Summary:
When two widgets are linked by same-record linking, and the source of that link is also filter-linked, then it will pick up default values from its own filter-link source, but the same-record-link target didn't. This fixes that so that default values are filled in intuitively.
Moved the logic of linkingState, linkingFilter, and getDefaultColValues from BaseView.js to LinkingState.ts and ViewSectionRec.ts. In particular getDefaultColValues is now a property of LinkingState which may be copied from the source view section for a same-record link.
Note that `ViewSectionRec.linkingFilter` no longer uses `computerBuilder` and thus doesn't ignore dependencies inside LinkingState any more. I couldn't figure out how to make `linkingFilter` a `pureComputed` (otherwise I get recursion errors) that ignores dependencies. In any case, it's now important to have a dependency on `srcSection.linkingState()` for `getDefaultColValues` to work correctly, so I think this is for the best.
Test Plan: Added a new nbrowser test and fixture.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3238
Summary:
Improving user experience on summary columns.
- Showing 'not-allowed' cursor on sections/menus that can't be changed
- Disabling menu options and buttons in the column behavior section that converts a formula column to a data column
- Showing nicer error message about converting formula to a data column.
Test Plan: manual tests, no behavior change
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3222
Summary:
- WelcomeQuestions implements the new popup.
- Popup shows up on any doc-list page, the first time the user visits one after
signing up and setting their name.
- Submits responses to the same "New User Questions" doc, which has been
changed to accept two new columns (ChoiceList of use_cases, and Text for
use_other).
- Improve modals on mobile along the way.
Test Plan: Added browser tests and tested manually
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3213
Summary:
The user profile dialog is now a separate page, in preparation
for upcoming work to enable MFA. This commit also contains
some MFA changes, but the UI is currently disabled and the
implementation is limited to software tokens (TOTP) only.
Test Plan:
Updated browser tests for new profile page. Tests for MFAConfig
and CognitoClient will be added in a later diff, once the UI is enabled.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3199
Summary:
Previously, ref/reflist columns were formatted entirely based on their visible column, since they received values from the visible or display columns rather than the actual row IDs. This creates `ReferenceFormatter` and `ReferenceListFormatter` which still delegate most of the formatting work to a visible column formatter but fix a few issues:
- ReferenceList columns now actually use the options (e.g. date format) of the visible column to format their elements. Previously they were formatted generically because the visible column formatter wasn't expecting a list.
- Invalid references aren't formatted with an `#Invalid Ref` prefix.
- When the ref column displays the Row ID, it doesn't have a visible or display column. Previously this led to the references being formatted as just numbers in most cases, with special code in the widget to display them like `Table1[2]`. Now they are consistently formatted in that style throughout.
Test Plan: Updated existing tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3212
Summary:
Adding configuration options for CustomWidgets.
Custom widgets can now store options (in JSON) in viewSection metadata.
Changes in grist-plugin-api:
- Adding onOptions handler, that will be invoked when the widget is ready and when the configuration is changed
- Adding WidgetAPI - new API to read and save a configuration for widget.
Changes in Grist:
- Rewriting CustomView code, and extracting code that is responsible for showing the iframe and registering Rpc.
- Adding Open Configuration button to Widget section in the Creator panel and in the section menu.
- Custom Widgets can implement "configure" method, to show configuration screen when requested.
Test Plan: Browser tests.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3185
Summary: When an editor is activated by typing, the active view should be scrolled to the active record.
Test Plan: new tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3196
Summary:
Document owners can now remove doc tours by pressing the button located
to the right of 'Tour of this Document' in the left panel.
Test Plan: Browser test.
Reviewers: jarek
Reviewed By: jarek
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3202
Summary:
This turns out necessary because ReferenceList columns are formatted
using the formatter of the associated visibleCol. This works correctly
in dedicated widgets, but in generic code (like SearchModel here), this
formatter needs to handle unexpected values (of type ReferenceList).
Without the fix, it produces JS errors when search reaches a
RefList:<Date> column.
A better fix would allow a formatter to know that it expects a ReferenceList,
AND to know how to format each value of it, but that's a bigger question
that's outside the scope of this fix.
Test Plan: Includes a browser test which reproduces the bug.
Reviewers: cyprien
Reviewed By: cyprien
Differential Revision: https://phab.getgrist.com/D3195
Summary:
Two bugs fixed:
1. On search, when the first result is in the active record, GridView wasn't scrolling to the active record.
2. When an active record was not visible, GridView wasn't scrolling to the active record when the column index was changed.
The problem was that the scrolling behavior was based only on rowIndex which isn't changed (and doesn't notify subscribers) when a column index changes or when the search highlights a cell.
This diff makes the computed depend also on the fieldIndex, and is introducing a new method that can scroll to the active record on demand (which is used by the search).
