Summary:
- Open all links in a new tab
- Excluding not filled columns (to fix trigger formulas)
- Fixed Ref/RefList submission
- Removing redundant type definitions for Box
- Adding header menu item
- Default empty values in select control
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4166
Summary:
Forms improvements and following new design
- New headers
- New UI
- New right panel options
Test Plan: Tests updated
Reviewers: georgegevoian, dsagal
Reviewed By: georgegevoian
Subscribers: dsagal, paulfitz
Differential Revision: https://phab.getgrist.com/D4158
Summary:
Fixes a recent regression that would cause a record to be erroneously filtered
out whenever it was updated from a linked view.
Test Plan: Browser test.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D4163
Summary:
Adds initial implementation of form publishing, built upon WYSIWYS shares.
A simple UI for publishing and unpublishing forms is included.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: paulfitz, jarek
Differential Revision: https://phab.getgrist.com/D4154
Summary:
When linking using a Reference List column, there may be multiple source
records that show the same target record. With this change, we remember those
(rather than just pick one that shows the target record).
Test Plan: Added a browser test.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D4140
Summary:
This removes checking for full access in `onRecord/onRecords` when `includeColumns` is a non-default value. The check had two problems:
1. It relied on the access level being present in the URL query parameters, which doesn't work if the page has redirected. See the discussion in https://grist.slack.com/archives/C0234CPPXPA/p1702576602615509. There seems to be no way to reliably and synchronously check the access level.
2. Calling `onRecords` before `ready` and forgetting to handle an error from the access check meant that `ready` wouldn't be called, so Grist couldn't request the correct access level from the user. I made this mistake and it seems like a nasty footgun.
Ultimately this has no effect on security, as an error will still be raised, but in a place where the widget developer can't catch it. They'll still see an error message in the console, and they can still check the access level reliably using `onOptions`, so I think this is OK.
Test Plan: Updated nbrowser test
Reviewers: georgegevoian, paulfitz
Reviewed By: georgegevoian, paulfitz
Differential Revision: https://phab.getgrist.com/D4145
Summary:
A new widget type Forms. For now hidden behind GRIST_EXPERIMENTAL_PLUGINS().
This diff contains all the core moving parts as a serves as a base to extend this functionality
further.
Test Plan: New test added
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D4130
Summary:
If linking state changes multiple times frequently the code that simulates async operation is
wrongly debounced, which causes inverted order of execution. This fix makes sure that only the last
call to filter function is used.
Test Plan: Adding new test
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D4139
Summary:
When a widget `A` is selected by a widget `B` so that `A` is filtered, adding a new row to `A` uses the values in the selected row of `B` and the columns relevant to the linking as default values for the new row. This ensures that the new row matches the current linking filter and remains visible. However this would previously cause a sandbox error when one of the linking columns was a formula column, which doesn't allow setting values. This diff ignores formula columns when picking default values.
Since the value of the formula column in the new row typically won't match the linking filter, extra measures are needed to avoid the new row immediately disappearing. Regular filters already have a mechanism for this, but I didn't manage to extend it to also work for linking. Thanks @dsagal for creating `UnionRowSource` (originally in D4017) which is now used as the solution for temporarily exempting rows from both kinds of filtering.
While testing, I also came across another bug in linking summary tables that caused incorrect filtering, which I fixed with some changes to `DynamicQuerySet`.
Test Plan: Extended an nbrowser test, which both tests for the main change as well as the secondary bugfix.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D4135
Summary:
Selection in GridView wasn't updated when fields were removed, and the selected
column index was out of bounds.
Test Plan: New test added
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Differential Revision: https://phab.getgrist.com/D4137
Summary:
- "Add Column" -> "Add column"
- "Detect Duplicates in" -> "Detect duplicates in"
- "Last Updated At" -> "Last updated at"
- "Created By" (At) -> "Created by" (at)
- "Last Updated By" -> "Last updated by"
Test Plan: I looked at menu and cannot see any more capital letters anywhere other that begining of the menu position.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D4127
Summary:
When the 'new' row of a table is selected, another table filter linked to the first shows no data. This diff ensures that a third table filtered by the second also shows no data, i.e. that it behaves the same as if the second table was also on the 'new' row. Video of the bug: https://grist.slack.com/archives/C069RUP71/p1692622810900179
The functional code is copied almost verbatim from https://github.com/gristlabs/grist-core/pull/666 by @jvorob which was working correctly. A comment there mentioned a possible bug where:
> ...you can have the grayed-out "No row selected" text from disableEditing but still have rows showing up in the section. Haven't been able to reproduce...
