Summary:
for users who don't automatically have deep rights
to the document, provide them with attachment metadata only
for rows they have access to. This is a little tricky to
do efficiently. We provide attachment metadata when an
individual table is fetched, rather than on initial document
load, so we don't block that load on a full document scan.
We provide attachment metadata to a client when we see that
we are shipping rows mentioning particular attachments,
without making any effort to keep track of the metadata they
already have.
Test Plan: updated tests
Reviewers: dsagal, jarek
Reviewed By: dsagal, jarek
Differential Revision: https://phab.getgrist.com/D3722
Summary:
Adds a cell selection summary to grid view that shows either a count or
sum of all the selected values. Implementation was done by Dmitry.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: paulfitz, dsagal, jarek
Differential Revision: https://phab.getgrist.com/D3630
Summary: Extend the way ACL resources are read in the server so that if a rule applies to a specific column then that rule also applies to helper columns belonging to that column, as well as helper columns belonging to fields which display that column. This is particularly intended for display columns of reference columns, but it also applies to conditional formatting rule columns.
Test Plan: Added a server test
Reviewers: paulfitz, jarek
Reviewed By: paulfitz, jarek
Differential Revision: https://phab.getgrist.com/D3628
Summary:
When a user requests to read the contents of an attachment, only allow the request if there exists a cell in an attachment column that contains the attachment and which they have read access to.
This does not cover:
* Granular write access for attachments. In particular, a user who can write to any attachment column should be considered to have full read access to all attachment columns, currently.
* Access control of attachment metadata such as name and format.
The implementation uses a sql query that requires a scan, and some notes on how this could be optimized in future. The web client was updated to specify the cell to check for access, and performance seemed fine in casual testing on a doc with 1000s of attachments. I'm not sure how performance would hold up as the set of access rules grows as well.
Test Plan: added tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3490
Summary:
A new way for renaming tables.
- There is a new popup to rename section (where you can also rename the table)
- Renaming/Deleting page doesn't modify/delete the table.
- Renaming table can rename a page if the names match (and the page contains a section with that table).
- User can rename table in Raw Data UI in two ways - either on the listing or by using the section name popup
- As before, there is no way to change tableId - it is derived from a table name.
- When the section name is empty the table name is shown instead.
- White space for section name is allowed (to discuss) - so the user can just paste ' '.
- Empty name for a page is not allowed (but white space is).
- Some bugs related to deleting tables with attached summary tables (and with undoing this operation) were fixed (but not all of them yet).
Test Plan: Updated tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: georgegevoian
Differential Revision: https://phab.getgrist.com/D3360
Summary:
- Adds a dependency moment-guess (https://github.com/apoorv-mishra/moment-guess) to guess date formats from strings. However the npm package is missing source maps which leads to an ugly warning, so currently using a fork until https://github.com/apoorv-mishra/moment-guess/pull/22 is resolved.
- Adds guessDateFormat using moment-guess to determine the best candidate date format. The logic may be refined for e.g. lossless imports where the stakes are higher, but for now we're just trying to make type conversions smoother.
- Uses guessDateFormat to guess widget options when changing column type to date or datetime.
- Uses the date format of the original column when possible instead of guessing.
- Fixes a bug where choices were guessed based on the display column instead of the visible column, which made the guessed choices influenced by which values were referenced as well as completely broken when converting from reflist.
- @dsagal @georgegevoian This builds on https://phab.getgrist.com/D3265, currently unmerged. That diff was created first to alert to the change. Without it there would still be similar test failures/changes here as the date format would often be concretely guessed and saved as YYYY-MM-DD instead of being left as the default `undefined` which is shows as YYYY-MM-DD in the dropdown.
Test Plan: Added a unit test to `parseDate.ts`. Updated several browser tests which show the guessing in action during type conversion quite nicely.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Subscribers: dsagal, georgegevoian
Differential Revision: https://phab.getgrist.com/D3264
Summary:
Add more method overrides to MetaTableData for extra type safety.
Use MetaTableData, MetaRowRecord, and getMetaTable in more places.
Test Plan: Mostly it just has to compile. Tested manually that types are being checked more strictly now, e.g. by adding a typo to property names. Some type casting has also been removed.
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3168
Summary: Refactoring in preparation for parsing strings from the API. The plan is that the API code will only need to do a server-side version of the code in ViewFieldRec.valueParser (minus ReferenceUtils) which is quite minimal.