Test Plan: Updated tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3191
Summary:
Fixing a bug: When removing a page with linked sections and then undoing, there are two JS errors raised:
- flexSize is not a function
- getter is not a function
Test Plan: nbrowser tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3192
Summary:
Some things (like rendering cells) use the `visibleCol` for `createFormatter`, while other things (like `CopySelection`) used the `displayCol`. For references, the display column has type Any and doesn't know about the original formatting. This resulted in formatting being lost when copying from reference columns even though formatting was preserved when copying from the original (visible) column which looked identical. This diff fixes this and ensures that `createFormatter` is always used with the `visibleCol`. This was agreed on in https://grist.slack.com/archives/C0234CPPXPA/p1639571321043000
Additionally:
- Replaces the functions `createVisibleColFormatter` computed properties `visibleColFormatter` as suggested by a `TODO`.
- Extracts common code from `createVisibleColFormatter` in `ColumnRec` and `ViewFieldRec`
Test Plan: Fixed a test in CopyPaste which displayed the previous inconsistent behaviour.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3189
Summary:
* Tie build and run-time docker base images to a consistent version (buster)
* Extend the test login system activated by GRIST_TEST_LOGIN to ease porting tests that currently rely on cognito (many)
* Make org resets work in absence of billing endpoints
* When in-memory session caches are used, add missing invalidation steps
* Pass org information through sign-ups/sign-ins more carefully
* For CORS, explicitly trust GRIST_HOST origin when set
* Move some fixtures and tests to core, focussing on tests that cover existing failures or are in the set of tests run on deployments
* Retain regular `test` target to run the test suite directly, without docker
* Add a `test:smoke` target to run a single simple test without `GRIST_TEST_LOGIN` activated
* Add a `test:docker` target to run the tests against a grist-core docker image - since tests rely on certain fixture teams/docs, added `TEST_SUPPORT_API_KEY` and `TEST_ADD_SAMPLES` flags to ease porting
The tests ported were `nbrowser` tests: `ActionLog.ts` (the first test I tend to port to anything, out of habit), `Fork.ts` (exercises a lot of doc creation paths), `HomeIntro.ts` (a lot of DocMenu exercise), and `DuplicateDocument.ts` (covers a feature known to be failing prior to this diff, the CORS tweak resolves it).
Test Plan: Manually tested via `buildtools/build_core.sh`. In follow up, I want to add running the `test:docker` target in grist-core's workflows. In jenkins, only the smoke test is run. There'd be an argument for running all tests, but they include particularly slow tests, and are duplicates of tests already run (in different configuration admittedly), so I'd like to try first just using them in grist-core to gate updates to any packaged version of Grist (the docker image currently).
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3176
Summary:
Following discussion in https://phab.getgrist.com/D3164:
- Change createParser to accept docData and one or two metadata row IDs and let it extract the metadata, so it's more easily usable in the server.
- Change ViewFieldRec.valueParser observable to a function createValueParser.
Test Plan: Existing tests.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3172
Summary:
Add more method overrides to MetaTableData for extra type safety.
Use MetaTableData, MetaRowRecord, and getMetaTable in more places.
Test Plan: Mostly it just has to compile. Tested manually that types are being checked more strictly now, e.g. by adding a typo to property names. Some type casting has also been removed.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3168
Summary: Refactoring in preparation for parsing strings from the API. The plan is that the API code will only need to do a server-side version of the code in ViewFieldRec.valueParser (minus ReferenceUtils) which is quite minimal.
Test Plan: Nothing extra here, I don't think it's needed. This stuff will get tested more in a future diff which changes the API.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3164
Summary:
Exposing custom widgets as a dropdown menu in custom section configuration panel.
Adding new environmental variable GRIST_WIDGET_LIST_URL that points to a
json file with an array of available widgets. When not present, custom widget menu is
hidden, exposing only Custom URL option.
Available widget list can be fetched from:
https://github.com/gristlabs/grist-widget/releases/download/latest/manifest.json
Test Plan: New tests, and updated old ones.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3127
Summary:
Removed some TS and python code interacting with this meta table. Not touching schema or migrations.
This is not really necessary, just checking my understanding and cleaning up in preparation for raw data views. I can also remove _grist_TabItems code while I'm at it.
Test Plan: this
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3161
Summary:
Existing filters are now moved out of fields
and into a new metadata table for filters, and the
client is updated to retrieve/update/save filters from
the new table. This enables storing of filters for
columns that don't have fields (notably, hidden columns).
Test Plan: Browser and server tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3138
Summary:
The 'Open Access Rules' link is now hidden unless the
UserManager is opened inside a document, and the resource
that users are being managed for is a document.
Test Plan: Browser tests.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3142
Summary:
Added a new object type code `l` (for lookup) which can be used in user actions as a temporary cell value in ref[list] columns and is immediately converted to a row ID in the data engine. The value contains the original raw string (to be used as alt text), the column ID to lookup (typically the visible column) and one or more values to lookup.
