Summary:
This makes many small changes so that Grist is less fussy to run as a single instance behind a reverse proxy. Some users had difficulty with the self-connections Grist would make, due to internal network setup, and since these are unnecessary in any case in this scenario, they are now optimized away. Likewise some users had difficulties related to doc worker urls, which are now also optimized away. With these changes, users should be able to get a lot further on first try, at least far enough to open and edit documents.
The `GRIST_SINGLE_ORG` setting was proving a bit confusing, since it appeared to only work when set to `docs`. This diff
adds a check for whether the specified org exists, and if not, it creates it. This still depends on having a user email to make as the owner of the team, so there could be remaining difficulties there.
Test Plan: tested manually with nginx
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3299
Summary:
Enabled by default, the new checkbox is only visible to
users logged in with email/password, and controls whether it is possible
to log in to the same account via a Google account
(with matching email). When disabled, CognitoClient will refuse logins
from Google if a Grist account with the same email exists.
Test Plan:
Server and browser tests for setting flag. Manual tests to verify
Cognito doesn't allow signing in with Google when flag is disabled.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3257
Summary:
Grist sessions created pre-MFA do not store access or
refresh tokens, which means that MFA status from Cognito
can't be loaded without requiring re-authentication. MFAConfig
handles this by requiring security verification as usual, and
checking if it needs to reload MFA status on success. If it does, it'll
close the 2FA setup dialog and reload, which should show the correct
2FA configuration status and buttons.
Test Plan: Updated existing tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3231
Summary:
Enables configuration of multi-factor authentication from the
account page (for users who sign in with email/password), and adds
SMS as an authentication method.
Test Plan: Project, browser and server tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3215
Summary:
The user profile dialog is now a separate page, in preparation
for upcoming work to enable MFA. This commit also contains
some MFA changes, but the UI is currently disabled and the
implementation is limited to software tokens (TOTP) only.
Test Plan:
Updated browser tests for new profile page. Tests for MFAConfig
and CognitoClient will be added in a later diff, once the UI is enabled.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3199
Summary:
Exposing custom widgets as a dropdown menu in custom section configuration panel.
Adding new environmental variable GRIST_WIDGET_LIST_URL that points to a
json file with an array of available widgets. When not present, custom widget menu is
hidden, exposing only Custom URL option.
Available widget list can be fetched from:
https://github.com/gristlabs/grist-widget/releases/download/latest/manifest.json
Test Plan: New tests, and updated old ones.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3127
Summary:
This gives more guidance to users when editing document shares in the UserManager dialog.
* For a document on a team site, any shares with team members are marked `Team member`.
* Shares that count as external collaborators are marked for documents on a team or personal site as `collaborator` (personal site) or `outside collaborator` (team site).
* Collaborators are marked `1 of 2`, `2 of 2`, and then `limit exceeded`.
* On a team site, links are offered for each collaborator to add them to the team. The links lead to a prefilled dialog for managing team membership which can be confirmed immediately, allowing the user to continue without interruption.
* On a personal site, for the last collaborator and beyond, a link is added for creating a team. This isn't seamless since creating a team involves billing etc.
There's a small unrelated tweak in tests to remove a confusing import from `test/browser` in `test/server`.
One thing I didn't get to is checking if owner of doc is owner of site. If they aren't, they may try to add a member and be denied at that point - it would be more polite to change messaging earlier for them.
Test Plan: added and updated tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3083
Summary:
This verifies that all existing tests are capable of running under python3/gvisor, and fixes the small issues that came up. It does not yet activate python3 tests on all diffs, only diffs that specifically request them.
* Adds a suffix in test names and output directories for tests run with PYTHON_VERSION=3, so that results of the same test run with and without the flag can be aggregated cleanly.
* Adds support for checkpointing to the gvisor sandbox adapter.
* Prepares a checkpoint made after grist python code has loaded in the gvisor sandbox.
* Changes how `DOC_URL` is passed to the sandbox, since it can no longer be passed in as an environment variable when using checkpoints.