I noticed this behaviour when I copied only part of the fix, but it disappeared after copying the whole thing, so it seems likely to me that this is why it couldn't be reproduced.
Test Plan: Added a new nbrowser test with a new fixture, which also tests filter link chains and selecting the new row more generally, since I couldn't find other tests of this.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: jvorob
Differential Revision: https://phab.getgrist.com/D4126
Summary: Descriptions can now be set on Raw Data table sections.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D4131
Summary:
- Node has a strong recommendation to assume bad state and exit promptly on
unhandled exceptions and rejections. We follow it, and only make an effort to
clean up before exiting, and to log the error in a more standard way.
- The only case seen in recent month of an unhandled rejection was for
attempting to write overly large JSON to a Client websocket. Ensure that's
handled, and add a test case that artificially reproduces this scenario.
Test Plan:
Added a test case for failing write to Client, and a test case that unhandled
errors indeed kill the server but with an attempt at cleanup.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4124
Summary: New Column menu was enhanced by "add column with type" and "add formula column" options. First one allow user to chose the type of newly created column, to save time for selecting this option in creator menu. "Add formula column" opens formula editor in popup state right after creating the column. In this case, renaming column popup is ignored to not overburden user with to many popup at once.
Test Plan: new nbrowser test was added to check validity of menu items, and output of menu action - if columns have given types or if formula editor popup is opened and functionin, accordingly.
Reviewers: georgegevoian
Differential Revision: https://phab.getgrist.com/D4113
Summary:
Adds remaining functionality, fixes, and polish to Record Cards and
removes their feature flag, enabling them by default.
Test Plan: Tests deferred; will be included in a follow-up diff.
Reviewers: jarek, paulfitz
Reviewed By: jarek
Subscribers: paulfitz, jarek
Differential Revision: https://phab.getgrist.com/D4121
Summary:
Adds a new Record Card view section to each non-summary table, which can be from opened from various parts of the Grist UI to view and edit records in a popup card view.
Work is still ongoing, so the feature is locked away behind a flag; follow-up work is planned to finish up the implementation and add end-to-end tests.
Test Plan: Python and server tests. Browser tests will be included in a follow-up.
Reviewers: jarek, paulfitz
Reviewed By: jarek
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D4114
Summary: Call a new user action `RemoveTransformColumns` in ActiveDoc shutdown.
Test Plan: Added nbrowser test
Reviewers: georgegevoian, paulfitz
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4107
Summary: Enabling the `GRIST_NEW_COLUMN_MENU` flag by default and removing it.
Test Plan: Existing
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4098
Summary:
Fix for a bug. Custom widget when collapsed and expanded was disconnecting from
Grist, as WidgetFrame was disposed to early.
Test Plan: Added new
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4109
Summary: Also fixes a few bugs found along the way, particularly that webhook payloads could contain stale data.
Test Plan: Added an nbrowser test, made existing test a bit more detailed.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D4102
This makes a few refinements to bundling widgets:
* A widget with `published: false` is not shown in the
custom widget dropdown in the UI. This is so widgets
can be bundled with the app for "native" use (like the
calendar widget) without immediately resulting in an
extra listing in the UI. (There are improvements we'd
like to make to the UI to better communicate widget
provenance and quality eventually, which would be a
helpful alternative to just a binary flag.)
* A relative path to the custom widget manifest is
respected. This will make the bundling process marginally
neater.
Summary:
When converting changing the type of Any column, try to guess
the widgetOptions. Especially important for choice and choiceList types.
Test Plan: Existing
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D4088
Summary:
This adds support for bundling custom widgets with the Grist app, as follows:
* Adds a new `widgets` component to plugins mechanism.
* When a set of widgets is provided in a plugin, the html/js/css assets for those widgets are served on the existing untrusted user content port.
* Any bundled `grist-plugin-api.js` will be served with the Grist app's own version of that file. It is important that bundled widgets not refer to https://docs.getgrist.com for the plugin js, since they must be capable of working offline.
* The logic for configuring that port is updated a bit.
