Summary:
Skipping columns during incremental imports wasn't working for certain
column types, such as numeric columns. The column's default value was
being used instead (e.g. 0), overwriting values in the destination
table.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3402
Summary: Adds a special user action `UpdateCurrentTime` which invalidates an internal engine dependency node that doesn't belong to any table but is 'used' by the `NOW()` function. Applies the action automatically every hour.
Test Plan: Added a Python test for the user action. Tested the interval periodically applying the action manually: {F43312}
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3389
Summary: Allow exceeding the daily API usage limit for a doc based on additional allocations for the current hour and minute. See the doc comment on getDocApiUsageKeysToIncr for details. This means that up to 5 redis keys may be relevant at a time for a single document.
Test Plan: Updated and expanded 'Daily API Limit' tests.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3368
Summary:
Currently, Grist behind a reverse proxy will generate many
needless redirects via `http`, and can't be used with only
port 443. This diff centralizes generation of these redirects
and uses the protocol in APP_HOME_URL if it is set.
Test Plan:
manually tested by rebuilding grist-core and
doing a reverse proxy deployment that had no support for
port 80. Prior to this change, there are lots of problems;
after, the site works as expected.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3400
Summary:
A new way for renaming tables.
- There is a new popup to rename section (where you can also rename the table)
- Renaming/Deleting page doesn't modify/delete the table.
- Renaming table can rename a page if the names match (and the page contains a section with that table).
- User can rename table in Raw Data UI in two ways - either on the listing or by using the section name popup
- As before, there is no way to change tableId - it is derived from a table name.
- When the section name is empty the table name is shown instead.
- White space for section name is allowed (to discuss) - so the user can just paste ' '.
- Empty name for a page is not allowed (but white space is).
- Some bugs related to deleting tables with attached summary tables (and with undoing this operation) were fixed (but not all of them yet).
Test Plan: Updated tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D3360
Summary:
Summary columns now have their own conditional rules,
which are not shared with sister columns.
Test Plan: New test
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3388
Summary:
- Previously showed "UnboundLocalError". Now will show:
Import failed: Failed to parse Excel file.
Error: No tables found (1 empty tables skipped)
- Also fix logging for import code
Test Plan: Added a test case
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3396
Summary: InitNewDoc is essentially only used to generate initialDocSql, so it doesn't make sense to set the timezone and locale. They are always set when actually creating a new doc anyway. Discussed in https://grist.slack.com/archives/C0234CPPXPA/p1650312714217089.
Test Plan: this
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3394
Summary:
This also enables the new Usage section for all sites. Currently,
it shows metrics for document row count, but only if the user
has full document read access. Otherwise, a message about
insufficient access is shown.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3377
Summary:
Call ActiveDoc.removeUnusedAttachments every hour using setInterval, and in ActiveDoc.shutdown (which also clears said interval).
Unrelated: small fix to my webhooks code which was creating a redis client on shutdown just to quit it.
Test Plan:
Tweaked DocApi test to remove expired attachments by force-reloading the doc, so that it removes them during shutdown. Extracted a new testing endpoint /verifyFiles to support this test (previously running that code only happened with `/removeUnused?verifyfiles=1`).
Tested the setInterval part manually.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3387
Summary: Mark actions adding attachment metadata as 'internal' (not part of undo stack) which previously was only for the Calculate action.
Test Plan: Extended nbrowser attachments test
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3380
Summary:
This avoids an extra database query to look up the user's current
name, by capturing it at the moment their user id is queried.
Test Plan: existing test for user.Name changes continues to pass
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3381
Summary:
- Add a new parameter `Features.baseMaxAttachmentsBytesPerDocument` and set it to 1GB for the free team product.
- Add a method to DocStorage to calculate the total size of existing and used attachments.
- Add a migration to DocStorage adding an index to make the query in the above method fast.
- Check in ActiveDoc if uploading attachment(s) would exceed the product limit on that document.
Test Plan: Added test in `limits.ts` testing enforcement of the attachment limit.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3374
Summary: The name of a user for actions made using a websocket until now could be inconsistent with that seen by other means. This draws the name from the database, rather than from session information that may have been cached from an identity provider.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3379
Summary: Adds methods to delete metadata rows based on timeDeleted. The flag expiredOnly determines if it only deletes attachments that were soft-deleted 7 days ago, or just all soft-deleted rows. Then any actual file data that doesn't have matching metadata is deleted.
