Quoting Wikipedia:
> The name localhost is a **commonly** defined hostname for the loopback
> interface in most TCP/IP systems, resolving to the IP addresses
> 127.0.0.1 in IPv4 and ::1 for IPv6.
Summary:
Dropdown conditions let you specify a predicate formula that's used to filter
choices and references in their respective autocomplete dropdown menus.
Test Plan: Python and browser tests (WIP).
Reviewers: jarek, paulfitz
Reviewed By: jarek
Subscribers: dsagal, paulfitz
Differential Revision: https://phab.getgrist.com/D4235
Summary:
- /timing/start endpoint to start collecting information
- /timing/stop endpoint to stop collecting
- /timing to retrive data gatherd so far
Timings are collected for all columns (including hidden/helpers/system)
Test Plan: Added new
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D4230
Summary:
Shares and documents would both produce a rule set for the same column
if the document rule set was for multiple columns. In this case, it was causing
one of the rules to be overwritten by the other (specifically, the rule granting
access to form references was not being applied in shares). The symptom was
`null` values in place of the referenced table's values.
We address this by splitting any rule sets for multiple columns that are also
affected by shares, so that they can be overridden by shares without causing a
conflicting rule set to be created (i.e. 2 column rule sets containing the same column).
Test Plan: Server tests.
Reviewers: dsagal, paulfitz
Reviewed By: dsagal, paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D4208
* Shutdown Doc worker when it is not considered as available in Redis
* Use isAffirmative for GRIST_MANAGED_WORKERS
* Upgrade Sinon for the tests
* Run Smoke test with pages in English
* Add logic in /status endpoint
The motivation for supporting an alternative to WebSockets is that while all browsers supported by Grist offer native WebSocket support, some networking environments do not allow WebSocket traffic.
Engine.IO is used as the underlying implementation of HTTP long polling. The Grist client will first attempt a regular WebSocket connection, using the same protocol and endpoints as before, but fall back to long polling using Engine.IO if the WebSocket connection fails.
Include these changes:
- CORS websocket requests are now rejected as a stronger security measure. This shouldn’t affect anything in practice; but previously it could be possible to make unauthenticated websocket requests from another origin.
- GRIST_HOST variable no longer affects CORS responses (also should not affect anything in practice, as it wasn't serving a useful purpose)
Summary:
- Add InstallAdmin class to identify users who can manage Grist installation.
This is overridable by different Grist flavors (e.g. different in SaaS).
It generalizes previous logic used to decide who can control Activation
settings (e.g. enable telemetry).
- Implement a basic Admin Panel at /admin, and move items previously in the
"Support Grist" page into the "Support Grist" section of the Admin Panel.
- Replace "Support Grist" menu items with "Admin Panel" and show only to admins.
- Add "Support Grist" links to Github sponsorship to user-account menu.
- Add "Support Grist" button to top-bar, which
- for admins, replaces the previous "Contribute" button and reopens the "Support Grist / opt-in to telemetry" nudge (unchanged)
- for everyone else, links to Github sponsorship
- in either case, user can dismiss it.
Test Plan: Shuffled some test cases between Support Grist and the new Admin Panel, and added some new cases.
Reviewers: jarek, paulfitz
Reviewed By: jarek, paulfitz
Differential Revision: https://phab.getgrist.com/D4194
This check should be unnecessary for stores with strong consistency guarantees (virtually everywhere now).
---------
Co-authored-by: Florent FAYOLLE <florent.fayolle@beta.gouv.fr>
Summary:
If the longer OpenAI model exceeds the OpenAPI context length, we now perform another retry with a
shorter variant of the formula prompt. The shorter prompt excludes non-referenced tables and lookup
method definitions, which should help reduce token usage in documents with larger schemas.
Test Plan: Server test.
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Subscribers: JakubSerafin
Differential Revision: https://phab.getgrist.com/D4184
Summary:
This gives a mechanism for controlling access control within a document that is distinct from (though implemented with the same machinery as) granular access rules.
It was hard to find a good way to insert this that didn't dissolve in a soup of complications, so here's what I went with:
* When reading rules, if there are shares, extra rules are added.
* If there are shares, all rules are made conditional on a "ShareRef" user property.
* "ShareRef" is null when a doc is accessed in normal way, and the row id of a share when accessed via a share.