* I removed the CustomAttachedView class in favor of applying settings of bundled custom widgets more directly, without modification on view.
Any Grist installation via docker will need an extra step now, since there is an extra port that needs exposing for full functionality. I did add a `GRIST_TRUST_PLUGINS` option for anyone who really doesn't want to do this, and would prefer to trust the plugins and have them served on the same port.
Actually making use of bundling will be another step. It'll be important to mesh it with our SaaS's use of APP_STATIC_URL for serving most static assets.
Design sketch: https://grist.quip.com/bJlWACWzr2R9/Bundled-custom-widgets
Test Plan: added a test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4069
Summary:
Adds a new interface `FetchSelectedOptions` with three keys (including the preexisting `keepEncoded`) and adds/updates an optional `options: FetchSelectedOptions` to six related functions which fetch data from the selected table or record. The `keepEncoded` and `format` options have different default values for different methods for backwards compatibility, but otherwise the different methods now have much more similar behaviour. The new `includeColumns` option allows fetching all columns which was previously only possible using `docApi.fetchTable` (which wasn't always a great alternative) but this requires full access to avoid exposing more data than before and violating user expectations.
Eventually, similar options should be added to `docApi.fetchTable` to make the API even more consistent.
Discussion: https://grist.slack.com/archives/C0234CPPXPA/p1696510548994899
Test Plan: Added a new nbrowser test with a corresponding fixture site and document, showing how the functions have different default option values but are all configurable now.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4077
Summary:
Tweaking behavior of the unreleased Add Column menu per feedback from
Anais and Dmitry.
Test Plan: WIP
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D4089
Summary: Adds tooltips to the menu and tests for recently-added functionality.
Test Plan: Browser tests.
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Subscribers: JakubSerafin
Differential Revision: https://phab.getgrist.com/D4087
Cleaning code that was wrongly merged during D4083
Test Plan: Manual smoke tests - create columns and references are working
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4085
Summary:
Reverse and Aggregation lookup.
Aggregation lookup works when table have a reference list column. It allow to list value of any fields of a referenced values, or to make some basic operation on them (sum, average, count)
Reverse lookup works as reverse one, but it allow do to the same operations on all rows that have reference to given row
Test Plan: Manual so far.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D4083
Summary:
A menu to be shown when new colum button is added. It's give access to various diffrent shortcuts, like adding new column, unhiding existing ones, fast adding lookup columns or trigger one (authoriship or timestamp). Design document can be found here: https://grist.quip.com/CTgxAQv9Ghjt/Add-Columns-more-easily
To turn on this menu flag GRIST_NEW_COLUMN_MENU to 1
Test Plan: UI tests suite under nbrowser/GridViewNewColumnMenu.ts
Reviewers: jarek, georgegevoian
Reviewed By: georgegevoian
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D4074
Summary:
Changes the minimum version of Node to 18, and updates the Docker images and GitHub workflows to build Grist with Node 18.
Also updates various dependencies and scripts to support building running tests with arm64 builds of Node.
Test Plan: Existing tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3968
Summary:
The switching between Common and Separate settings for a field was broken when
the field had never modified settings.
Test Plan: Added a test case that tickles the issue and tests the fix.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D4072
Summary:
- Adding tests for bidirectional linking
- Fixing loop bug for bidirectional linking in custom widgets which use row filtering
Test Plan: New tests
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Differential Revision: https://phab.getgrist.com/D4070
Summary:
- Adding new icon for calendar view (the old one by just bigger)
- When there are no columns to map the select box is grayed out
- Optional mappings can be cleared now
Test Plan: Added
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Subscribers: JakubSerafin
Differential Revision: https://phab.getgrist.com/D4066
Summary:
Interpret huge numbers (>8 digits) as timestamps when converting numeric column to date.
Convert date/date time columns to timestamp when converted from numeric/int column.