* Uses the checkpoint to speed up tests using the gvisor sandbox, otherwise a lot of tests need more time (especially on mac under docker).
* Directs jenkins to run all tests with python2 and python3 when a new file `buildtools/changelogs/python.txt` is touched (this diff counts as touching that file).
* Tweaks miscellaneous tests
- some needed fixes exposed by slightly different timing
- a small number actually give different results in py3 (removal of `u` prefixes).
- some needed a little more time
The DOC_URL change is not the ultimate solution we want for DOC_URL. Eventually it should be a variable that gets updated, like the date perhaps. This is just a small pragmatic change to preserve existing behavior.
Tests are run mindlessly as py3, and for some tests it won't change anything (e.g. if they do not use NSandbox). Tests are not run in parallel, doubling overall test time.
Checkpoints could be useful in deployment, though this diff doesn't use them there.
The application of checkpoints doesn't check for other configuration like 3-versus-5-pipe that we don't actually use.
Python2 tests run using pynbox as always for now.
The diff got sufficiently bulky that I didn't tackle running py3 on "regular" diffs in it. My preference, given that most tests don't appear to stress the python side of things, would be to make a selection of the tests that do and a few wild cards, and run those tests on both pythons rather then all of them. For diffs making a significant python change, I'd propose touching buildtools/changelogs/python.txt for full tests. But this is a conversation in progress.
A total of 6886 tests ran on this diff.
Test Plan: this is a step in preparing tests for py3 transition
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3066
Summary:
This unsets the `direct` flag for actions emitted when summary tables are updated. That means those actions will be ignored for access control purposes. So if a user has the right to change a source table, the resulting changes to the summary won't result in the overall action bundle being forbidden.
I don't think I've actually seen the use case that inspired this issue being filed. I could imagine perhaps a user forbidden from creating rows globally making permitted updates that could add rows in a summary (and it being desirable to allow that).
Test Plan: added tests
Reviewers: jarek
Reviewed By: jarek
Subscribers: dsagal, alexmojaki, jarek
Differential Revision: https://phab.getgrist.com/D3022
Summary:
Moves CSV and XLSX export urls under /download/, and
removes the document title query parameter which is now
retrieved from the backend.
Test Plan: No new tests. Existing tests that verify endpoints still function.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3010
Summary:
The endpoints for exporting CSV and Excel are now under
/api/docs/:docId/ and are forwarded to a doc worker for export.
The Share Menu has been updated to use the new endpoints.
Test Plan: No new tests. Existing tests that verify endpoints work correctly.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3007
Summary:
Access endpoints were supposed to provide display versions of emails,
but in fact only the org endpoint was doing so. This brings the
workspaces and docs endpoints into line, and adds tests.
Full user information is tweaked slightly to return an anonymous
flag only when anonymous. This was already anticipated in the
FullUser type.
Test Plan: extended test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2999
Summary:
The old Examples and Templates workspace is now
a page that pulls templates from a new public Grist Templates org.
The All Documents view will pull featured templates from that org, where
featured templates are simply pinned documents in Grist Templates. The
Examples and Templates page will also show the featured templates, as
well as the rest of the available templates organized by category. The
categories are equivalent to workspaces in Grist Templates, and are
generated dynamically.
Test Plan: Browser tests.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz, dsagal
Subscribers: dsagal, paulfitz, jarek
Differential Revision: https://phab.getgrist.com/D2930
Summary:
Implementing export to excel and send to Google Drive feature.
As part of this feature few things were implemented:
- Server side google authentication exposed on url: (docs, docs-s, or localhost:8080)/auth/google
- Exporting grist documents as an excel file (xlsx)
- Storing exported grist document (in excel format) in Google Drive as a spreadsheet document.
Server side google authentication requires one new environmental variables
- GOOGLE_CLIENT_SECRET (required) used by authentication handler
Test Plan: Browser tests for exporting to excel.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2924
Summary:
Bundles some new document options into a JSON column.