There's no UI for controlling shares (George is working on it for forms), but you can do it by editing a `_grist_Shares` table in a document. Suppose you make a fresh document with a single page/table/widget, then to create an empty share you can do:
```
gristDocPageModel.gristDoc.get().docData.sendAction(['AddRecord', '_grist_Shares', null, {linkId: 'xyz', options: '{"publish": true}'}])
```
If you look at the home db now there should be something in the `shares` table:
```
$ sqlite3 -table landing.db "select * from shares"
+----+------------------------+------------------------+--------------+---------+
| id | key | doc_id | link_id | options |
+----+------------------------+------------------------+--------------+---------+
| 1 | gSL4g38PsyautLHnjmXh2K | 4qYuace1xP2CTcPunFdtan | xyz | ... |
+----+------------------------+------------------------+--------------+---------+
```
If you take the key from that (gSL4g38PsyautLHnjmXh2K in this case) and replace the document's urlId in its URL with `s.<key>` (in this case `s.gSL4g38PsyautLHnjmXh2K` then you can use the regular document landing page (it will be quite blank initially) or API endpoint via the share.
E.g. for me `http://localhost:8080/o/docs/s0gSL4g38PsyautLHnjmXh2K/share-inter-3` accesses the doc.
To actually share some material - useful commands:
```
gristDocPageModel.gristDoc.get().docData.getMetaTable('_grist_Views_section').getRecords()
gristDocPageModel.gristDoc.get().docData.sendAction(['UpdateRecord', '_grist_Views_section', 1, {shareOptions: '{"publish": true, "form": true}'}])
gristDocPageModel.gristDoc.get().docData.getMetaTable('_grist_Pages').getRecords()
gristDocPageModel.gristDoc.get().docData.sendAction(['UpdateRecord', '_grist_Pages', 1, {shareRef: 1}])
```
For a share to be effective, at least one page needs to have its shareRef set to the rowId of the share, and at least one widget on one of those pages needs to have its shareOptions set to {"publish": "true", "form": "true"} (meaning turn on sharing, and include form sharing), and the share itself needs {"publish": true} on its options.
I think special shares are kind of incompatible with public sharing, since by their nature (allowing access to all endpoints) they easily expose the docId, and changing that would be hard.
Test Plan: tests added
Reviewers: dsagal, georgegevoian
Reviewed By: dsagal, georgegevoian
Subscribers: jarek, dsagal
Differential Revision: https://phab.getgrist.com/D4144
After adding a batch of new server tests, some interactions between
tests have shown up via a shared database. This sets an existing flag
for dealing with this problem, that is used during browser tests but
hadn't been needed before for server tests.
Summary:
Fixes bug described in https://grist.slack.com/archives/C069RUP71/p1699643458649019
Decodes cell values obtained from `InfoView.get` when evaluating user-defined ACL formulas, i.e. the result of `rec.foo` in such a formula. In particular this is so that `rec.some_list` loses the leading `L` type code and behaves sensibly in an expression like `thing in rec.some_list`.
`InfoView.get` is called in many places, but for every usage I found other than here, leaving the cell values encoded was best.
Test Plan: Added two unit server tests. The first is for the main bug involving lists. The second checks the only other plausible way I could think of that this change affects behaviour, and it seems to be for the better since both tests failed before. Most operations involving non-primitive cell values don't do anything sensible with or without decoding, so behaviour shouldn't change meaningfully in those cases.
Reviewers: georgegevoian, paulfitz
Reviewed By: georgegevoian, paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D4123
Summary:
- Node has a strong recommendation to assume bad state and exit promptly on
unhandled exceptions and rejections. We follow it, and only make an effort to
clean up before exiting, and to log the error in a more standard way.
- The only case seen in recent month of an unhandled rejection was for
attempting to write overly large JSON to a Client websocket. Ensure that's
handled, and add a test case that artificially reproduces this scenario.
Test Plan:
Added a test case for failing write to Client, and a test case that unhandled
errors indeed kill the server but with an attempt at cleanup.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4124
Summary:
Adds a new Record Card view section to each non-summary table, which can be from opened from various parts of the Grist UI to view and edit records in a popup card view.
Work is still ongoing, so the feature is locked away behind a flag; follow-up work is planned to finish up the implementation and add end-to-end tests.
Test Plan: Python and server tests. Browser tests will be included in a follow-up.
Reviewers: jarek, paulfitz
Reviewed By: jarek
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D4114
Summary:
By default, only respect GRIST_FORWARD_AUTH_HEADER on login endpoints; sessions are used elsewhere.