For reflists, valueParser now tries parsing the string first as JSON, then as a CSV row, and applies the visible column parsed to each item.
Both ref and reflists columns no longer format the parsed value when there's no matching reference, the original unparsed string is used as alttext instead.
Test Plan: Added another table "Multi-References" to CopyPaste test. Made that table and the References table test with and without table data loaded in the browser.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3118
Summary:
Adds links to manage team and go to billing account in
the org menu (opened by clicking the dropdown in the
top-left corner of Grist). Tweaks some wording of items
in both AppHeader and AccountWidget, and adds a link
to create a new team site to the Site Switcher in both
menus.
Also tweaks the UI of UserManager by adding
an animation when the manager is opened from the
doc access dialog.
Test Plan: Browser tests.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3121
Summary:
Adding sort options for columns.
- Sort menu has a new option "More sort options" that opens up Sort left menu
- Each sort entry has an additional menu with 3 options
-- Order by choice index (for the Choice column, orders by choice position)
-- Empty last (puts empty values last in ascending order, first in descending order)
-- Natural sort (for Text column, compares strings with numbers as numbers)
Updated also CSV/Excel export and api sorting.
Most of the changes in this diff is a sort expression refactoring. Pulling out all the methods
that works on sortExpression array into a single namespace.
Test Plan: Browser tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: dsagal, alexmojaki
Differential Revision: https://phab.getgrist.com/D3077
Summary: Handle reflist columns in ViewFieldRec.parseValue
Test Plan: Reused section of test of reference columns
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3105
Summary:
Handle reference columns in ViewFieldRec.valueParser.
Extracted code for reuse from ReferenceEditor to look up values in the visible column. While I was at it, also extracted a bit of common code from ReferenceEditor and ReferenceListEditor into a new class ReferenceUtils. More refactoring could be done in this area but it's out of scope.
Changed NTextEditor to use field.valueParser, which affects numeric and reference fields. In particular this means numbers are parsed on data entry, it doesn't change anything for references.
Test Plan:
Added more CopyPaste testing to test references.
Tested entering slightly formatted numbers in NumberFormatting.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3094
Summary:
This gives more guidance to users when editing document shares in the UserManager dialog.
* For a document on a team site, any shares with team members are marked `Team member`.
* Shares that count as external collaborators are marked for documents on a team or personal site as `collaborator` (personal site) or `outside collaborator` (team site).
* Collaborators are marked `1 of 2`, `2 of 2`, and then `limit exceeded`.
* On a team site, links are offered for each collaborator to add them to the team. The links lead to a prefilled dialog for managing team membership which can be confirmed immediately, allowing the user to continue without interruption.
* On a personal site, for the last collaborator and beyond, a link is added for creating a team. This isn't seamless since creating a team involves billing etc.
There's a small unrelated tweak in tests to remove a confusing import from `test/browser` in `test/server`.
One thing I didn't get to is checking if owner of doc is owner of site. If they aren't, they may try to add a member and be denied at that point - it would be more polite to change messaging earlier for them.
Test Plan: added and updated tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3083
Summary:
Add ValueParser file, base class, and subclasses for column types. Only NumericParser is used for now.
Add valueParser field to ViewFieldRec.
Use valueParser when parsing pasted text data in Grid and Detail views.
Test Plan: Add test to nbrowser CopyPaste suite, copying into a numeric column with different currency and locale settings.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3082
Summary:
New plan signups now include a discount code field in
the signup form. If a valid discount code is entered, a
discount will be applied on the confirmation page.
Test Plan: Browser and server tests.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3076
Summary: Makes type checking a bit stronger
Test Plan: it just has to compile
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3065
Summary:
Removing error styles from user messages. Only unexpected errors are styled with red icon and border.
Removing reportSuccess message - leaving it for another diff.
Test Plan: manual tests
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3063
Summary:
Allowing a user to change labels' in Choice/ChoiceList entry editor. For updated
entries, renaming those values in all cells in the column.
Test Plan: Updated tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3057
Summary:
After an incomplete import, any GristHidden_* tables will show up in the page
list, but may not be removable if there is only one non-hidden table remaining.
Such tables should still be removable in this case.
Test Plan: Added a test case
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3058
Summary:
Styling toast notification. Adding colors and icons.
In Grist, changed the default style for errors (will be shown in red), and a style for
Linked copied to clipboard (will be shown in Green).
All other colors are not used currently, left for another diff.
Test Plan: manual
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3053
Summary:
Traceback is available on the Creator Panel in the formula editor. It is evaluated the same way as for normal formulas.
In case when the traceback is not available, only the error name is displayed with information that traceback is not available.
Cell with an error, when edited, shows the previous valid value that was used before the error happened (or None for new rows).
Value is stored inside the RaisedException object that is stored in a cell.