The icon option is treated somewhat gingerly. It is intended, at
least initially, to store an image thumbnail for a document as a
url to hand-prepared assets (for examples and templates), so it is
locked down to a particular url prefix to avoid opening the door to
mischief.
Test Plan: added test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D2916
Summary:
Branding feedback from AppSumo found a capitalization problem. They also nudged us again to include a link back for the user to manage
their AppSumo account.
Test Plan: manual
Reviewers: dsagal, anaisconce
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D2901
Summary:
We used tslint earlier, and on switching to eslint, some rules were not
transfered. This moves more rules over, for consistent conventions or helpful
warnings.
- Name private members with a leading underscore.
- Prefer interface over a type alias.
- Use consistent spacing around ':' in type annotations.
- Use consistent spacing around braces of code blocks.
- Use semicolons consistently at the ends of statements.
- Use braces around even one-liner blocks, like conditionals and loops.
- Warn about shadowed variables.
Test Plan: Fixed all new warnings. Should be no behavior changes in code.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2831
Summary:
- Update rules to be more like we've had with tslint
- Switch tsserver plugin to eslint (tsserver makes for a much faster way to lint in editors)
- Apply suggested auto-fixes
- Fix all lint errors and warnings in core/, app/, test/
Test Plan: Some behavior may change subtly (e.g. added missing awaits), relying on existing tests to catch problems.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2785
Summary: The list of users allows copying users' emails to clipboard, and viewing the doc as that user.
Test Plan: Added a basic test case
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2711
Summary:
This adds a snapshots/remove and states/remove endpoint, primarily
for maintenance work rather than for the end user. If some secret
gets into document history, it is useful to be able to purge it
in an orderly way.
Test Plan: added tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2694
Summary:
Adds an "enter safe mode" option and explanation in modal that appears when a document fails to load, if user is owner. If "enter safe mode" is selected, document is reloaded on server in a special mode. Currently, the only difference is that if the acl rules fail to load, they are replaced with a fallback that grants full access to owners and no access to anyone else. An extra tag is shown to mark the document as safe mode, with an "x" for cancelling safe mode.
There are other ways a document could fail to load than just acl rules, so this is just a start.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2686
Summary:
This implements row-level access control for outgoing messages, replacing the document reloading placeholder that was there before.
* Prior to broadcasting messages, GranularAccess is notified of actions+undo.
* While broadcasting messages to different sessions, if we find we need row level access control information, rows before and after the change are reconstructed.
* Messages are rewritten if rows that were previously forbidden are now allowed, and vice versa.
The diff is somewhat under-tested and under-optimized. Next step would be to implement row-level access control for incoming actions, which may result in some rejiggering of the code from this diff to avoid duplication of effort under some conditions.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2670
Summary:
This is a prototype for expanding the conditions that can be used in granular ACLs.
When processing ACLs, the following variables (called "characteristics") are now available in conditions:
* UserID
* Email
* Name
* Access (owners, editors, viewers)
The set of variables can be expanded by adding a "characteristic" clause. This is a clause which specifies:
* A tableId
* The name of an existing characteristic
* A colId
The effect of the clause is to expand the available characteristics with all the columns in the table, with values taken from the record where there is a match between the specified characteristic and the specified column.
Existing clauses are generalized somewhat to demonstrate and test the use these variables. That isn't the main point of this diff though, and I propose to leave generalizing+systematizing those clauses for a future diff.
Issues I'm not dealing with here:
* How clauses combine. (The scope on GranularAccessRowClause is a hack to save me worrying about that yet).
* The full set of matching methods we'll allow.
* Refreshing row access in clients when the tables mentioned in characteristic tables change.
* Full CRUD permission control.
* Default rules (part of combination).
* Reporting errors in access rules.
That said, with this diff it is possible to e.g. assign a City to editors by their email address or name, and have only rows for those Cities be visible in their client. Ability to modify those rows, and remain updates about them, remains under incomplete control.
Test Plan: added tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2642
Summary:
* Fix old download endpoint to correctly pass org info in redirect.
* Switch to use newer download endpoint in client.