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: dsagal, alexmojaki
Differential Revision: https://phab.getgrist.com/D4030
Summary: to allow custom widget having optional translations, lagunage seeted in user profile is passed as query parameter to custom widget
Test Plan: test added to check if query parameter is existing in url when settings is changed in profile
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: jarek, paulfitz
Differential Revision: https://phab.getgrist.com/D4045
Summary:
The new Command API provides limited access to Grist Commands from within cusotm
widgets. This includes the ability to perform undo and redo, which is bound to
the same keyboard shortcut as Grist by default.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: paulfitz, jarek
Differential Revision: https://phab.getgrist.com/D4050
Summary:
Fixes a very specific bug reported here: https://grist.slack.com/archives/C069RUP71/p1694630242765769
The error occurred when:
1. Removing multiple columns simultaneously
2. Those columns were sources of groupby columns for a summary table (so removing them meant recreating the summary table and thus deleting its columns)
3. There was a display column for one of the columns that got deleted (either directly or indirectly) which was set to be automatically removed since it was no longer needed, but this failed because the column was already deleted as part of earlier table removal.
I fixed this by making `apply_auto_removes` remove table records last, so removing the display column wouldn't be a problem.
That fixed the original error, but then I noticed that trying to undo the removal could lead to another error (under even more specific circumstances). It's hard to see exactly why, but I can see that just 3 `RemoveColumn` user actions generated over 100 doc actions and corresponding undo actions, hence the difficulty in narrowing the problem down. This is partly because removing a single column would recreate a summary table, only for that table to be immediately replaced again when another column was removed. Making the frontend send a single `[BulkRemoveRecord, _grist_Tables_column, ...] ` leads to a more efficient and sensible process with about half as many doc actions and no undo error. I think this alone would also solve the original error, but the data engine change seems more generally helpful and worth keeping.
Test Plan: Added a Python test and an nbrowser test
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D4052
Test Plan: Added a test case that reproduces the bug and tests the fix
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D4057
Summary:
Adding new "Delete my account" button to the profile page that allows users to remove completely
their accounts as long as they don't own any team site.
Test Plan: Added
Reviewers: georgegevoian, paulfitz
Reviewed By: georgegevoian, paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D4037
Summary:
On mobile, tips for calendar and card list aren't currently
shown, but the creator panel was still automatically being
opened in preparation for showing the tip.
Test Plan: Manual and existing tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D4053
Allows bidirectional / cyclic linking for same-record cursor links.
This should allow multiple sections to all synchronize their cursors,
such that clicking in any one of them will move all the others.
Works even if some sections in the cycle have rows filtered out (the
filtered-out sections might desync their cursors, but the correct cursor
position will still propagate downstream, and they'll re-sync if clicking on
a row that is present in them)
Under the hood, each cursor has a _lastEditedAt counter, updated when
a user's action changes the cursor in a section, such that we can always
tell which section was touched most recently. This is used to resolve
conflicts stably when dealing with cycles or chains of cursor-links.
Updated selectBy and recursiveMoveToCursorPos to handle cycles
Updated tests for selectBy behavior
However, main bidirectional-linking tests are not in this commit, they'll come in a subsequent PR
Summary: Fixing flakiness in the test helper.
Test Plan: Existing
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D4051
Summary:
Polishes support for dark mode and enables syncing with the OS theme
by default.
Test Plan: Manual.
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Subscribers: JakubSerafin
Differential Revision: https://phab.getgrist.com/D4041
Summary:
In non-SaaS Grist, the AppHeader will no longer link to templates
page. Also, the last visited site is now reset when switching accounts.
Test Plan: Existing tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D4048
Summary:
The tip is shown in the creator panel, in the subtab that lists the column
mapping configuration for the calendar widget. The panel now automatically
opens the first time a calendar widget is added to a page (via the Add New menu).
Test Plan: Manual.
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Subscribers: JakubSerafin, jarek
Differential Revision: https://phab.getgrist.com/D4047
Summary:
Simple click (a click on a already focused cell) was opening the editor
even though user clicked an anchor in the cell.
Test Plan: Added test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D4044
Summary: Mapping for a single column in custom widgets accepts now multiple types as comma separeted list.
Test Plan: Added new
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Differential Revision: https://phab.getgrist.com/D4042
Summary:
In browser where user is logged in multiple times, she can start
creating a new site from docs org where user B is the default one, and end up on the
api endpoint where user A is the default one. This resulted in wrong userId in the handler.
