test Plan: New DocApi tests
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3251
Summary: This is https://phab.getgrist.com/D3205 plus some changes (https://github.com/dsagal/grist/compare/type-convert...type-convert-server?expand=1) that move the conversion process to the backend. A new user action ConvertFromColumn uses `call_external` so that the data engine can delegate back to ActiveDoc. Code for creating formatters and parsers is significantly refactored so that most of the logic is in `common` and can be used in different ways.
Test Plan: The original diff adds plenty of tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3240
Summary:
New user action as described in https://grist.quip.com/fZSrAnJKgO5j/Add-or-Update-Records-API, with options to allow most of the mentioned possible behaviours.
The Python code is due to Alex (as should be obvious from the u in behaviours).
Test Plan: Added a unit test.
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3239
Summary: This is the first step towards raw data views, merely adding metadata without any UI. Every 'normal' table now has a widget referenced by `rawViewSectionRef`. It has no parent view/page and cannot actually be viewed for now. The widget is created during the AddTable user action, and the migration creates a widget for existing tables.
Test Plan: Many tests had to be updated, especially tests that listed all view sections and/or fields.
Reviewers: jarek, dsagal
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3232
Summary:
Updating filters when user renames labels in a choice/choice list column.
When there are unsaved filters they are reverted to orginal values (only
for the affected column).
Test Plan: new tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3230
Summary:
Improving experience when editing group-by column:
- Disable column rename
- Allow changing most widget properties:
- Color/Background
- Number format
- Date/DateTime format (but not the timezone)
- All toggle options (for toggle column)
- Remove Edit button on Choice Edit
- Changing the underlying column should reset all those options back to the original column.
Test Plan: nbrowser
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3216
Summary:
- Improve readability of documentation of CONTAINS.
- Add leading underscore to Record._get_encodable_row_ids() to hide from
public docs, and avoid interfering with user fields.
- Fix up lint errors
Test Plan: No behavior changes
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3209
Summary:
Addresses several issues:
- Error 'Cannot modify summary group-by column' when changing Text ->
ChoiceList in the presence of summary tables.
- Error 'ModifyColumn in unexpected position' when changing ChoiceList -> Text
in the presence of summary tables.
- Double-evaluation of trigger formulas in some cases.
Fixes include:
- Fixed verification that summary group-by columns match the underlying ones,
and added comments to explain.
- Avoid updating non-metadata lookups after each doc-action (early lookups
generated extra actions to populate summary tables, causing the 'ModifyColumn
in unexpected position' bug)
- When updating formulas, do update lookups first.
- Made a client-side tweak to avoid a JS error in case of some undos.
Solution to reduce lookups is based on https://phab.getgrist.com/D3069?vs=on&id=12445,
and tests for double-evaluation of trigger formulas are taken from there.
Add a new test case to protect against bugs caused by incorrect order of
evaluating #lookup columns.
Enhanced ChoiceList browser test to check a conversion scenario in the presence
of summary tables, previously triggering bugs.
Test Plan: Various tests added or enhanced.
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3184
Summary:
Removed some TS and python code interacting with this meta table. Not touching schema or migrations.
This is not really necessary, just checking my understanding and cleaning up in preparation for raw data views. I can also remove _grist_TabItems code while I'm at it.
Test Plan: this
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3161
Summary:
Existing filters are now moved out of fields
and into a new metadata table for filters, and the
client is updated to retrieve/update/save filters from
the new table. This enables storing of filters for
columns that don't have fields (notably, hidden columns).
Test Plan: Browser and server tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3138
Summary:
The Importer dialog is now maximized, showing additional column
matching options and information on the left, with the preview
table shown on the right. Columns can be mapped via a select menu
listing all source columns, or by clicking a formula field next to
the menu and directly editing the transform formula.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3096
Summary: title
Test Plan: Added python unit test. Seems like the first test of sort_by in the whole codebase.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3124
Summary:
Added a new object type code `l` (for lookup) which can be used in user actions as a temporary cell value in ref[list] columns and is immediately converted to a row ID in the data engine. The value contains the original raw string (to be used as alt text), the column ID to lookup (typically the visible column) and one or more values to lookup.
For reflists, valueParser now tries parsing the string first as JSON, then as a CSV row, and applies the visible column parsed to each item.
Both ref and reflists columns no longer format the parsed value when there's no matching reference, the original unparsed string is used as alttext instead.
Test Plan: Added another table "Multi-References" to CopyPaste test. Made that table and the References table test with and without table data loaded in the browser.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3118
Test Plan: Added check for these values in a relevant test case.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3117
Summary:
Adding sort options for columns.
- Sort menu has a new option "More sort options" that opens up Sort left menu
- Each sort entry has an additional menu with 3 options
-- Order by choice index (for the Choice column, orders by choice position)
-- Empty last (puts empty values last in ascending order, first in descending order)
-- Natural sort (for Text column, compares strings with numbers as numbers)
Updated also CSV/Excel export and api sorting.
Most of the changes in this diff is a sort expression refactoring. Pulling out all the methods
that works on sortExpression array into a single namespace.
Test Plan: Browser tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: dsagal, alexmojaki
Differential Revision: https://phab.getgrist.com/D3077
Summary:
When a value $B.A is a ReferenceList, returning it in an Any column can cause
an "unmarshallable object" error, if the RecordSet happens to be storing
row_ids in the form of a nested RecordList object. This happened consistently
when $B.A started off as another type and got converted to ReferenceList.