Test Plan: Created tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki, dsagal
Differential Revision: https://phab.getgrist.com/D3033
Summary: This tests site deletion with and without a plan.
Test Plan: adding tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3017
Summary: We still show up to 5 on regular-width screens.
Test Plan: Browser tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3008
Summary:
Allows selecting by a reflist in another table. This generalises cursor-linking with a ref column, but now it's filter linking.
Added another case to LinkingState where the source column is a reflist to the target table, filtering by the id column.
Updated convertQueryFromRefs and related functions to handle this since the id column has no column ref. In this case the string 'id' is used instead of a number.
LinkingState also checks if the source value is a reflist and uses that as the list of filter values instead of a single-element list of the cell value.
Indirect linking also works, where the source and target columns both are both references to the same table. This was the plan for a source reflist and target ref column.
I was surprised to see it also works perfectly when both columns are reflists, and it filters rows where there's an intersection!
Adding rows to the target section using the selected source record for default values is iffy. When filtering by row ID, there's no column for defaults, so the new row disappears.
For a source reflist and target ref, the first value of the reflist is the default, which is okayish. When both are reflists, the full source reflist is the default for the target column.
This seems like a bit much but just using the first value seems a bit arbitrary when there's room for all of them?
While doing all this I noticed an unrelated bug which I fixed as I was refactoring. Previously cursor linking based on a reference column did not update the cursor in the link target
when the value of the selected reference cell changed. Now cursor linking uses a floating row model like most other cases to observe the value correctly.
Test Plan: Extended SelectByRefList test and fixture, added previously failing test to RightPanelSelectBy.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3004
Summary: It is important for linking to be maintained, or user could be gravely misled about material in other sections.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3003
Summary:
- Filters out hidden pages from docModel.allPagesList (used for knowing default page, and for search iteration).
- Filters out hidden pages from TreeModel (uses raw tableData, so has a different way to filter).
Test Plan: WIP
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D2996
Summary:
- Grist document has a associated "locale" setting that affects how currency is formatted.
- Currency selector for number format.
Test Plan: not done
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D2977
Summary: Converted LinkingState from constructor function to class.
Test Plan: no
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2997
Summary:
This adds an `updateDomain` billing task that allows editing
the subdomain (and the org name, which is also editable with
the address).
A warning is shown that changing the subdomain will mean that
saved links need updating.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2988
Summary:
A new section, Other Sites, will now be shown on the All Documents page when:
- A user is on a personal site and has access to other team sites.
- A user is on a public site with view access only.
In addition, a site switcher is now available by clicking
the site name in the top-left section of the UI next to the
Grist logo. It works much like the switcher in the Account
menu.
Test Plan: Browser tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2979
Summary:
Adds Reference List as a widget type.
Reference List is similar to Choice List: multiple references can be added
to each cell through a similar editor, and the individual references
will always reflect their current value from the referenced table.
Test Plan: Browser tests.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: paulfitz, jarek, alexmojaki, dsagal
Differential Revision: https://phab.getgrist.com/D2959
Summary:
Enables the options in the Add New menu when on the templates page
(p/templates).
Test Plan: Browser test.
Reviewers: paulfitz, alexmojaki
Reviewed By: paulfitz, alexmojaki
Subscribers: paulfitz, jarek, alexmojaki
Differential Revision: https://phab.getgrist.com/D2971
Summary:
Prefix keys of `LinkingState.filterColValues` with `_contains:` when the source column is a ChoiceList or ReferenceList.
This is parsed out to make a boolean `isContainsFilter` which is kept in each value of `QueryRefs.filterTuples` (previously `filterPairs`).
Then when converting back in `convertQueryFromRefs` we construct `Query.contains: {[colId: string]: boolean}`.
Finally `getFilterFunc` uses `Query.contains` to decide what kind of filtering to do.
This is not pretty, but the existing code is already very complex and it was hard to find something that wouldn't require touching loads of code just to make things compile.
Test Plan: Added a new nbrowser test and fixture, tests that selecting a source table by summary tables grouped by a choicelist column, non-list column, and both all filter the correct data.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2940
Summary: Disabling "Add widget to page" on special pages like acl or code
Test Plan: browser tests
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2969
Summary: Importing from google drive from home screen (also for anonymous users)
Test Plan: Browser tests
Reviewers: dsagal, paulfitz
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2943
Summary:
The old Examples and Templates workspace is now
a page that pulls templates from a new public Grist Templates org.
The All Documents view will pull featured templates from that org, where
featured templates are simply pinned documents in Grist Templates. The
Examples and Templates page will also show the featured templates, as
well as the rest of the available templates organized by category. The
categories are equivalent to workspaces in Grist Templates, and are
generated dynamically.
Test Plan: Browser tests.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz, dsagal
Subscribers: dsagal, paulfitz, jarek
Differential Revision: https://phab.getgrist.com/D2930
Summary:
Like the welcome tour, a special URL hash triggers startDocTour which uses data from a table GristDocTour to construct the appropriate popups.
