Summary:
When a chart page/section is added and the creator panel is already open, focus is set to a "table" tab.
When a custom view is added as a page/section, the same thing happens, but there is also a behavioral tooltip shown
for the custom URL.
Test Plan: Updated and added.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3857
Summary:
Ports more test/browser tests from *.test.js (run using an old selenium setup) to *.ntest.js (run using newer setup).
Weird test failures happened due to a change in timing. Eventually tracked in down to billing changes in one test suite resulting in reloads in another test suite, since it turns out redis pub/sub channels are not scoped to the redis database specified in REDIS_URL, but are global:
https://redis.io/docs/manual/pubsub/#database--scoping.
Test Plan: Ported tests should run and pass
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3844
Summary:
The substring for the anchor link row id was missing a leading ".", which was
a problem because tutorial fork ids would sometimes contain the substring.
Test Plan: N/A
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3853
Summary: Fixing the bug by setting viewInstance on the temp viewsection record
Test Plan: Added
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3848
This updates the expected count of languages in a localization test
to omit translations that have been started but are not yet ready
to be offered to users by default.
Summary:
Adds a new endpoint to update webhook.
Perform some refactoring to allow code reuse from endpoint allowing to _subscribe and _unsubscribe webhooks.
One aspect of webhook is that url are stored in the home db while the rest of the fields (tableRef, isReadyColRef, ...) are stored in sqlite. So care must be taken when updating fields, to properly rollback if anything should fail.
Follow up diff will bring UI to edit webhook list
Test Plan: Updated doc api server tests
Reviewers: jarek
Reviewed By: jarek
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3821
Summary:
In certain scenarios, it's possible for a Grist tour and a tip that kicks off
an easter egg to be shown on screen at the same time. To deconflict, we
now check for the presence of one or the other and avoid showing both.
Test Plan: Browser tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3840
Summary:
This is to prevent too many popups from being shown on screen at any
given moment.
Test Plan: Tested manually.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3841
Summary:
For now only html stub and docList adjustement for showing a tutorial card.
It will be used in future diffs after tutorial implementation.
Test Plan: Manual
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3750
Summary:
We have an important batch of old browser tests that depend on a pseudo-promise manager selenium's node client used to have. That manager was dropped in v4 (see changelog https://github.com/SeleniumHQ/selenium/blob/trunk/javascript/node/selenium-webdriver/CHANGES.md).
I tried porting some wholesale to our newer style of writing tests, and it is a bit of a bear (and would also be hard work to review). So instead I tried something else: remapping the `webdriverjq` implementation to work with mocha-webdriver. This works pretty well. Some API differences are hard to reconcile, but so far most test code just needs async/await changes to port, meaning a lot less thinking, and probably easier to review overall.
The important property of the ports tests is that they no longer import or require `selenium-webdriver`. mocha-webdriver depends on selenium-webdriver, but a newer version.
I haven't tried dealing with types, since that doesn't matter much - these tests aren't under active development, they are just important for preventing regressions.
Follow up work would be porting the remainder of the tests which, while a slog, I'm hoping is no longer a quagmire. Once the tests are ported, I'd propose moving them to `core`.
Test Plan: Test porting
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3825
Summary:
The feature is behind a flag GRIST_FORMULA_ASSISTANT (must be "true"). But can be enabled in the
developer console by invoking GRIST_FORMULA_ASSISTANT.set(true).
Keys can be overriden in the document settings page.
Test Plan: For now just a stub test that checks if this feature is disabled by default.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3815
Summary:
The previous implementation for collapsing sections involved disposing of a view instance (Grid or Chart component). This caused numerous bugs with
linking sections as the implementation is located in the BaseView.js. Now the view instance is kept and attached to a dom in a hidden div, so it can respond
and function as a normal rendered section. It is also passed from between collapsed and main layout, when sections are dragged or moved using section's
menu commands (`collapse` and `add to main page`)
It also implies that the ViewLayout must still be rendered when a section is maximized (as it is responsible for the view instance), so the dom, and
some logic for rendering it, had to be changed.
Test Plan: New and updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3826
Summary:
Documents can now be flagged as tutorials, which causes them to display
Markdown-formatted slides from a special GristDocTutorial table. Tutorial
documents are forked on open, and remember the last slide a user was on.
They can be restarted too, which prepares a new fork of the tutorial.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3813
Summary:
Porting script that run an evaluation against our formula dataset.