A specific manifestation was when a reference column $B uses "A" as a display
column, and this column gets converted from Text to ReferenceList.
Test Plan: Added a test that reproduces the problem.
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3089
Summary: Upgrade chardet version from 2.3.0 to 4.0.0 to improve encoding detection when importing files with non-ascii characters.
Test Plan: the tests
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3080
Summary: return NOW(tz=tz).date()
Test Plan: None, curious to see if this fixes test_time_defaults when run near midnight.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3079
Summary:
Record numbers of rows, columns, cells, and bytes of marshalled data for most calls to table_data_from_db
Export new function get_table_stats in the sandbox, which gives the raw numbers and totals.
Get and log these stats in ActiveDoc right after loading tables, before Calculate, so they are logged even in case of errors.
Tweak logging about number of tables, especially number of on-demand tables, to not only show in debug logging.
Test Plan: Updated doc regression tests, that shows what the data looks like nicely.
Reviewers: dsagal, paulfitz
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3081
Summary:
This verifies that all existing tests are capable of running under python3/gvisor, and fixes the small issues that came up. It does not yet activate python3 tests on all diffs, only diffs that specifically request them.
* Adds a suffix in test names and output directories for tests run with PYTHON_VERSION=3, so that results of the same test run with and without the flag can be aggregated cleanly.
* Adds support for checkpointing to the gvisor sandbox adapter.
* Prepares a checkpoint made after grist python code has loaded in the gvisor sandbox.
* Changes how `DOC_URL` is passed to the sandbox, since it can no longer be passed in as an environment variable when using checkpoints.
* Uses the checkpoint to speed up tests using the gvisor sandbox, otherwise a lot of tests need more time (especially on mac under docker).
* Directs jenkins to run all tests with python2 and python3 when a new file `buildtools/changelogs/python.txt` is touched (this diff counts as touching that file).
* Tweaks miscellaneous tests
- some needed fixes exposed by slightly different timing
- a small number actually give different results in py3 (removal of `u` prefixes).
- some needed a little more time
The DOC_URL change is not the ultimate solution we want for DOC_URL. Eventually it should be a variable that gets updated, like the date perhaps. This is just a small pragmatic change to preserve existing behavior.
Tests are run mindlessly as py3, and for some tests it won't change anything (e.g. if they do not use NSandbox). Tests are not run in parallel, doubling overall test time.
Checkpoints could be useful in deployment, though this diff doesn't use them there.
The application of checkpoints doesn't check for other configuration like 3-versus-5-pipe that we don't actually use.
Python2 tests run using pynbox as always for now.
The diff got sufficiently bulky that I didn't tackle running py3 on "regular" diffs in it. My preference, given that most tests don't appear to stress the python side of things, would be to make a selection of the tests that do and a few wild cards, and run those tests on both pythons rather then all of them. For diffs making a significant python change, I'd propose touching buildtools/changelogs/python.txt for full tests. But this is a conversation in progress.
A total of 6886 tests ran on this diff.
Test Plan: this is a step in preparing tests for py3 transition
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3066
Summary: Makes type checking a bit stronger
Test Plan: it just has to compile
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3065
Summary:
Finishing imports now occurs in Node instead of the
data engine, which makes it possible to import into
on-demand tables. Merging code was also refactored
and now uses a SQL query to diff source and destination
tables in order to determine what to update or add.
Also fixes a bug where incremental imports involving
Excel files with multiple sheets would fail due to the UI
not serializing merge options correctly.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3046
Summary:
Make _rename_cell_choice return None for unchanged values
The tests actually passs without the implementation changes, because trim_update_action removed the noop updates. So I'm not sure if this is an improvement. It certainly seems that it would be slower in cases where every record is updated, and it's hard to say if it would be better in other cases.
Test Plan:
Checked doc actions in existing test.
Also tested for invalid existing values.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3052
Summary:
With this diff, when a user opens a Grist document in a browser, they will be able to view its contents without waiting for the data engine to start up. Once the data engine starts, it will run a calculation and send any updates made. Changes to the document will be blocked until the engine is started and the initial calculation is complete.
The increase in responsiveness is useful in its own right, and also reduces the impact of an extra startup time in a candidate next-generation sandbox.
A small unrelated fix is included for `core/package.json`, to catch up with a recent change to `package.json`.
A small `./build schema` convenience is added to just rebuild the typescript schema file.
Test Plan: added test; existing tests pass - small fixes needed in some cases because of new timing
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3036
Summary:
["RenameChoices", table_id, col_id, renames]
Updates the data in a Choice/ChoiceList column to reflect the new choice names.
`renames` should be a dict of `{old_choice_name: new_choice_name}`.
This doesn't touch the choices configuration in widgetOptions, that must be done separately.
Frontend to be done in another diff.
Test Plan: Added two Python unit tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3050
Summary:
Traceback is available on the Creator Panel in the formula editor. It is evaluated the same way as for normal formulas.
In case when the traceback is not available, only the error name is displayed with information that traceback is not available.
Cell with an error, when edited, shows the previous valid value that was used before the error happened (or None for new rows).
Value is stored inside the RaisedException object that is stored in a cell.