This is the basic version described in https://grist.quip.com/sN2RAHI2dchm/Document-tours
Test Plan:
Added a new nbrowser test which tests the data produced by makeDocTour. The general behaviour of the UI and popups has hardly changed so existing tests cover that well enough.
The new test uses a new fixture document which you can open to easily experience the tour.
Error cases where there's no valid document tour are not tested because that behaviour is likely to change significantly and this feature is still quite 'private'.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: jarek, dsagal
Differential Revision: https://phab.getgrist.com/D2938
Summary:
This makes it possible to set the type of a column to ReferenceList, but the UI is terrible
ReferenceList.ts is a mishmash of ChoiceList and Reference that sort of works but something about the CSS is clearly broken
ReferenceListEditor is just a text editor, you have to type in a JSON array of row IDs. Ignore the value that's present when you start editing. I can maybe try mashing together ReferenceEditor and ChoiceListEditor but it doesn't seem wise.
I think @georgegevoian should take over here. Reviewing the diff as it is to check for obvious issues is probably good but I don't think it's worth trying to land/merge anything.
Test Plan: none
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D2914
Summary: Remove repl.py, REPLTab.js, some wiring code, CSS, and a test in testscript.json.
Test Plan: NA
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2923
Summary:
- Fix flaky SamplesWS test, which was occasionally clicking a disabled button
- Increase timeout on backupSqliteDatabase test, which sometimes times out
- Fix a little flakiness in ExportSection test.
- Fix flaky Billing test by adjusting behavior slightly.
In Billing, when re-fetching subscription (e.g. on navigating back), we now
unset it while the fetch is pending, so that billing pages show a spinner or
"Fetching..." messages. This also gives tests something to wait for.
Also adjusts Billing styles on the "Fetching..." messages to make them look
different from regular text.
Test Plan: Mainly making exising tests more robust. Billing changes exercised by existing tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2920
Summary:
This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first.
This diff also brings few changes to onboarding module.
- allow to refer to element with selector
- usually dynamic selection of element sounds useful for when the
element does not exist yet when the tour starts. But the actual
reason when add it here, is to allow selecting the first cell.
- if the selector yields undefined (missing element), the popup
is simply skipped
- got rid of the internal registry to link between popup contents
and popup options. All is now define in the same interface. Registry
overall felt overkill and not needed.
- adds an option to show message as a simple modal that is centered
on the screen
This diff also brings the new welcome tour and hide it behind a flag
CAVEATS that need to be addressed in follow up commit:
- The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again.
- For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour.
- On boarding tours were not designed with mobile support in mind. So probably a good idea to disable.
- Backend support needs to be done (persistence of first time user).
Test Plan:
Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour`
To launch the tour:
- open any document
- open manually the right panel and the field tab
- append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2917
Summary:
This suspends service to a team site for which an AppSumo refund has been made, and nudges users to their free personal account.
I expect that a refund request would fail for a site where user is also paying us for extra seats.
Test Plan: tested manually
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2912
Summary:
This adds a new landing page for cognito sign-up, intended for
use by new appsumo users.
Their email address is pre-filled and locked down, and sign-up
is by entering a password.
The page is very crude compared to hosted cognito - especially
in error reporting! - but having the address filled in more
than makes up for that.
The flow does not quite connect with the new billing signup.
I think we can do that through the regular "welcome" process,
which will list the user's team site. When the user visits
that site, we could detect that we are on a site with no
domain set yet and for which the user is a billing manager,
and trigger a visit to the appropriate billing page.
Test Plan: manual - hard to test through cognito email step
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2880
Summary:
This links AppSumo sign-ups with Stripe subscriptions
and our billing pages. Different AppSumo tiers are supported by
different coupons on the standard plan. Configuration of this
is in stripe, and then cached in the database.
The front end is tweaked just enough to make completing a sign-up
possible. It is not yet friendly.
Not covered includes:
* Streamlining landing page.
* Making billing pages git clearer summaries of AppSumo states.
* Making flow through Cognito as graceful as possible - default
probably doesn't meet AppSumo requirements.
* Disabling site on cancellation/refund.
* Downgrades when more seats in use than lower tier allows.
Test Plan: api-level tests added. No front-end tests yet.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2878
Summary:
Makes filter counts take other column filters into account.
- Changes the summaries rows to reflect hidden rows:
- hidden rows are added to the `Other Values` summary
- show the unique number of other values as `Other Values (12)`
- Also, adds a sort button to the column filter menu
Test Plan: Adds browser test.
Reviewers: paulfitz, jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D2861
Summary:
User can freeze any number of columns, which will not move when a user scrolls grid horizontally.