Test Plan: DocApi test
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3364
Summary:
- Include docId when available for client-side error reporting
- Distinguish sandbox crashes from forced exits
Test Plan: Tested manually
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3373
Summary:
This also updates Authorizer to link the authSubject
to Grist users if not previously linked. Linked subjects
are now used as the username for password-based logins,
instead of emails, which remain as a fallback.
Test Plan: Existing tests, and tested login flows manually.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3356
Summary:
Builds on https://phab.getgrist.com/D3352
Add DocStorage.scanAttachmentsForUsageChanges to do fancy JSON query to find all attachment metadata rows whose soft deletion status needs updating.
Add ActiveDoc.updateUsedAttachments which uses the above and then applies the appropriate user action if needed to soft delete/undelete metadata rows.
Add endpoint in DocApi calling ActiveDoc method.
Test Plan: Added DocApi test
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3357
Summary: Adds a migration in preparation for future work on tracking and deleting attachments. This includes a `_grist_Attachments.timeDeleted` column which isn't used yet, and changing the storage format of user columns of type `Attachments`. DocStorage now treats Attachments like RefList in general (since they use JSON), which also prompted a tiny bit of refactoring.
Test Plan: Added a migration test case showing the change in format.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3352
Summary:
The logic for calculating redirects wasn't quite right for Grist
configured to use a single domain, with teams encoded in the path.
This fixes it.
Test Plan: tested manually with docker compose and /etc/hosts
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3359
Summary:
Based on a discussion in https://grist.quip.com/ZvttAyjLCI7H#eLVADAbyipu
Without this change, the only difference between Enterprise and Pro plans regarding snapshots is 5 extra snapshots, one per year.
Test Plan: none
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3349
Summary:
This fleshes out header-based authentication a little more to
work with traefik-forward-auth.
Test Plan: manually tested
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3348
Summary:
Adds a new Grist login page to the login app, and replaces the
server-side Cognito Google Sign-In flow with Google's own OAuth flow.
Test Plan: Browser and server tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3332
Summary:
Track 'data size' in ActiveDoc alongside row count. Measure it at most once every 5 minutes after each change as before, or after every change when it becomes high enough to matter.
A document is now considered to be approaching/exceeding 'the data limit' if either the data size or the row count is approaching/exceeding its own limit.
Unrelated: tweaked teamFreeFeatures.snapshotWindow based on Quip comments
Test Plan: Tested manually that data size is now logged after every change once it gets high enough, but only if the row limit isn't also too high. Still too early for automated tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3341
Summary:
Builds upon https://phab.getgrist.com/D3328
- Add HomeDB column `Document.gracePeriodStart`
- When the row count moves above the limit, set it to the current date. When it moves below, set it to null.
- Add DataLimitStatus type indicating if the document is approaching the limit, is in a grace period, or is in delete only mode if the grace period started at least 14 days ago. Compute it in ActiveDoc and send it to client when opening.
- Only allow certain user actions when in delete-only mode.
Follow-up tasks related to this diff:
- When DataLimitStatus in the client is non-empty, show a banner to the appropriate users.
- Only send DataLimitStatus to users with the appropriate access. There's no risk landing this now since real users will only see null until free team sites are released.
- Update DataLimitStatus immediately in the client when it changes, e.g. when user actions are applied or the product is changed. Right now it's only sent when the document loads.
- Update row limit, grace period start, and data limit status in ActiveDoc when the product changes, i.e. the user upgrades/downgrades.
- Account for data size when computing data limit status, not just row counts.
See also the tasks mentioned in https://phab.getgrist.com/D3331
Test Plan: Extended FreeTeam nbrowser test, testing the 4 statuses.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3331
Summary:
This adds support for gvisor sandboxing in core. When Grist is run outside of a container, regular gvisor can be used (if on linux), and will run in rootless mode. When Grist is run inside a container, docker's default policy is insufficient for running gvisor, so a fork of gvisor is used that has less defence-in-depth but can run without privileges.
Sandboxing is automatically turned on in the Grist core container. It is not turned on automatically when built from source, since it is operating-system dependent.
This diff may break a complex method of testing Grist with gvisor on macs that I may have been the only person using. If anyone complains I'll find time on a mac to fix it :)
This diff includes a small "easter egg" to force document loads, primarily intended for developer use.