Old endpoint not removed. I started doing that, but it is used in copying, and it struck me that I'm not sure what should happen when copying from a site document to "Personal" - should it be the Personal that is associated with docs.getgrist.com currently, of should it be the Personal that is associated with the email of the user on whatever-site-we-are-on.getgrist.com. So leaving that as separate work.
Test Plan: updated tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2639
Summary:
For methods other than `GET`, `HEAD`, and `OPTIONS`, allow cookie-based authentication only if a certain custom header is present.
Specifically, we check that `X-Requested-With` is set to `XMLHttpRequest`. This is somewhat arbitrary, but allows us to use https://expressjs.com/en/api.html#req.xhr.
A request send from a browser that sets a custom header will prompt a preflight check, giving us a chance to check if the origin is trusted.
This diff deals with getting the header in place. There will be more work to do after this:
* Make sure that all important endpoints are checking origin. Skimming code, /api endpoint check origin, and some but not all others.
* Add tests spot-testing origin checks.
* Check on cases that authenticate differently.
- Check the websocket endpoint - it can be connected to from an arbitrary site; there is per-doc access control but probably better to lock it down more.
- There may be old endpoints that authenticate based on knowledge of a client id rather than cookies.
Test Plan: added a test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2631
Summary:
- The older "Anonymous access" option is renamed to "Public access" in the UI.
- This option was only present with GRIST_SUPPORT_ANON set.
- With GRIST_SUPPORT_ANON, the old behavior is kept: "Public access"
option adds/removes anon@ user
- Without GRIST_SUPPORT_ANON (normal case), orgs/workspaces don't support
"Public access" option. For documents, it adds/removes everyone@ user.
The latter is the main feature of interest. The GRIST_SUPPORT_ANON flag
is set for on-premise installs, and adds discoverability by anon users.
Test Plan: Added a test cases and checks in other tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2612
Summary:
* Extends `/api/docs/docId1/compare/docId2` endpoint with a `detail=1` option to include details of what changed in the document content.
* Adds an `/api/docs/docId/compare?left=HASH&right=HASH` endpoint for comparing two versions of a single document. This is needed to implement the extension to `/api/docs/docId1/compare/docId2`.
* Adds a `HashUtil` class to allow hash aliases like `HEAD` and `HEAD~`.
Everything is a bit crude:
* Changes are expressed as ActionSummary objects, which aren't fully fleshed out.
* Extra data about formula columns is inserted in an inflexible way.
This is extracted and cleaned up from https://phab.getgrist.com/D2600.
Test Plan: added tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2614
Summary:
Adds preferences to orgs. There are a few flavors:
* `userOrgPrefs`: these are specific to a certain user and a certain org.
* `orgPrefs`: these are specific to a certain org, and apply to all users.
* `userPrefs`: these are specific to a certain user, and apply to all orgs.
The three flavors of prefs are reported by `GET` for an org, and can be modified by `PATCH` for an org. The user needs to have UPDATE rights to change `orgPrefs`, but can change `userOrgPrefs` and `userPrefs` without that right since the settings only affect themselves.
Test Plan: added tests
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2572
Summary:
- Implemented selecting an org in some cases when using Save-Copy dialog.
- Unified previous 'Save Copy' menu into an enhanced "Share" menu.
- Renamed ExportMenu to ShareMenu, collect related code into it, and design the share button.
- Introduced trunkAccess property for forks, to know whether "Replace Original" is available.
- Simplified handling of fork() result, now that all code has been upgraded.
- Replaced 'Copy as Template' menu items with a checkbox in the Save-Copy dialog
- Removed copy links for examples in the DocMenu (to simplify, since not part of updated design)
- Updated the UI of the copying dialog.
Test Plan: Updated affected tests, added new test cases for copying when other orgs are a choice or not.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2561
Summary: This moves enough server material into core to run a home server. The data engine is not yet incorporated (though in manual testing it works when ported).
Test Plan: existing tests pass
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2552
Paul Fitzpatrick
George Gevoian
Jarosław Sadziński
Dmitry S