Test Plan: Created tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki, dsagal
Differential Revision: https://phab.getgrist.com/D3033
Summary: Update _create_syntax_error_code to raise an error with similar arguments to the real arguments it already has, with our modifications.
Test Plan: Updated python unit tests
Reviewers: jarek, dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3040
Summary:
See https://grist.quip.com/VKd3ASF99ezD/Outgoing-Webhooks
- 2 new DocApi endpoints: _subscribe and _unsubscribe, not meant to be user friendly or publicly documented. _unsubscribe should be given the response from _subscribe in the body, e.g:
```
$ curl -X POST -H "Authorization: Bearer 8fd4dc59ecb05ab29ae5a183c03101319b8e6ca9" "http://localhost:8080/api/docs/6WYa23FqWxGNe3AR6DLjCJ/tables/Table2/_subscribe" -H "Content-type: application/json" -d '{"url": "https://webhook.site/a916b526-8afc-46e6-aa8f-a625d0d83ec3", "eventTypes": ["add"], "isReadyColumn": "C"}'
{"unsubscribeKey":"3246f158-55b5-4fc7-baa5-093b75ffa86c","triggerId":2,"webhookId":"853b4bfa-9d39-4639-aa33-7d45354903c0"}
$ curl -X POST -H "Authorization: Bearer 8fd4dc59ecb05ab29ae5a183c03101319b8e6ca9" "http://localhost:8080/api/docs/6WYa23FqWxGNe3AR6DLjCJ/tables/Table2/_unsubscribe" -H "Content-type: application/json" -d '{"unsubscribeKey":"3246f158-55b5-4fc7-baa5-093b75ffa86c","triggerId":2,"webhookId":"853b4bfa-9d39-4639-aa33-7d45354903c0"}'
{"success":true}
```
- New DB entity Secret to hold the webhook URL and unsubscribe key
- New document metatable _grist_Triggers subscribes to table changes and points to a secret to use for a webhook
- New file Triggers.ts processes action summaries and uses the two new tables to send webhooks.
- Also went on a bit of a diversion and made a typesafe subclass of TableData for metatables.
I think this is essentially good enough for a first diff, to keep the diffs manageable and to talk about the overall structure. Future diffs can add tests and more robustness using redis etc. After this diff I can also start building the Zapier integration privately.
Test Plan: Tested manually: see curl commands in summary for an example. Payloads can be seen in https://webhook.site/#!/a916b526-8afc-46e6-aa8f-a625d0d83ec3/0b9fe335-33f7-49fe-b90b-2db5ba53382d/1 . Great site for testing webhooks btw.
Reviewers: dsagal, paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3019
Summary:
Python isdigit() returns true for unicode characters such as "²", which fail
when used as an argument to int().
Instead, be explicit about only considering characters 0-9 to be digits.
Test Plan: Added a test case which produces an error without this change.
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3027
Summary:
After updating the jenkins test workers, chrome and python changes resulting in a scattering of test failures.
* Clicking on an icon that has been transformed to mirror around the y axis fails via selenium. Not sure why. "Fixed" by asking the browser to do the click.
* There was a small change from python 3.9.6 to python 3.9.7 that affected completion of property attributes.
Worker updates here: https://phab.getgrist.com/D3029
Test Plan: these tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3031
Summary:
This unsets the `direct` flag for actions emitted when summary tables are updated. That means those actions will be ignored for access control purposes. So if a user has the right to change a source table, the resulting changes to the summary won't result in the overall action bundle being forbidden.
I don't think I've actually seen the use case that inspired this issue being filed. I could imagine perhaps a user forbidden from creating rows globally making permitted updates that could add rows in a summary (and it being desirable to allow that).
Test Plan: added tests
Reviewers: jarek
Reviewed By: jarek
Subscribers: dsagal, alexmojaki, jarek
Differential Revision: https://phab.getgrist.com/D3022
Summary:
The import dialog now has an option to 'Update existing records',
which when checked will allow for selection of 1 or more fields
to match source and destination tables on.
If all fields match, then the matched record in the
destination table will be merged with the incoming record
from the source table. This means the incoming values will
replace the destination table values, unless the incoming
values are blank.
Additional merge strategies are implemented in the data
engine, but the import dialog only uses one of the
strategies currently. The others can be exposed in the UI
in the future, and tweak the behavior of how source
and destination values should be merged in different contexts,
such as when blank values exist.
Test Plan: Python and browser tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3020
Summary:
The problem: For a data-cleaning column (one that depends on itself) `doBulkUpdateRecord` calls `prevent_recalc(should_prevent=False)``
which is supposed to cause it to get calculated eventually.
But before that it calls `_do_doc_action` -> `apply_doc_action` -> `_bring_lookups_up_to_date` which recalculates
a lookup column which eventually calls `_recompute_step(allow_evaluation=False)` on the data-cleaning column
which shouldn't really do anything significant but it both modifies the set `self.recompute_map[node]`
and then removes it from the map after it's empty.
The solution: when `allow_evaluation=False` and `self._prevent_recompute_map[node]` is nonempty,
ensure `self.recompute_map[node]` is not modified,
and check the map directly (instead of `dirty_rows` which can now be separate) to see if the set is empty before cleanup.