Test Plan: existing tests pass; checked that core and saas docker builds function
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3333
Summary:
This shuffles some server tests to make them available in grist-core,
and adds a test for the `GRIST_PROXY_AUTH_HEADER` feature added in
https://github.com/gristlabs/grist-core/pull/165
It includes a fix for a header normalization issue for websocket connections.
Test Plan: added test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3326
Summary:
Firstly I just wanted some more consistency and less repetition in places where Documents are retrieved from the DB, so it's more obvious when code differs from the norm. Main changes for that part:
- Let HomeDBManager accept a `Request` directly and convert it to a `Scope`, and use this in a few places.
- `getScope` tries `req.docAuth.docId` if `req.params` doesn't have a docId.
I also refactored how `_createActiveDoc` gets the document URL, separating out getting the document from getting a URL for it. This is because I want to use that document object in a future diff, but I also just find it cleaner. Notable changes for that:
- Extracted a new method `HomeDBManager.getRawDocById` as an alternative to `getDoc` that's explicitly for when you only have a document ID.
- Removed the interface method `GristServer.getDocUrl` and its two implementations because it wasn't used elsewhere and it didn't really add anything on top of getting a doc (now done by `getRawDocById`) and `getResourceUrl`.
- Between `cachedDoc` and `getRawDocById` (which represent previously existing code paths) also try `getDoc(getScope(docSession.req))`, which is new, because it seems better to only `getRawDocById` as a last resort.
Test Plan: Existing tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3328
Summary:
Adding conditional formatting rules feature.
Each column can have multiple styling rules which are applied in order
when evaluated to a truthy value.
- The creator panel has a new section: Cell Style
- New user action AddEmptyRule for adding an empty rule
- New columns in _grist_Table_columns and fields
A new color picker will be introduced in a follow-up diff (as it is also
used in choice/choice list/filters).
Design document:
https://grist.quip.com/FVzfAgoO5xOF/Conditional-Formatting-Implementation-Design
Test Plan: new tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3282
Summary: Capture the stacktrace (via SandboxError) in `_pyCallWait` instead of `_onSandboxMsg` where it's always the same.
Test Plan:
Tested manually, found for example that the stacktrace in the logs changed from being rather useless:
```
at NSandbox._onSandboxMsg (/home/alex/work/grist/_build/core/app/server/lib/NSandbox.js:229:36)
at /home/alex/work/grist/_build/core/app/server/lib/NSandbox.js:179:18
at Unmarshaller.parse (/home/alex/work/grist/_build/core/app/common/marshal.js:289:21)
at NSandbox._onSandboxData (/home/alex/work/grist/_build/core/app/server/lib/NSandbox.js:174:28)
at Socket.<anonymous> (/home/alex/work/grist/_build/core/app/server/lib/NSandbox.js:63:59)
at Socket.emit (events.js:315:20)
at Socket.EventEmitter.emit (domain.js:467:12)
at addChunk (internal/streams/readable.js:309:12)
at readableAddChunk (internal/streams/readable.js:284:9)
at Socket.Readable.push (internal/streams/readable.js:223:10)
at Pipe.onStreamRead (internal/stream_base_commons.js:188:23)
```
to being somewhat more helpful:
```
at NSandbox._pyCallWait (/home/alex/work/grist/_build/core/app/server/lib/NSandbox.js:134:19)
at processTicksAndRejections (internal/process/task_queues.js:93:5)
at async ActiveDoc.applyActionsToDataEngine (/home/alex/work/grist/_build/core/app/server/lib/ActiveDoc.js:1080:39)
at async Sharing._applyActionsToDataEngine (/home/alex/work/grist/_build/core/app/server/lib/Sharing.js:325:37)
```
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3329
Summary:
Keep track of the number of API requests made for this document today in redis. Uses local caches of the count and the document so that usually requests can proceed without waiting for redis or the database.
Moved the free standing function apiThrottle to become a method to avoid adding another layer of request handler callbacks.
Test Plan: Added a DocApi test
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3327
Summary:
- Add a method `getSnapshotWindow` to `IInventory` and `DocSnapshotInventory`. It returns a `SnapshotWindow`, which represents a duration of time for which we keep backups for a particular document.
