webfuse

webfuse combines libwebsockets and libfuse. It allows ot attach a remote filesystem via websockets.

Contents

• Motivation
• Concept
• Similar Projects
• API
• Build and run
• Dependencies

Motivation

Many embedded devices, such as smart home or IoT devices are very limited regarding to their (non-volatile) memory resources. Such devices are typically comprised of an embedded linux and a small web server, providing an interface for maintenance purposes.

Some use cases, such as firmware update, require to transfer (larger) files to the device. The firmware file is often stored multiple times on the device:

1. cached by the web server, e.g. lighttpd
2. copied to locally, e.g. /tmp
3. uncompressed, also to /tmp

Techniques like SquashFS help to avoid the third step, since the upgrade file can be mounted directly. RAUC shows the use of SquashFS within an update facility.
However at least one (unecessary) copy of the upload file is needed on the device.

To avoid Steps 1 and 2, it would be great to keep the update file entirely in web server, just like NFS or WebDAV. Unfortunately, NFS is not based on any protocol, natively usable by a web application. WebDAV is based on HTTP, but it needs a server providing the update file.

webfuse solves this problem by using the WebSocket protocol. The emdedded device runs a service, known as webfuse adapter, awaiting incoming connections, e.g. from a web browser. The browser acts as a file system provider, providing the update file to the device.

Concept

With webfuse it is possible to implement remote filesystems based on websockets. A reference implementation of such a daemon is provided within the examples. The picture above describes the workflow:

• The websocket filesystem daemon (webfuse daemon) waits for incoming connections.

• A remote filesystem provider connects to webfuse daemon via websocket protocol and adds one or more filesystems.
  Note: the examples include such a provider implemented in HTML and JavaScript.

• Whenever the user makes filesystem requests, such as ls, the request is redirected via webfuse daemon to the connected filesystem provider

Currently all requests are initiated by webfuse daemon and responded by filesystem provider. This may change in future, e.g. when authentication is supported.

Filesystem represenation

To handle multiple filesystems, that are registered by one or more providers, webfuse daemon maintains a directory structure as shown above.

• mount_point is the entry point of the drectory structure

• fwupdate is a name defined by the provider when filesystem was registered
  Note: the picture above shows two providers, where both registered a filesystem named "fwupdate"

• <uuid> is the filesystem id choosen by webfuse daemon to distinguish different filesystems

• default is a symbolic link maintained by webfuse daemon to identify the default filesystem

This directoy structure allows to handle multiple filesystems registered by multiple providers. It can be used as a kind of service registry, where each filesystem represents a service. The named subdirectores distinguish differend service types. The symbolic link default can be used to identify the default service and the listing of a named subdirectory can be used to list available services of a particular type.

Similar Projects

Davfs2

davfs2 is a Linux file system driver that allows to mount a WebDAV resource. WebDAV is an extension to HTTP/1.1 that allows remote collaborative authoring of Web resources.

Unlike webfuse, davfs2 mounts a remote filesystem locally, that is provided by a WebDAV server. In contrast, webfuse starts a server awaiting client connections to attach the remote file system.

API

Requests, responses and notifications

There are three types of messages, used for communication between webfuse daemon and filesystem provider. All message types are encoded in JSON and strongly inspired by JSON-RPC.

Request

A request is used by a sender to invoke a method on the receiver. The sender awaits a response from the receiver. Since requests and responses can be sendet or answered in any order, an id is provided in each request to identify it.

{
  "method": <method_name>,
  "params": <params>,
  "id"    : <id>
}

Item	Data type	Description
method_name	string	name of the method to invoke
params	array	method specific parameters
id	integer	id, which is repeated in response

Response

A response is used to answer a prior request. There are two kinds of responses:

Successful Results

{
   "result": <result>,
   "id": <id>
}

Item	Data type	Description
result	any	request specific result
id	integer	id, same as request

Error notifications

{
   "error": {
     "code": <code>
   },
   "id": <id>
}

Item	Data type	Description
code	integer	error code
id	integer	id, same as request

Error codes

Symbolic name	Code	Description
GOOD	0	no error
BAD	1	generic error
BAD_NOTIMPLEMENTED	2	method not implemented
BAD_TIMEOUT	3	timeout occured
BAD_BUSY	4	resource busy
BAD_FORMAT	5	invalid formt
BAD_NOENTRY	101	invalid entry
BAD_ACCESS_DENIED	102	access not allowed

Notification

Notfications are used to inform a receiver about something. Unlike requests, notifications are not answered. Therefore, an id is not supplied.