Test Plan: Added a lookup column to test_self_trigger, ensured that this caused the test to fail without the other two changes in engine.py.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3006
Summary:
Replacing a column leads to an unnecessary recalculation, and was happening on
every schema change. This is particularly noticeble for large docs, especially
for imports when each column's addition is a schema change in itself, so
recalculation of summary table groupings were happening many times.
Test Plan: Existing tests should pass. No tests yet for avoiding recalculation, but would be nice!
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3005
Summary:
- Grist document has a associated "locale" setting that affects how currency is formatted.
- Currency selector for number format.
Test Plan: not done
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D2977
Summary: Uses python unicodedata module to normalise a string and remove combining characters, leaving behind more ascii letters and fewer underscores
Test Plan: Added unit test
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D2994
Summary:
Our date-guessing logic analyzes text in full looking for date parts.
This diff skip all that work when text is so long that we don't need to
consider it to be a valid date.
This is a quick fix. There are probably many other cases when we don't
need to try hard to parse arbitrary text as dates.
Test Plan: Added a fixture and test case that would trigger the error without the fix.
Reviewers: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D2992
Summary: RecordSets now have new encoding and rendering analogous to Records: `['r', 'Table', [1, 2, 3]]` and `Table[[1, 2, 3]]`.
Test Plan: Added to nbrowser/TypeChange.ts.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2987
Summary:
Adds Reference List as a widget type.
Reference List is similar to Choice List: multiple references can be added
to each cell through a similar editor, and the individual references
will always reflect their current value from the referenced table.
Test Plan: Browser tests.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: paulfitz, jarek, alexmojaki, dsagal
Differential Revision: https://phab.getgrist.com/D2959
Summary: Just return a list from _get_col_subset, remove ColumnView class
Test Plan: none
Reviewers: dsagal, georgegevoian
Reviewed By: dsagal, georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D2975
Summary: Updates the summary column type correctly, rebuilds the table model
Test Plan: Added a python unit test, tested manually in browser
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2973
Summary: Detached formula uses CONTAINS()
Test Plan: Added to existing unit test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2972
Summary:
Prefix keys of `LinkingState.filterColValues` with `_contains:` when the source column is a ChoiceList or ReferenceList.
This is parsed out to make a boolean `isContainsFilter` which is kept in each value of `QueryRefs.filterTuples` (previously `filterPairs`).
Then when converting back in `convertQueryFromRefs` we construct `Query.contains: {[colId: string]: boolean}`.
Finally `getFilterFunc` uses `Query.contains` to decide what kind of filtering to do.
This is not pretty, but the existing code is already very complex and it was hard to find something that wouldn't require touching loads of code just to make things compile.
Test Plan: Added a new nbrowser test and fixture, tests that selecting a source table by summary tables grouped by a choicelist column, non-list column, and both all filter the correct data.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2940
Summary:
Move all the plugins python code into the main folder with the core code.
Register file importing functions in the same main.py entrypoint as the data engine.
Remove options relating to different entrypoints and code directories. The only remaining plugin-specific option in NSandbox is the import directory/mount, i.e. where files to be parsed are placed.
Test Plan: this
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D2965
Summary: Deletes code which was previously only used by SharedSharing.ts, which was deleted in D2894
Test Plan: no
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2960
Summary:
get_cell_value wraps RaisedException with CellError to expand the error message for the user.
This is still pretty conceptual, the comments explain some things to think about, but it works and is an improvement.
Test Plan: Updated Python unit tests
Reviewers: dsagal, paulfitz
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2928
Summary:
* Moves essential plugins to grist-core, so that basic imports (e.g. csv) work.
* Adds support for a `GRIST_SANDBOX_FLAVOR` flag that can systematically override how the data engine is run.
- `GRIST_SANDBOX_FLAVOR=pynbox` is "classic" nacl-based sandbox.
- `GRIST_SANDBOX_FLAVOR=docker` runs engines in individual docker containers. It requires an image specified in `sandbox/docker` (alternative images can be named with `GRIST_SANDBOX` flag - need to contain python and engine requirements). It is a simple reference implementation for sandboxing.
- `GRIST_SANDBOX_FLAVOR=unsandboxed` runs whatever local version of python is specified by a `GRIST_SANDBOX` flag directly, with no sandboxing. Engine requirements must be installed, so an absolute path to a python executable in a virtualenv is easiest to manage.
- `GRIST_SANDBOX_FLAVOR=gvisor` runs the data engine via gvisor's runsc. Experimental, with implementation not included in grist-core. Since gvisor runs on Linux only, this flavor supports wrapping the sandboxes in a single shared docker container.
* Tweaks some recent express query parameter code to work in grist-core, which has a slightly different version of express (smoke test doesn't catch this since in Jenkins core is built within a workspace that has node_modules, and wires get crossed - in a dev environment the problem on master can be seen by doing `buildtools/build_core.sh /tmp/any_path_outside_grist`).
The new sandbox options do not have tests yet, nor does this they change the behavior of grist servers today. They are there to clean up and consolidate a collection of patches I've been using that were getting cumbersome, and make it easier to run experiments.
I haven't looked closely at imports beyond core.
Test Plan: tested manually against regular grist and grist-core, including imports
Reviewers: alexmojaki, dsagal
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D2942
Summary:
This makes it possible to set the type of a column to ReferenceList, but the UI is terrible
ReferenceList.ts is a mishmash of ChoiceList and Reference that sort of works but something about the CSS is clearly broken
ReferenceListEditor is just a text editor, you have to type in a JSON array of row IDs. Ignore the value that's present when you start editing. I can maybe try mashing together ReferenceEditor and ChoiceListEditor but it doesn't seem wise.