- `DocSnapshotPruner` calls this method and passes the window to `shouldKeepSnapshots` to determine which document versions have fallen outside the window and should be pruned.
- The implementation passed to `DocSnapshotInventory` uses a new method `getDocProduct` in `HomeDBManager` which directly returns the `Product` associated with a document, given only the document ID. Other methods in `HomeDBManager` require passing more information, especially about a user, but `DocSnapshotPruner` only knows about document IDs.
Test Plan: Added a test for `getDocProduct` and a test for `DocSnapshotPruner` where `getSnapshotWindow` is specified.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3322
Summary: This makes an equivalent of the /records REST endpoint available within custom widgets. For simple operations, it is compatible with https://github.com/airtable/airtable.js/. About half of the diff is refactoring code from DocApi that implements /records using applyUserActions, to make that code available in the plugin api.
Test Plan: added tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3320
Summary:
Add rowCount returned from sandbox when applying user actions to ActionGroup which is broadcast to clients.
Add rowCount to ActiveDoc and update it after applying user actions.
Add rowCount to OpenLocalDocResult using ActiveDoc value, to show when a client opens a doc before any user actions happen.
Add rowCount observable to DocPageModel which is set when the doc is opened and when action groups are received.
Add crude UI (commented out) in Tool.ts showing the row count and the limit in AppModel.currentFeatures. The actual UI doesn't have a place to go yet.
Followup tasks:
- Real, pretty UI
- Counts per table
- Keep count(s) secret from users with limited access?
- Data size indicator?
- Banner when close to or above limit
- Measure row counts outside of sandbox to avoid spoofing with formula
- Handle changes to the limit when the plan is changed or extra rows are purchased
Test Plan: Tested UI manually, including with free team site, opening a fresh doc, opening an initialised doc, adding rows, undoing, and changes from another tab. Automated tests seem like they should wait for a proper UI.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3318
Summary:
This calls sqlite3_limit(SQLITE_LIMIT_ATTACHED, 0) so that
if ever an `ATTACH` were snuck into an SQL query, it would be denied.
The limit needs to be waived when calling VACUUM since the implementation
of VACUUM uses ATTACH.
Test Plan: added test; existing tests should pass
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3316
Summary:
Adds Google Tag Manager snippet to all login pages, and a new user
preference, recordSignUpEvent, that's set to true on first sign-in. The
client now checks for this preference, and if true, dynamically loads
Google Tag Manager to record a sign-up event. Afterwards, it removes
the preference.
Test Plan: Tested manually.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3319
Summary:
If cancel was clicked while a transform section was still being
generated in the Importer, an error was thrown. This refactors
the cancelImportFiles API action to take in the file upload id
in place of the entire DataSourceTransformed parameter, which
contains other values that are irrelevant to canceling. One of those
values, the transform section id, was causing the error to be thrown
since it was momentarily null.
Test Plan: Tested manually.
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3317
Summary: As suggested by @dsagal in https://phab.getgrist.com/D3277#inline-36801, change to query `SUM(pgsize - unused)` instead of `SUM(pgsize)` to measure actual data size more accurately. Technically this doesn't reflect the database file size as accurately, but it should reflect sandbox memory usage better, and more importantly it should allow users to see data size decreasing when they delete stuff.
Test Plan: Tested manually by adding rows to a doc and looking at the logs. The data size is smaller and changes more granularly.
Reviewers: dsagal, paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3313
Summary:
Custom widget into page is served from a homeUrl instead
of untrusted URL, which might be not used in grist-core.
Test Plan: manual test
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3307
Summary:
Importing a .grist document is implemented in a somewhat clunky way, in a multi-worker setup.
* First a random worker receives the upload, and updates Grist's various stores appropriately (database, redis, s3).
* Then a random worker is assigned to serve the document.
If the worker serving the document fails, there is a chance the it will end up assigned to the worker that handled its upload. Currently the worker will misbehave in this case. This diff:
* Ports a multi-worker test from test/home to run in test/s3, and adds a test simulating a bad scenario seen in the wild.
* Fixes persistence of any existing document checksum in redis when a worker is assigned.
* Adds a check when assigned a document to serve, and finding that document already cached locally. It isn't safe to rely only on the document checksum in redis, since that may have expired.
* Explicitly claims the document on the uploading worker, so this situation becomes even less likely to arise.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3305