{
  "method": <method_name>,
  "params": <params>
}

Item	Data type	Description
method_name	string	name of the method to invoke
params	array	method specific parameters

Requests (Adapter -> Provider)

lookup

Retrieve information about a filesystem entry by name.

webfuse daemon: {"method": "lookup", "params": [<filesystem>, <parent>, <name>], "id": <id>}
fs provider: {"result": {
    "inode": <inode>,
    "mode" : <mode>,
    "type" : <type>,
    "size" : <size>,
    "atime": <atime>,
    "mtime": <mtime>,
    "ctime": <ctime>
    }, "id": <id>}

Item	Data type	Description
filesystem	string	name of the filesystem
parent	integer	inode of parent directory (1 = root)
name	string	name of the filesystem object to look up
inode	integer	inode of the filesystem object
mode	integer	unix file mode
type	"file" or "dir"	type of filesystem object
size	integer	required for files; file size in bytes
atime	integer	optional; unix time of last access
mtime	integer	optional; unix time of last modification
ctime	intefer	optional; unix time of last metadata change

getattr

Get file attributes.

webfuse daemon: {"method": "getattr", "params": [<filesystem>, <inode>], "id": <id>}
fs provider: {"result": {
    "mode" : <mode>,
    "type" : <type>,
    "size" : <size>,
    "atime": <atime>,
    "mtime": <mtime>,
    "ctime": <ctime>
    }, "id": <id>}

Item	Data type	Description
filesystem	string	name of the filesystem
inode	integer	inode of the filesystem object
mode	integer	unix file mode
type	"file" or "dir"	type of filesystem object
size	integer	required for files; file size in bytes
atime	integer	optional; unix time of last access
mtime	integer	optional; unix time of last modification
ctime	intefer	optional; unix time of last metadata change

readdir

Read directory contents.
Result is an array of name-inode pairs for each entry. The generic entries "." and ".." should also be provided.

webfuse daemon: {"method": "readdir", "params": [<filesystem>, <dir_inode>], "id": <id>}
fs provider: {"result": [
    {"name": <name>, "inode": <inode>},
    ...
    ], "id": <id>}

Item	Data type	Description
filesystem	string	name of the filesystem
dir_inode	integer	inode of the directory to read
name	integer	name of the entry
inode	integer	inode of the entry

open

Open a file.

webfuse daemon: {"method": "readdir", "params": [<filesystem>, <inode>, <flags>], "id": <id>}
fs provider: {"result": {"handle": <handle>}, "id": <id>}

Item	Data type	Description
filesystem	string	name of the filesystem
inode	integer	inode of the file
flags	integer	access mode flags (see below)
handle	integer	handle of the file

Flags

Symbolic name	Code	Description
O_ACCMODE	0x003	access mode mask
O_RDONLY	0x000	open for reading only
O_WRONLY	0x001	open for writing only
O_RDWR	0x002	open for reading an writing
O_CREAT	0x040	create (a new) file
O_EXCL	0x080	open file exclusivly
O_TRUNC	0x200	open file to truncate
O_APPEND	0x400	open file to append

close

Informs filesystem provider, that a file is closed.
Since close is a notification, it cannot fail.

webfuse daemon: {"method": "close", "params": [<filesystem>, <inode>, <handle>, <flags>], "id": <id>}

Item	Data type	Description
filesystem	string	name of the filesystem
inode	integer	inode of the file
handle	integer	handle of the file
flags	integer	access mode flags (see open)

read

Read from an open file.

webfuse daemon: {"method": "close", "params": [<filesystem>, <inode>, <handle>, <offset>, <length>], "id": <id>}
fs provider: {"result": {
    "data": <data>,
    "format": <format>,
    "count": <count>
    }, "id": <id>}

Item	Data type	Description
filesystem	string	name of the filesystem
inode	integer	inode of the file
handle	integer	handle of the file
offset	integer	Offet to start read operation
length	integer	Max. number of bytes to read
data	integer	handle of the file
format	string	Encoding of data (see below)
count	integer	Actual number of bytes read