Test Plan: Nothing extra here, I don't think it's needed. This stuff will get tested more in a future diff which changes the API.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3164
Summary:
Handle reference columns in ViewFieldRec.valueParser.
Extracted code for reuse from ReferenceEditor to look up values in the visible column. While I was at it, also extracted a bit of common code from ReferenceEditor and ReferenceListEditor into a new class ReferenceUtils. More refactoring could be done in this area but it's out of scope.
Changed NTextEditor to use field.valueParser, which affects numeric and reference fields. In particular this means numbers are parsed on data entry, it doesn't change anything for references.
Test Plan:
Added more CopyPaste testing to test references.
Tested entering slightly formatted numbers in NumberFormatting.
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3094
Summary:
- Anchor links with row of 'new' could be created but weren't parsed or used
correctly. This fixes it.
- Also adds UIRowId type for row IDs which includes the special 'new' row. It's
already been used in places as `number|'new'`, this diff gives it a name usable in app/common
(it doesn't touch another name, RowId, that's been available in app/client).
Test Plan: Added a test assert for anchor links to new row
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3039
Summary:
See https://grist.quip.com/VKd3ASF99ezD/Outgoing-Webhooks
- 2 new DocApi endpoints: _subscribe and _unsubscribe, not meant to be user friendly or publicly documented. _unsubscribe should be given the response from _subscribe in the body, e.g:
```
$ curl -X POST -H "Authorization: Bearer 8fd4dc59ecb05ab29ae5a183c03101319b8e6ca9" "http://localhost:8080/api/docs/6WYa23FqWxGNe3AR6DLjCJ/tables/Table2/_subscribe" -H "Content-type: application/json" -d '{"url": "https://webhook.site/a916b526-8afc-46e6-aa8f-a625d0d83ec3", "eventTypes": ["add"], "isReadyColumn": "C"}'
{"unsubscribeKey":"3246f158-55b5-4fc7-baa5-093b75ffa86c","triggerId":2,"webhookId":"853b4bfa-9d39-4639-aa33-7d45354903c0"}
$ curl -X POST -H "Authorization: Bearer 8fd4dc59ecb05ab29ae5a183c03101319b8e6ca9" "http://localhost:8080/api/docs/6WYa23FqWxGNe3AR6DLjCJ/tables/Table2/_unsubscribe" -H "Content-type: application/json" -d '{"unsubscribeKey":"3246f158-55b5-4fc7-baa5-093b75ffa86c","triggerId":2,"webhookId":"853b4bfa-9d39-4639-aa33-7d45354903c0"}'
{"success":true}
```
- New DB entity Secret to hold the webhook URL and unsubscribe key
- New document metatable _grist_Triggers subscribes to table changes and points to a secret to use for a webhook
- New file Triggers.ts processes action summaries and uses the two new tables to send webhooks.
- Also went on a bit of a diversion and made a typesafe subclass of TableData for metatables.
I think this is essentially good enough for a first diff, to keep the diffs manageable and to talk about the overall structure. Future diffs can add tests and more robustness using redis etc. After this diff I can also start building the Zapier integration privately.
Test Plan: Tested manually: see curl commands in summary for an example. Payloads can be seen in https://webhook.site/#!/a916b526-8afc-46e6-aa8f-a625d0d83ec3/0b9fe335-33f7-49fe-b90b-2db5ba53382d/1 . Great site for testing webhooks btw.
Reviewers: dsagal, paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3019
Summary:
It can be hard to find changes, even when highlighted, in a table with many rows. This diff replaces long sequences of unchanged rows with a row containing "..."s.
With daff, I found that it is important to do this for sequences of unchanged columns also, but not tackling that yet.
Test Plan: added test
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2666
Summary:
AccessRules class that implements that UI is intended to look vaguely like
detailed rules might look in the future, but only supports the very limited set
we have now.
In addition, UserManager and BillingPage code is separated into their own webpack bundles, to reduce the sizes of primary bundles, and relevant code from them is loaded asynchronously.
Also add two TableData methods: filterRowIds() and findMatchingRowId().
Test Plan: Only tested manually, proper automated tests don't seem warranted for this temporary UI.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D2620
Summary: This moves enough server material into core to run a home server. The data engine is not yet incorporated (though in manual testing it works when ported).
Test Plan: existing tests pass
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D2552