I think @georgegevoian should take over here. Reviewing the diff as it is to check for obvious issues is probably good but I don't think it's worth trying to land/merge anything.
Test Plan: none
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D2914
Summary: Having CONTAINS be a class is a pain, undoing that mistake now
Test Plan: none needed
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2929
Summary: Remove repl.py, REPLTab.js, some wiring code, CSS, and a test in testscript.json.
Test Plan: NA
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2923
Summary:
Added CONTAINS 'function' which can be used in lookups
Changed LookupMapColumn._row_key_map to use right=set so one row can have many keys when CONTAINS is used.
Use CONTAINS to implement group column in summary table, while helper column in source table can reference and create multiple rows in summary table, especially when summarising by ChoiceList columns.
Use itertools.product to generate all combinations of lookup keys and groupby values.
cleanup
Test Plan: Added python unit tests.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: paulfitz, dsagal
Differential Revision: https://phab.getgrist.com/D2900
Summary:
Dealing with some things that bothered and sometimes confused me:
Make Table.Record[Set] provide the table argument automatically
Remove the classes from UserTable because they're not used anywhere and the Table/UserTable distinction is already confusing. They're not documented for users and they don't show up in autocomplete.
Remove RecordSet.Record because it was confusing me where that attribute was being set, but also this means .Record will work properly for users with columns named 'Record'.
Test Plan: existing tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2913
Summary:
The 'user' variable has a similar API to the one from access rules: it
contains properties about a user, such as their full name and email
address, as well as optional, user-defined attributes that are populated
via user attribute tables.
Test Plan: Python unit tests.
Reviewers: alexmojaki, paulfitz, dsagal
Reviewed By: alexmojaki, dsagal
Subscribers: paulfitz, dsagal, alexmojaki
Differential Revision: https://phab.getgrist.com/D2898
Summary:
API signature for autocomplete updated to add column ID, which is
necessary for exposing correct types for 'value'.
Test Plan: Unit tests.
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: jarek, alexmojaki
Differential Revision: https://phab.getgrist.com/D2896
Summary: See title. This should improve the user experience, but more importantly it's something I've wanted several times when developing (including just now) so I've been meaning to do this.
Test Plan: Expanded existing unit tests
Reviewers: dsagal, paulfitz
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2910
Summary:
This switches to using stdin/stdout for RPC calls to the sandbox, rather than specially allocated side channels. Plain text error information remains on stderr.
The motivation for the change is to simplify use of sandboxes, some of which support extra file descriptors and some of which don't.
The new style of communication is made the default, but I'm not committed to this, just that it be easy to switch to if needed. It is possible I'll need to switch the communication method again in the near future.
One reason not to make this default would be windows support, which is likely broken since stdin/stdout are by default in text mode.
Test Plan: existing tests pass
Reviewers: dsagal, alexmojaki
Reviewed By: dsagal, alexmojaki
Differential Revision: https://phab.getgrist.com/D2897
Summary:
Add python3 suite to testrun.sh
Build virtualenv called sandbox_venv3 in build script
Move xmlrunner.py into grist folder from thirdparty, since sandbox_venv3 doesn't use thirdparty and I don't know where that file comes from - unittest-xml-reporting is different.
Test Plan: this
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2886
Summary:
mkpydocs.py has been moved to the grist-help repo where it belongs.
Deleting all localstack and test/aws stuff is coming soon - not sure if it should be in this same diff.
Test Plan: this
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2891
Summary:
Run JS with a value for SANDBOX_BUFFERS_DIR, then run test_replay in python with the same value to replay just the python code.
See test_replay.py for more info.
Test Plan:
Record some data, e.g. `SANDBOX_BUFFERS_DIR=manual npm start` or `SANDBOX_BUFFERS_DIR=server ./test/testrun.sh server`.
Then run `SANDBOX_BUFFERS_DIR=server python -m unittest test_replay` from within `core/sandbox/grist` to replay the input from the JS.
Sample of the output will look like this:
```
Checking /tmp/sandbox_buffers/server/2021-06-16T15:13:59.958Z
True
Checking /tmp/sandbox_buffers/server/2021-06-16T15:16:37.170Z
True
Checking /tmp/sandbox_buffers/server/2021-06-16T15:14:22.378Z
True
```
Reviewers: paulfitz, dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2866
Summary:
- Implement UI with "Apply to new records" and "Apply on record changes"
checkboxes, and options for selecting which changes to recalculate on.
- For consistency, always represent empty RefList as None
- Fix up generated SchemaTypes to remember that values are encoded.
Included test cases for the main planned use cases:
- Auto-filled UUID column
- Data cleaning
- NOW() formula for record's last-updated timestamp.
- Updates that depend on other columns.
Test Plan: Added a browser test.
Reviewers: jarek
Reviewed By: jarek
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D2885
Summary:
Trigger formulas can be calculated for new records, or for new records and
updates to certain fields, or all fields. They do not recalculate on open,
and they MAY be set directly by the user, including for data-cleaning.
- Column metadata now includes recalcWhen and recalcDeps fields.
- Trigger formulas are NOT recalculated on open or on schema changes.