With GRIST_IGNORE_SESSION, do not use sessions, and respect GRIST_FORWARD_AUTH_HEADER on all endpoints.
GRIST_PROXY_AUTH_HEADER is now a synonym to GRIST_FORWARD_AUTH_HEADER.
Test Plan: Fixed tests. Tested first approach (no GRIST_IGNORE_SESSION) with grist-omnibus manually. Tested the second approach (with GRIST_IGNORE_SESSION) with a Apache-based setup enforcing http basic auth on all endpoints.
Reviewers: paulfitz, georgegevoian
Reviewed By: paulfitz, georgegevoian
Differential Revision: https://phab.getgrist.com/D4104
The getHostType() now returns "native" when the host corresponds to the value of APP_DOC_INTERNAL_URL. T
While trying to scale, with a different internal and public URL for doc workers, and having configured the org to be specified in the path (GRIST_ORG_IN_PATH=true), the APP_DOC_INTERNAL_URL parameter was not treated as internal which made the connection between home server and doc workers impossible.
---------
https://github.com/gristlabs/grist-core/pull/715
Co-authored-by: Florent FAYOLLE <florent.fayolle@beta.gouv.fr>
Summary: Adds a handful of new telemetry events, and makes a few tweaks to allow for better organization of telemetry.
Test Plan: Manual.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D4100
Summary:
This adds support for bundling custom widgets with the Grist app, as follows:
* Adds a new `widgets` component to plugins mechanism.
* When a set of widgets is provided in a plugin, the html/js/css assets for those widgets are served on the existing untrusted user content port.
* Any bundled `grist-plugin-api.js` will be served with the Grist app's own version of that file. It is important that bundled widgets not refer to https://docs.getgrist.com for the plugin js, since they must be capable of working offline.
* The logic for configuring that port is updated a bit.
* I removed the CustomAttachedView class in favor of applying settings of bundled custom widgets more directly, without modification on view.
Any Grist installation via docker will need an extra step now, since there is an extra port that needs exposing for full functionality. I did add a `GRIST_TRUST_PLUGINS` option for anyone who really doesn't want to do this, and would prefer to trust the plugins and have them served on the same port.
Actually making use of bundling will be another step. It'll be important to mesh it with our SaaS's use of APP_STATIC_URL for serving most static assets.
Design sketch: https://grist.quip.com/bJlWACWzr2R9/Bundled-custom-widgets
Test Plan: added a test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4069
Summary:
Changes the minimum version of Node to 18, and updates the Docker images and GitHub workflows to build Grist with Node 18.
Also updates various dependencies and scripts to support building running tests with arm64 builds of Node.
Test Plan: Existing tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3968
Summary:
Previously, when a table was deleted, ref/reflist columns pointing at that table were deleted as well. This diff changes that, converting the columns to a suitable type instead.
See here for discussion and decisions: https://grist.slack.com/archives/C069RUP71/p1686060034848139
Test Plan: Added Python tests for most cases, and a DocApi test for where Python has to call JS code to convert the values.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D4011
* `GRIST_ANON_PLAYGROUND`: When set to 'false' deny anonymous users access to the home page
* `GRIST_FORCE_LOGIN`: Much like `GRIST_ANON_PLAYGROUND` but don't support anonymous access at all (features like sharing docs publicly requires authentication)
---------
Co-authored-by: Florent FAYOLLE <florent.fayolle@beta.gouv.fr>
* add an endpoint for doing SQL selects
This adds an endpoint for doing SQL selects directly on a Grist document. Other kinds of statements are not supported. There is a default timeout of a second on queries.
This follows loosely an API design by Alex Hall.
Co-authored-by: jarek <jaroslaw.sadzinski@gmail.com>
Every fetch made from the client is logged to the console.
But this isn't really necessary, and is particularly confusing
in grist-static, where those fetches are virtualized.
Tests in grist-saas may need adjusting to remove the logger.
When an ACL formula fails to be run, a warning is printed. However, it is painful to know which formula is concerned by the warning.
ACL: if RHS is null, return false for "in" and "not in"
Summary:
move a test of access control formulas
to grist-core
Test Plan: moving a test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4013
Summary:
Moves assistant test to core.
Fixes new name for constaint.
Works around a chai-as-promised issue.
Test Plan: this
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4010