Format

Format	Description
"identiy"	Use data as is; note that JSON strings are UTF-8 encoded
"base64"	data is base64 encoded

Requests (Provider -> Adapter)

add_filesystem

Adds a filesystem.

fs provider: {"method": "add_filesytem", "params": [<name>], "id": <id>}
webfuse daemon: {"result": {"id": <name>}, "id": <id>}

Item	Data type	Description
name	string	name and id of filesystem

authtenticate

Authenticate the provider.
If authentication is enabled, a provider must be authenticated by the adapter before filesystems can be added.

fs provider: {"method": "authenticate", "params": [<type>, <credentials>], "id": <id>}
webfuse daemon: {"result": {}, "id": <id>}

Item	Data type	Description
type	string	authentication type (see below)
credentials	object	credentials to authenticate

authentication types

• username: authenticate via username and password
  {"username": <username>, "password": <password>}

Authentication

By default, webfuse daemon will redirect each filesystem call to the first connected provider without any authentication. This might be good for testing purposes or when an external authentication mechanism is used. In some use cases, explicit authentication is needed. Therefore, authentication can be enabled within webfuse daemon.

When authentication is enabled, filesystem calls are only redirected to a connected provider, after authenticate has succeeded.

Enable authentication

Authentication is enabled, if one or more authenticators are registered via wf_server_config.

static bool authenticate(struct wf_credentials * creds, void * user_data)
{
    char const * username = wf_credentials_get(creds, "username");
    char const * password = wf_credentials_get(creds, "password");

   return ((NULL != username) && (0 == strcmp(username, "bob")) &&
           (NULL != password) && (0 == strcmp(password, "???")));
}

wf_server_config * config = wf_server_config_create();
wf_server_config_add_authenticator(config, "username", &authenticate, NULL);

wf_server * server = wf_server_create(config);
//...

Authenticator types and credentidals

Each authenticator is identified by a user defined string, called type. The type is provided by the authenticate request, so you can define different authenticators for different authentication types, e.g. username, certificate, token.

Actually, only one type is used: username
It is strongly recommended to prefix custom authenticator types with an underscore (_) to avoid name clashes.

The wf_credentialsstruct represents a map to access credentials as key-value pairs, where both, key and value, are of type string.

username

The authenticator type username is used to authenticate via username and password. Valid credentials should contain two keys.

• username refers to the name of the user
• password refers to the password of the user

Note that no further encryption is done, so this authenticator type should not be used over unencrypted websocket connections.

Build and run

To install dependencies, see below.

cd webfuse
mkdir .build
cd .build
cmake ..
mkdir test
./webfused -m test --document_root=../exmaple/daemon/www --port=4711

Build options

By default, unit tests and example application are enabled. You can disable them using the following cmake options:

• WITHOUT_TESTS: disable tests
  cmake -DWITHOUT_TESTS=ON ..

• WITHOUT_EXAMPLE: disable example
  cmake -DWITHOUD_EXAMPLE=ON ..

Dependencies

• libfuse3
• libwebsockets
• Jansson
• GoogleTest (optional)

Installation from source

libfuse

wget -O fuse-3.1.1.tar.gz https://github.com/libfuse/libfuse/archive/fuse-3.1.1.tar.gz
tar -xf fuse-3.1.1.tar.gz
cd libfuse-fuse-3.1.1
./makeconf.sh
./configure
make
sudo make install

libwebsockets

wget -O libwebsockets-3.1.0.tar.gz https://github.com/warmcat/libwebsockets/archive/v3.1.0.tar.gz
tar -xf libwebsockets-3.1.0.tar.gz
cd libwebsockets-3.1.0
mkdir .build
cd .build
cmake ..
make
sudo make install

Jansson

wget -O libjansson-2.12.tar.gz https://github.com/akheron/jansson/archive/v2.12.tar.gz
tar -xf libjansson-2.12.tar.gz
cd jansson-2.12
mkdir .build
cd .build
cmake ..
make
sudo make install

GoogleTest

Installation of GoogleTest is optional webfuse library, but required to compile tests.

wget -O gtest-1.8.1.tar.gz https://github.com/google/googletest/archive/release-1.8.1.tar.gz
tar -xf gtest-1.8.1.tar.gz
cd googletest-release-1.8.1
mkdir .build
cd .build
cmake ..
make
sudo make install