- When recalcWhen is "never", formula isn't calculated even for new records.
- When recalcWhen is "allupdates", formula is calculated for new records and
any manual (non-formula) updates to the record.
- When recalcWhen is "", formula is calculated for new records, and changes to
recalcDeps fields (which may be formula fields or column itself).
- A column whose recalcDeps includes itself is a "data-cleaning" column; a
value set by the user will still trigger the formula.
- All trigger-formulas receive a "value" argument (to support the case above).
Small changes
- Update RefLists (used for recalcDeps) when target rows are deleted.
- Add RecordList.__contains__ (for `rec in refList` or `id in refList` checks)
- Clarify that Calculate action has replaced load_done() in practice,
and use it in tests too, to better match reality.
Left for later:
- UI for setting recalcWhen / recalcDeps.
- Implementation of actions such as "Recalculate for all cells".
- Allowing trigger-formulas access to the current user's info.
Test Plan: Added a comprehensive python-side test for various trigger combinations
Reviewers: paulfitz, alexmojaki
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2872
Summary: Changes that move towards python 3 compatibility that are easy to review without much thought
Test Plan: The tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2873
Summary: Convert recursion to while loop with stack of things to invalidate.
Test Plan: Loan tracker example works now
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2867
Summary: sys.setdefaultencoding('utf8')
Test Plan: Will test against user documents to check for changes
Reviewers: dsagal, paulfitz
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2858
Summary:
Replaces https://phab.getgrist.com/D2854
Refactoring of NSandbox:
- Simplify arguments to NSandbox.spawn. Only half the arguments were used depending on the flavour, adding a layer of confusion.
- Ensure the same environment variables are passed to both flavours of sandbox
- Simplify passing down environment variables.
Implement deterministic mode with libfaketime and a seeded random instance.
- Include static prebuilt libfaketime.so.1, may need another solution in future for other platforms.
Recording pycalls:
- Add script recordDocumentPyCalls.js to open a single document outside of tests.
- Refactor out recordPyCalls.ts to support various uses.
- Add afterEach hook to save all pycalls from server tests under $PYCALLS_DIR
- Make docTools usable without mocha.
- Add useLocalDoc and loadLocalDoc for loading non-fixture documents
Test Plan:
Made a document with formulas NOW() and UUID()
Compare two document openings in normal mode:
diff <(test/recordDocumentPyCalls.js samples/d4W6NrzCMNVSVD6nWgNrGC.grist /dev/stdout) \
<(test/recordDocumentPyCalls.js samples/d4W6NrzCMNVSVD6nWgNrGC.grist /dev/stdout)
Output:
< 1623407499.58132,
---
> 1623407499.60376,
1195c1195
< "B": "bd2487f6-63c9-4f02-bbbc-5c0d674a2dc6"
---
> "B": "22e1a4fd-297f-4b86-91a2-bc42cc6da4b2"
`export DETERMINISTIC_MODE=1` and repeat. diff is empty!
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2857
Summary: Records all sandbox pycall arguments and results, saves them to JSON when the environment variable UPDATE_REGRESSION_DATA is set, otherwise checks that they match the saved JSON.
Test Plan: This is tests
Reviewers: dsagal, paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2851
Test Plan: Block read access to column A based on the condition rec.B == 1. Then setting B = 1 in a row makes the cell under A grey.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: paulfitz, dsagal
Differential Revision: https://phab.getgrist.com/D2828
Summary:
This diff discounts indirect changes for access control purposes. A UserAction that updates a cell A, which in turn causes changes in other dependent cells, will be considered a change to cell A for access control purposes.
The `engine.apply_user_actions` method now returns a `direct` array, with a boolean for each `stored` action, set to `true` if the action is attributed to the user or `false` if it is attributed to the engine. `GranularAccess` ignores actions attributed to the engine when checking for edit rights.
Subtleties:
* Removal of references to a removed row are considered direct changes.
* Doesn't play well with undos as yet. An action that indirectly modifies a cell the user doesn't have rights to may succeed, but it will not be reversible.
Test Plan: added tests, updated tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2806
Summary:
- Adds a new ChoiceList type, and widgets to view and edit it.
- Store in SQLite as a JSON string
- Support conversions between ChoiceList and other types
Test Plan: Added browser tests, and a test for how these values are stored
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2803
Summary: This treats newRec in the same way as rec in access formulas.
Test Plan: updated test for column renames; autocomplete checked manually.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2810
Summary:
* Adds a `SELF_HYPERLINK()` python function, with optional keyword arguments to set a label, the page, and link parameters.
* Adds a `UUID()` python function, since using python's uuid.uuidv4 hits a problem accessing /dev/urandom in the sandbox. UUID makes no particular quality claims since it doesn't use an audited implementation. A difficult to guess code is convenient for some use cases that `SELF_HYPERLINK()` enables.
The canonical URL for a document is mutable, but older versions generally forward. So for implementation simplicity the document url is passed it on sandbox creation and remains fixed throughout the lifetime of the sandbox. This could and should be improved in future.
The URL is passed into the sandbox as a `DOC_URL` environment variable.
The code for creating the URL is factored out of `Notifier.ts`. Since the url is a function of the organization as well as the document, some rejiggering is needed to make that information available to DocManager.
On document imports, the new document is registered in the database slightly earlier now, in order to keep the procedure for constructing the URL in different starting conditions more homogeneous.