Main use cases:
- Frozen columns don't move when a user scrolls horizontally
- The number of frozen columns is automatically persisted
- Readonly viewers see frozen columns and can modify them - but the change is not persisted
- On a small screen - frozen columns still moves to the left when scrolled, to reveal at least one column
- There is a single menu option - Toggle freeze - which offers the best action considering selected columns
- When a user clicks a single column - action to freeze/unfreeze is always there
- When a user clicks multiple columns - action is offered only where it makes sens (columns are near the frozen border)
Test Plan: Browser tests
Reviewers: dsagal, paulfitz
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2852
Test Plan: Wrote unit and browser tests that verify new behavior.
Reviewers: paulfitz, dsagal
Reviewed By: dsagal
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D2855
Summary:
- this is a core search code refactoring
- this diff should fix the js error that was happening when searching across pages.
Test Plan: Tested manually on dev's environment. Tests shows no regression and successfully fixes the js error.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2837
Summary: Cells will remember their previous state when user pressed the escape key. Grist will offer a way to continue with the draft, by showing notification and a tooltip above the editor.
Test Plan: Browser tests were created
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2822
Summary:
We used tslint earlier, and on switching to eslint, some rules were not
transfered. This moves more rules over, for consistent conventions or helpful
warnings.
- Name private members with a leading underscore.
- Prefer interface over a type alias.
- Use consistent spacing around ':' in type annotations.
- Use consistent spacing around braces of code blocks.
- Use semicolons consistently at the ends of statements.
- Use braces around even one-liner blocks, like conditionals and loops.
- Warn about shadowed variables.
Test Plan: Fixed all new warnings. Should be no behavior changes in code.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2831
Summary:
This diff implements the search improvement that are mentioned here https://grist.quip.com/j1biAmfGkbzV/Search-Improvements.
CAVEATS:
I've noticed a bit of a usability caveats: the tooltips overlap with the new `search all pages` checkbox, which requires user to move cursor away for a bit in order to be able to click the button.
{F28224}
I've experimented locally with tooltips showing on both sides of the arrows, but it overlaps with the cross icon so could also be an issue. I couldn't think of any clear simple alternative, probably not too big of an issue anyway.
Test Plan: Added new test.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2818
Summary:
When scrolling quicly through a column with hyperlinks, null could be passed to
a function that didn't expect it. Added better types would help catch it.
Test Plan: Tested manually
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2813
Summary:
- Update rules to be more like we've had with tslint
- Switch tsserver plugin to eslint (tsserver makes for a much faster way to lint in editors)
- Apply suggested auto-fixes
- Fix all lint errors and warnings in core/, app/, test/
Test Plan: Some behavior may change subtly (e.g. added missing awaits), relying on existing tests to catch problems.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2785
Summary:
- Cache the count by column, factoring out ColumnCache from
ColumnACIndexes, which uses a similar pattern.
- Update error counts in response to column selection and to data changes.
Test Plan: Adds a test case for the new message
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2780
Summary:
Fix an error that used to happen on Chrome: `RangeError: Maximum call stack size
exceeded`. Happened when clicking the `Other Values` checkbox when
filtering a large table. Turns out culprit was a function call that
was using a spread operator to pass a large number of argument to a
function.
Spread operator for passing multiple argument must not be used with
too many arguments. Otherwise it could hit the engine's argument
length limit. That limit varies across browser (webkit's
javascriptcore engine has argument limit of 65536).
Some interesting description of the limit can be found here:
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Function/apply#using_apply_and_built-in_functions
In order to get the fix fast, implementing a proper test for it is left for a follow-up commit.
Test Plan:
- Manually tested on Chrome/FF
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D2779
Summary:
- add new filterBar option to views section
- add toggle to the section menu
- add filter bar
- shows Save/Revert btn when unsaved change
- shows all filered fields witch edit and delete buttons
Test Plan: Add new FilterBar nbrowser test
Reviewers: paulfitz, dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2769
Summary:
- Allows ColumnFilter to add/delete keys by batch
- Add options limitShown to ColumnFilterMenu
- Add summary checkboxes Other Matching/Other Non-Matching/Other Values
- Adds missing type to chai declaration
Test Plan:
- Adds project test to new file projects/ColumnFilterMenu2
- Adds nbrowser test to new file nbrowser/ColumnFilterMenu
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2763
Summary:
- When Public Edit access is enabled, Access Rules page shows a warning and
prevents saving rules.
- When any ACL rules are present, attempts to set Public access to Editor role
get downgraded to Viewer role, with a warning notification.
- No checks are made on the server side, so the combination may be achieved via
the API (but we may block it in the future).
Test Plan: Added a test case.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2767
Summary:
This allows `*SPECIAL:AccessRules` to give read access to the access rules to more users, and `*SPECIAL:FullCopies` to grant download/copy rights to more users.
This diff also changes forks to be owned by the user who forked them (previously they were an editor), since that feels more natural.
Test Plan: Added and updated tests.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2760
Summary:
- Update styling of label, id, and "derived ID from label" checkbox.