Test Plan: New test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4029
* Linkingstate Refactor, and displaying link info in rightpanel
Big refactor to LinkingState
Collects descriptive/user-facing labels into FilterState
Unifies/cleans up some logic
Adds LinkTypeDescription, a string enum which can be used
to easily switch/case between various cases of linking, and
codifies the logic in one place (currently only used for linkInfo)
Adds Link info to creator panel, near SelectBy dropdown
Bugfix: Disables linking from Attachment columns
Bugfix/Behavior change: changed linking with empty RefLists to better
match behavior of refs.
for context: Linking by a blank Ref filters to show records with a
blank value for that Ref. Previously this didn't work with RefLists.
Linking from a blank refList would show no records
(except in some cases involving summary tables)
Fixed this so that linking by a blank val consistently means "show
all records where the corresponding col is blank"
* `GRIST_ANON_PLAYGROUND`: When set to 'false' deny anonymous users access to the home page
* `GRIST_FORCE_LOGIN`: Much like `GRIST_ANON_PLAYGROUND` but don't support anonymous access at all (features like sharing docs publicly requires authentication)
---------
Co-authored-by: Florent FAYOLLE <florent.fayolle@beta.gouv.fr>
Summary:
Duplicate document popup wasn't offering workspace selection for personal orgs.
Also, when workspace was removed, the URL wasn't updated which left user with an error page `workspace not found`.
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D4031
Summary:
The new "copyDoc" query parameter on the login page sets a short-lived cookie, which is
then read when welcoming a new user to copy that document to their Home workspace, and
redirect to it. Currently, only templates and bare forks set this parameter.
A new API endpoint for copying a document to a workspace was also added.
Test Plan: Browser tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3992
Summary:
Iframe with custom widget is marked with a test class `test-custom-widget-ready` when
it receives the `ready` message from the rendered widget.
Test Plan: Added and updated. Existing test should pass.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D4023
Summary: Added boilerplate code needed to create new wigets in "Add new" menu, that are wrapped around existing custom widgets. More details can be found here: https://grist.quip.com/larhAGRKyl6Z/Custom-widgets-in-Add-Widget-menu
Test Plan: nbowser tests added to verify if item in menu exits, if widget is rendered, and right side menu has widget selection and read access selection hided.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3994
Every fetch made from the client is logged to the console.
But this isn't really necessary, and is particularly confusing
in grist-static, where those fetches are virtualized.
Tests in grist-saas may need adjusting to remove the logger.
Summary:
Adding a new method `setCursorPos` in the widget API, and a new configuration option for the ready message `allowSelectBy` that exposes custom widgets in the `Select by` dropdown.
With this, a custom widget can control the position of the linked widgets and is able to change the column in the creator panel.
Test Plan: Added new test. Existing tests should pass.
Reviewers: JakubSerafin
Reviewed By: JakubSerafin
Subscribers: JakubSerafin
Differential Revision: https://phab.getgrist.com/D3993
Summary:
{F74398}
Refactored the 'radio checkboxes' in the modal for deleting a page and reused them here.
The option to download as a template already existed in the server code but wasn't being exercised by the frontend. Also added an option to remove just the history, which is the main motivation for this diff.
Test Plan: Expanded the existing nbrowser test.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3999
Summary:
The tooltip also broke recently on Firefox after upgrading Ace. This
includes a fix for the regression.
Test Plan: Updated test.
Reviewers: jarek
Reviewed By: jarek
Subscribers: jarek, dsagal
Differential Revision: https://phab.getgrist.com/D3982
Summary:
Moves some more relevant tests to grist-core.
Small change to declarations that seemed necessary when
running buildtools/build_core.sh now, but I'm not sure
what changed. CI hasn't flagged anything, so smells like
the version of some package not nailed down.
Test Plan:
tried running tests in new location using
buildtools/build_core.sh
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3996
Summary:
A floating formula editor is available by default and in the basic setup allows just formula modification.
AI assistant is now an optional component of the floating editor and it is controlled by OPENAPI_KEY presence.
Env variable GRIST_FORMULA_ASSISTANT was removed, new feature flag HAS_FORMULA_ASSISTANT is derived from the presence of OPENAPI_KEY.
Also updated anonymous signup nudge. By default it displays only info that this feature is only for logged in users.
Test Plan: updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3987
Summary:
This is to match the pricing page, and to reduce confusion. The same
change was made to the description of the corresponding "pricing" object
on Stripe. The Stripe value is what's used in practice; this value is
actually only used as a fallback.
Test Plan: The code change does not affect tests, but several tests fixed after grist-core merge.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3990
Summary: Column and widget descriptions now support links in text.