Test Plan: updated test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2759
Summary: This was the only occurrence of the unicode() function that I could find.
Test Plan: Added a doctest case.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2750
Summary:
- Support schema changes in the presence of non-trivial ACL rules.
- Fix update of `aclFormulaParsed` when updating formulas automatically after schema change.
- Filter private metadata in broadcasts, not just fetches. Censorship method is unchanged, just refactored.
- Allow only owners to change ACL rules.
- Force reloads if rules are changed.
- Track rule changes within bundle, for clarity during schema changes - tableId and colId changes create a muddle otherwise.
- Show or forbid pages dynamically depending on user's access to its sections. Logic unchanged, just no longer requires reload.
- Fix calculation of pre-existing rows touched by a bundle, in the presence of schema changes.
- Gray out acl page for non-owners.
Test Plan: added tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2734
Summary:
With this change, if a comment is added to an ACL formula, then that comment will be offered to the user if access is denied and that rule could potentially have granted access.
The code is factored so that when access is permitted, or when partially visible tables are being filtered, there is little overhead. Comments are gathered only when an explicit denial of access.
Test Plan: added tests, updated tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2730
Summary:
An incorrect DocAction (as possible from an Undo of a non-last action)
could cause RemoveRecord on an already missing record. This used to
create an invalid undo, and wreak havoc when a series of DocActions
later fails and needs to be reverted.
To fix, consider RemoveRecord of a missing record to be a no-op.
Test Plan: Includes a new test case that triggers the problem.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2717
Summary:
Currently, an undo of a non-last action can leave the doc in an inconsistent
state. For example, it may remove a table, but fail to remove all columns of
it from metadata. We normally check that schema corresponds to metadata, but
stray columns were not visible to this check, and instead caused later table
additions to fail.
This diff fixes the check to fail the action that causes stray columns, and
to restore the doc to a consistent state.
Note that this only handles schema-metadata inconsistencies, but an undo of a
non-last action can easily create other surprises.
Test Plan: Added a test case that triggered inconsistency before, and now triggers a failed undo.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2715
Summary:
- Placed rule-updating functions in acl.py.
- Reset UI when rules update externally, or alert the user to reset if there
are pending local changes.
- Removed some unused and distracting bits from client-side DocModel.
A few improvements related to poor error handling:
- In case of missing DocActions (tickled by broken ACL rule handling), don't
add to confusion by attempting to process bad actions
- In case of missing attributes in ACL formulas, return undefined rather than
fail; the latter creates more problems.
- In case in invalid rules, fail rather than skip; this feels more correct now
that we have error checking and recovery option, and helps avoid invalid rules.
- Prevent saving invalid rules with an empty ACL formula.
- Fix bug with rule positions.
Test Plan: Added a python and browser test for table/column renames.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2698
Summary:
- When adding records, negative rowIds may now be specified. They'll be replaced by proper IDs.
- If these negative IDs are used in Reference columns in subsequent actions in
the same bundle of UserActions, they get replaced with the proper rowIds.
- Use this to sync ACLResources and ACLRules from UI in a single batch of UserActions.
- Resolve the TODOs in GranularAccess test, to no longer need to guess resource rowIds.
Test Plan: Added a python unittest for mapping IDs; updated browser tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2691
Summary:
- Fix error-handling in bundleActions(), and wait for the full bundle to complete.
(The omissions here were making it impossibly to react to errors from inside bundleActions())
- Catch problematic rules early enough to undo them, by trying out ruleCollection.update()
on updated rules before the updates are applied.
- Added checkAclFormula() call to DocComm that checks parsing and compiling
formula, and reports errors.
- In UI, prevent saving if any aclFormulas are invalid, or while waiting for the to get checked.
- Also fixed some lint errors
Test Plan: Added a test case of error reporting in ACL formulas.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2689
Summary:
- For comparing for equality of encoding, do better at approximating what's equal in JSON.
- Fix loading of "RaisedException" values so that they can match an equivalent
exception raised when the formula is re-evaluated.
Test Plan: Added another column to the test that verifies the Calculate action.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2682
Summary:
- Replace unicode strings with byte strings when decoding values in sandbox.
- Columns that rely on float values should derive from NumericColumn, so
that set() ensures that a float is stored even if loading an int.
- Parse unmarshallable values (['U']) into an object that can be encoded
back to the same value (rather than info a RaisedException).
- Compare NaN's as equal for deciding whether a change is a no-op.
Unrelated:
- Removed a tiny bit of unhelpful logging
Test Plan:
Added a test case that reproduces several causes of Calculate
discrepancies by loading various values into various types of formula columns.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2676
Summary:
This can happen after "Detach" is used on a summary table.
Includes a unittest reproducing the problem case.
Test Plan: Included unittest fails without the one-line tweak.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2672
Summary:
- Added fields to _grist_ACLRules for the new Granular ACL representation
- Include a corresponding migration.
- Added ACLPermissions module with merging PermissionSets and converting to/from string.
- Implemented parsing of ACL formulas and compiling them into JS functions.
- Add automatic parsing of ACL formulas when ACLRules are added or updated.
- Convert GranularAccess to load and interpret new-style rules.
- Convert ACL UI to load and save new-style rules.
For now, no attempt to do anything better on the server or UI side, only to
reproduce previous behavior.