- Implement a label which shows 'Data Column' vs 'Formula Column' vs 'Empty Column',
and a dropdown with column actions (such as Clear/Convert)
- Implement new formula display in the side-panel, and open the standard
FormulaEditor when clicked.
- Remove old FieldConfigTab, of which now very little would be used.
- Fix up remaining code that relied on it (RefSelect)
Test Plan: Fixed old tests, added new browser cases, and a case for a new helper function.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2757
Summary:
- Makes search input alway visible
- Gives search input focus on open
- Adds `Future Values` Checkbox
- Show `All Shown` `All Excpet` when values are filtered
- Show `Others` instead of `Future Values` when values are filtered
- Escape close search input
- Enter does the same as `All Shown` when filtering values
Test Plan:
- Updated existing projects and nbrowser test
- Adds new projects test
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2753
Summary:
- Switch code that compares user strings to use localeCompare() based on Intl.Collator.
- Use en-US locale for now. (Ideally should be a document property.)
- Note that with this change, sorting is also becoming case-insensitive (which
seems an improvement)
- Updated a sorted test fixture
- Updated a browser test with lots of unicode to expect different order.
- Added a bit of unicode to test ordering in Reference autocomplete dropdown.
Test Plan: Fixed / updated tests
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2758
Summary:
- No longer convert data columns to formula by typing a leading "=". Instead,
show a tooltip with a link to click if the conversion was intended.
- No longer convert a formula column to data by deleting its formula. Leave the
column empty instead.
- Offer the option "Convert formula to data" in column menu for formulas.
- Offer the option to "Clear column"
- If a subset of rows is shown, offer "Clear values" and "Clear entire column".
- Add logic to detect when a view shows a subset of all rows.
- Factor out showTooltip() from showTransientTooltip().
- Add a bunch of test cases to cover various combinations (there are small
variations in options depending on whether all rows are shown, on whether
multiple columns are selected, and whether columns include data columns).
Test Plan: Added a bunch of test cases.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2746
Summary:
- Fix transparency support on color select
- Fix z-index conflicts with color select and right panel
- Makes widget's default text color visible to color select
Test Plan: - Updates nbrowser/CellColor and browser/Widget.test to support new interface. Should not cause regression.
Reviewers: paulfitz, dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2735
Summary:
- Support schema changes in the presence of non-trivial ACL rules.
- Fix update of `aclFormulaParsed` when updating formulas automatically after schema change.
- Filter private metadata in broadcasts, not just fetches. Censorship method is unchanged, just refactored.
- Allow only owners to change ACL rules.
- Force reloads if rules are changed.
- Track rule changes within bundle, for clarity during schema changes - tableId and colId changes create a muddle otherwise.
- Show or forbid pages dynamically depending on user's access to its sections. Logic unchanged, just no longer requires reload.
- Fix calculation of pre-existing rows touched by a bundle, in the presence of schema changes.
- Gray out acl page for non-owners.
Test Plan: added tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2734
Summary:
With this change, if a comment is added to an ACL formula, then that comment will be offered to the user if access is denied and that rule could potentially have granted access.
The code is factored so that when access is permitted, or when partially visible tables are being filtered, there is little overhead. Comments are gathered only when an explicit denial of access.
Test Plan: added tests, updated tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2730
Summary:
This updates the logic for skipping unchanged rows to take removed
rows into account.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2732
Summary:
. Makes cell color work well in comparison mode
. Do not apply cell color to the add new row
. Allow to change color for all widget (including changing color for the checkbox and the switch widget)
. Fix an issue that was setting color to black when opening the picker
. Do not apply color to invalid cell
Test Plan: . Added nbrowser/CellColor
Reviewers: paulfitz, dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2720
Summary:
- This replaces the message "Unexpected Error / Access Denied / Report a problem" with a
one-line "Blocked by access rules".
Test Plan: Only tested manually
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2712
Summary: The list of users allows copying users' emails to clipboard, and viewing the doc as that user.
Test Plan: Added a basic test case
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2711
Summary:
This adds back-end support for query parameters `aclAsUser_` and
`aclAsUserId_` which, when either is present, direct Grist to
process granular access control rules from the point of view
of that user (specified by email or id respectively).
Some front end support is added, in the form of a tag that
shows up when in this mode, and a way to cancel the mode.
No friendly way to initiate the mode is offered yet.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2704
Summary:
- Placed rule-updating functions in acl.py.
- Reset UI when rules update externally, or alert the user to reset if there
are pending local changes.
- Removed some unused and distracting bits from client-side DocModel.
A few improvements related to poor error handling:
- In case of missing DocActions (tickled by broken ACL rule handling), don't
add to confusion by attempting to process bad actions
- In case of missing attributes in ACL formulas, return undefined rather than
fail; the latter creates more problems.