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3981
Summary:
TypeTransformation was flaky. Probably after upgrading AceEditor we introduced a race condition between updating the revised formula and doing the transformation. Now we explicitly make sure that the formula is updated.
I also fixed some other flaky tests.
Test Plan: Updated
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3984
* move getTemplateOrg method; enable template org in docker tests
This moves the `getTemplateOrg` method to a neutral venue for the
convenience of `grist-static`, otherwise a lot of awkward dependencies
get pulled in needlessly in new parts of the app.
This also fixes docker tests using the template org.
* allow Grist front-end to function when location history is unavailable
When the Grist front-end is embedded in an iframe, using a srcdoc
attribute, history.pushState and similar methods are unavailable.
Currently, that makes it impossible to navigate between Grist pages,
since an access error is thrown (behavior may be browser dependent).
With this change, navigation succeeds.
* give unrelated possibly slow test a little more time
Summary:
The changes are intended to smooth over some sharp edges when a signed-out user
is using Grist (particularly while on the templates site).
Test Plan: Browser tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3957
Summary:
Fixes a problem reported here: https://community.getgrist.com/t/exporting-the-records-in-a-linked-view/2556/4
The download CSV/Excel link now contains an additional `linkingFilter` URL parameter containing JSON-encoded `filters` and `operations`. This object is originally created in the frontend in `LinkingState`, and previously it was only used internally in the frontend. It would make its way via `QuerySetManager` to `QuerySet.getFilterFunc` where the actual filtering logic happened. Now most of that logic has been moved to a similar function in `common`. The new function works with a new interface `ColumnGettersByColId` which abstract over the different ways data is accessed in the client and server in this context. There's no significant new logic in the diff, just refactoring and wiring.
Test Plan: Expanded two `nbrowser/SelectBy*.ts` test suites to also check the contents of a downloaded CSV in different linking scenarios.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3961
A date test was noted to fail, with a formula intended for
a cell ending up in the column header. This may help.
Entering formulas reliably requires waiting for a particular
focus state.
This test appears to fail if toasts aren't issued fast enough
(perhaps because an empty toast list may count as truthy?).
I might be missing something since I don't understand the
purpose of waitForOverflownMessageToDisappear apart from
lengthening a timeout.
Summary:
WindowDimensions from gristUtils needs exporting
after it got moved to another file.
Test Plan: existing tests should pass
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D3971
It would be useful to write browser tests that use Grist for some
of our other repositories (e.g. grist-widget, grist-static).
This is a first baby step to factor out some useful code that has
no code dependencies beyond mocha-webdriver, for use in grist-widget.
Summary: Using standard tost notification, message about webhook queue being overflown was added. message is permanent as long as queue is full. Message contains linkt to the webhook setings
Test Plan: two nbrowser test was added - one to check if message is show when queue is full, and second to check if message is dismiss when queue was cleaned.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3929
Test Plan: Added a check to the emoji test.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D3951
Summary:
Adding limits for AI calls and connecting those limits with a Stripe Account.
- New table in homedb called `limits`
- All calls to the AI are not routed through DocApi and measured.
- All products now contain a special key `assistantLimit`, with a default value 0
- Limit is reset every time the subscription has changed its period
- The billing page is updated with two new options that describe the AI plan
- There is a new popup that allows the user to upgrade to a higher plan
- Tiers are read directly from the Stripe product with a volume pricing model
Test Plan: Updated and added
Reviewers: georgegevoian, paulfitz
Reviewed By: georgegevoian
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3907
Summary:
In a selector table, when a selected row is filtered out of view, linked widgets should update based on the newly selected row.
There were a few bugs that contributed to this wrong behavior:
- Gridview wasn't subscribing to the current row id, and the row with id 'new' was being converted to the first row
- Cursor was keeping track of the currently selected row id, it was hiding a problem behind the proper rowIndex
- Undo/redo somehow leveraged the wrong rowId from the cursor during the position restore.
The `No data` text was also changed to be more meaningful.
Test Plan: Added and updated.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3937
Jarosław Sadziński
George Gevoian
Dmitry S
Alex Hall
Jakub Serafin
Paul Fitzpatrick
George Gevoian
Janet Vorobyeva
Florent
Philip Standt
CamilleLegeron
Vincent Viers