Test Plan: Added unittests for new files; fixed those for existing files.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2664
Summary:
The new plans for granular access control are different and handled by
node.js. Some of the same tables will be reused, of which we never made
real use before except for expecting certain specific initial records.
This diff removes the old logic, replacing it with a stub that satisfies
the interface expected by other code.
It also removes several unused UserActions: AddUser/RemoveUser/
AddInstance/RemoveInstance.
Test Plan: Existing tests should pass.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2662
Summary:
Loading all user data to run a migration is risky (creates more than usual
memory pressure), and almost never needed (only one migration requires it).
This diff attempts to run migrations using only metadata (_grist_* tables),
but retries if the sandbox tells it that all data is needed.
The intent is for new migrations to avoid needing all data.
Test Plan: Added a somewhat contrived unittest.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2659
Summary:
- Introduce a new SQLiteDB migration, which adds DB columns for formula columns
- Newly added columns have the special ['P'] (pending) value in them
(in order to show the usual "Loading..." on the first load that triggers the migration)
- Calculated values are added to .stored/.undo fields of user actions.
- Various changes made in the sandbox to include .stored/.undo in the right order.
- OnDemand tables ignore stored formula columns, replacing them with special SQL as before
- In particular, converting to OnDemand table leaves stale values in those
columns, we should maybe clean those out.
Some tweaks on the side:
- Allow overriding chai assertion truncateThreshold with CHAI_TRUNCATE_THRESHOLD
- Rebuild python automatically in watch mode
Test Plan: Fixed various tests, updated some fixtures. Many python tests that check actions needed adjustments because actions moved from .stored to .undo. Some checks added to catch situations previously only caught in browser tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2645
Summary:
This is a hacky solution that unfortunately relies on internal workings of ACE
autocomplete popups. I don't see a less hacky one if we stick with ACE
autocomplete.
Test Plan: Added a test case for links to test/nbrowser/Formulas.ts
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2610
Summary:
This makes it possible to serve a table or tables only to owners.
* The _grist_ACLResources table is abused (temporarily) such that rows of the form `{colId: '~o', tableId}` are interpreted as meaning that `tableId` is private to owners.
* Many websocket and api endpoints are updated to preserve the privacy of these tables.
* In a document where some tables are private, a lot of capabilities are turned off for non-owners to avoid leaking info indirectly.
* The client is tweaked minimally, to show '-' where a page with some private material would otherwise go.
No attempt is made to protect data from private tables pulled into non-private tables via formulas.
There are some known leaks remaining:
* Changes to the schema of private tables are still broadcast to all clients (fixable).
* Non-owner may be able to access snapshots or make forks or use other corners of API (fixable).
* Changing name of table makes it public, since tableId in ACLResource is not updated (fixable).
Security will require some work, the attack surface is large.
Test Plan: added tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2604
Summary:
- Disable a pointless timing check in Python that occasionally fails.
- Make the test of InvalidValues more robust by waiting for calculated values to load.
- Make Snapshots test more robust by waiting for an action that precedes a URL change.
Test Plan: These tests should fail less often when the tested logic is correct.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2609
Summary:
- Make suggestions less case-sensitive (not entirely case-insensitive, but
allow top-level suggestions to match in all-lowercase)
- Add function signatures to suggestions for Grist functions.
- Excel-like functions that are present but not implemented are no longer
offered as suggestions.
Test Plan:
Added a test case on python side, and a browser test case for how suggestions
are rendered and inserted.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2608
Summary:
- Change RECORD's dates_as_str default to False.
- Reimplement objtype encode_object/decode_object with less machinery.
- Implement encoding of dicts (with string keys).
- Make lists and dicts encode values recursively.
- Implement encoding/decoding in the client
- Decode automatically in plugins' fetchSelectedTable/Record, with an option to skip.
Test Plan: Tested manually, not sure what tests may be affected yet.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2593
Summary:
- Instead of sending an "UnmarshallableError" as an exception, introduce an
"Unmarshallable" type of value, represented as ['U', repr(value)]
- Unmarshallable values are rendered using a bluish text color, no longer a
pink background.
- Factor out ErrorDom to be simpler and cleaner.
- Add GristObjCode enum, and simplify related helpers.
- Use safe_repr() for when repr() itself fails
- Handle conversion errors using safe_repr() when str() fails
Test Plan: Added a test case based on a fixture covering a bunch of cases.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2584
Summary:
Examining a Record is currently difficult, because its columns are hard to
list (and to use), and CircularRef errors hard to avoid. The RECORD function
takes care of this mess to return a simple dictionary of values.
- Supports dates_as_iso=False flag to turn off the translation of date/datetime
objects to strings.
- Supports expand_refs=True flag to apply RECORD() to encountered values of
type Record, for a single level of nesting.
Test Plan: Added a unittest for RECORD()
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2582
Test Plan: Added a test case for this, which fails without the change.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2569
Summary:
this moves sandbox/grist to core, and adds a requirements.txt
file for reconstructing the content of sandbox/thirdparty.
Test Plan:
existing tests pass.
Tested core functionality manually. Tested docker build manually.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2563
Alex Hall
Paul Fitzpatrick
Jarosław Sadziński
Cyprien P
Dmitry S
Edward Betts
Karthikeyan Singaravelan
George Gevoian
Natalie Misasi