- In case in invalid rules, fail rather than skip; this feels more correct now
that we have error checking and recovery option, and helps avoid invalid rules.
- Prevent saving invalid rules with an empty ACL formula.
- Fix bug with rule positions.
Test Plan: Added a python and browser test for table/column renames.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2698
Summary:
- Add headers to tables.
- Change styles to reduce boxes-within-boxes.
- Add validation of table and column IDs, both in UI and on server when saving rules.
- Add autocomplete for tables/columns used for UserAttribute rules.
- Add a fancy widget to set permission bits.
Test Plan: Updated browser test for new UI, added a test case for user attributes.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2695
Summary:
- Fix error-handling in bundleActions(), and wait for the full bundle to complete.
(The omissions here were making it impossibly to react to errors from inside bundleActions())
- Catch problematic rules early enough to undo them, by trying out ruleCollection.update()
on updated rules before the updates are applied.
- Added checkAclFormula() call to DocComm that checks parsing and compiling
formula, and reports errors.
- In UI, prevent saving if any aclFormulas are invalid, or while waiting for the to get checked.
- Also fixed some lint errors
Test Plan: Added a test case of error reporting in ACL formulas.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2689
Summary:
Adds an "enter safe mode" option and explanation in modal that appears when a document fails to load, if user is owner. If "enter safe mode" is selected, document is reloaded on server in a special mode. Currently, the only difference is that if the acl rules fail to load, they are replaced with a fallback that grants full access to owners and no access to anyone else. An extra tag is shown to mark the document as safe mode, with an "x" for cancelling safe mode.
There are other ways a document could fail to load than just acl rules, so this is just a start.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2686
Summary:
This adds any parameters in a document url whose key ends in '_'
into a `user.Link` object available in access control formulas
and in setting up characteristic tables.
This allows, for example, sending links to a document that contain
a hard-to-guess token, and having that link grant access to a
controlled part of the document (invoices for a specific customer
for example).
A `user.Origin` field is also added, set during rest api calls,
but is only tested manually at this point. It could be elaborated
for embedding use-cases.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2680
Summary:
- Factored out ACLRuleCollection into its own file, and use for building UI.
- Moved AccessRules out of UserManager to a page linked from left panel.
- Changed default RulePart to be the last part of a rule for simpler code.
- Implemented much of the UI for adding/deleting rules.
- For now, editing the ACLFormula and Permissions is done using text inputs.
- Implemented saving rules by syncing a bundle of them.
- Fixed DocData to clean up action bundle in case of an early error.
Test Plan: WIP planning to add some new browser tests for the UI
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2678
Summary:
No behavior changes.
Diff includes an intermediate commit with only renames, for easier review.
Test Plan: Existing tests should pass.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2669
Summary:
- Remove modules related to old login / profile that we don't plan to bring back.
- Remove old unused DocListModel.
- Remove ext* tests that have been skipped and don't work.
- Remove old ModalDialog, and switch its one remaining usage to the newer way.
Test Plan: All tests should pass, and as many as before.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2668
Summary:
It can be hard to find changes, even when highlighted, in a table with many rows. This diff replaces long sequences of unchanged rows with a row containing "..."s.
With daff, I found that it is important to do this for sequences of unchanged columns also, but not tackling that yet.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2666
Summary:
This makes data diff rendering robust to changes in the names of tables.
It does not yet show information about those changes, but at least it
won't fail to show table content changes.
Added a missing case to ActionSummary concatenation that came up in
testing.
Test Plan: added test, updated test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2661
Summary:
This makes a small tweak to show cell and row changes in card views
and card list views, and adds a test for it.
Test Plan: added tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2660
Summary:
With recent changes to action history, we can now remove the temporary
`finalRowContent` field from change details, since all the information
we need is now in the ActionSummary.
We also now have more information about the state of the common ancestor,
which previously we could not get either from ActionSummary or from
`finalRowContent`. We take advantage of that to flesh out rendering
differences where there are some changes locally and some changes
remotely.
There's still a lot more to do, this is just one step.
I have added a link to the UI for viewing the comparison. I wouldn't
want to advertise that link until diffs are robust to name changes.
Test Plan: added test, updated tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2658
Summary:
Type conversions and formula tranforms wait for the user and bundle multiple
actions. When an unrelated action is done (e.g. adding a page widget or a
column), we want to finalize the transform before applying it.
The approach turns out fairly complicated. There is an implicit queue of
bundles (which we don't let grow beyond 2, as that's too abnormal). Bundles may
be finalized by a user clicking something, or by an unrelated action/bundle, or
(as before) by transform DOM getting disposed.
- Updated RecordLayout to use bundleActions() helper
- Added support for nesting bundleActions inside another bundle (needed for
setting visibleCol during type change)
- In an unrelated tweak, when in debug-log in ActiveDoc, use a short representation of result.
Test Plan: Added a unittest for action bundling during type transform
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2655