To test you need an openai key (see here: https://platform.openai.com/)
or hugging face (it should work as well), then checkout the branch and run
`OPENAI_API_KEY=<my_openai_api_key> node core/test/formula-dataset/runCompletion.js`
Test Plan:
Needs manually testing: so far there is no plan to make it part of CI.
The current score is somewhere around 34 successful prompts over a total of 47.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3816
Summary:
Usage is simply to call `overflowTooltip()` with no arguments, as an argument
to an element whose text may overflow. On 'mouseenter', it'll check for
overflow and show the element's .textContent in a tooltip.
- Added for long table names in the widget picker (Add Page, Add Widget to Page).
- Added for long page names in the left-panel list of pages.
Test Plan: Added test cases for the new overflow tooltips
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3814
Summary:
Fixes a bug when in a linked widget, the automatic reference wasn't being set
for a new record if attachment is the first thing that gets added to the
record.
- Move handling of 'setCursorPos' pseudo-command to GristDoc to support cross-section switching (relevant when moving attachment into a cell of a non-active page widget)
- Modernize code for AttachmentsWidget slightly (better typings, css conventions)
- Change the fix in https://phab.getgrist.com/D3796 from using isolate to using different z-index values, to avoid a change in the look of the cursor on Attachment cells.
Test Plan: Added a test case for what's possible to test with webdriver.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3811
This sets up a framework for running tests in parallel.
It increases the total time taken (since some steps are
repeated) but reduces the turn-around time significantly
overall.
The main objective is to make it possible to release more
test batches to grist-core without bringing CI to a crawl.
The clever little test/split-test.js script is from the
Grist Labs mono-repo and is Dmitry's work.
I considered doing the build in one job, and copying
it to test jobs, since it feels wasteful to repeat it.
That may be worth trying, especially if we start getting
jobs backing up (total concurrent Linux jobs on free plan
is quoted at 20).
It might also be worth looking at doing some tests in
parallel on the same worker, perhaps using the relatively
new MOCHA_WORKER_ID feature, since the tests are often not
actually CPU or I/O bound.
Summary:
A feature that allows minimizing widgets on the ViewLayout.
- Code in ViewLayout and Layout hasn't been changed. Only some methods or variables were made public, and some events are now triggered when a section is dragged.
- Widgets can be collapsed or expanded (added back to the main area)
- Collapsed widgets can be expanded and shown as a popup
- Collapsed widgets support drugging, reordering, and transferring between the main and collapsed areas.
Test Plan: New test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3779
Summary:
Fixes a test util that broke after a sync with grist-core, and upgrades
fixtures after a migration was added.
Test Plan: N/A
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3810
Summary:
Shows a placeholder flag icon for the language picker button when a country flag
isn't available.
The country flag icon is displayed on top of the placeholder icon. For countries
where an icon isn't available, the placeholder will then become visible.
This fixes a bug where no icon was shown for languages that didn't have a flag
icon available.
Test Plan: Tested manually.
Reviewers: jarek
Reviewed By: jarek
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3805
Summary:
Adds information about forks to the home db. This will be used
later by the UI to list forks of documents.
Test Plan: Browser and server tests.
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3772
Summary:
- Preserving cursor position when linked state is removed.
- Moving linking tests to grist core.
- Disabling yarn offline mirror for grist-core. This helps testing grist-core when it is imported as a submodule.
- Moving one test for linked section from ReferenceColumns.ts to RightPanelSelectBy.ts.
Test Plan: Updated
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3795
Summary:
The coaching call popup wasn't being dismissed correctly in the
HomeIntro tests.
Test Plan: N/A
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3788
Summary:
The "Empty values last" options was breaking sort when multiple
columns are involved in the sort spec. Problem comes from wrong
handling of equals.
Diff fixes that issue and update test.
Test Plan: Updates nbrowser test
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3774
Summary:
New language selector on the Account page for logged-in users.
New icon for switching language for an anonymous user.
For anonymous users, language is stored in a cookie grist_user_locale.
Language is stored in user settings for authenticated users and takes
precedence over what is stored in the cookie.
Test Plan: New tests
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3766
Summary:
This diff implement new page for document settings which replaces the old modal settings.
Diff also adds a new `Settings + API` page item below tools in the left panel that link to that very doc settings page.
Test Plan: Updated existing tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3761
Summary:
New icon to expand an active section and show it as a popup (just like raw data views).
"Show raw data" popup couldn't be reused (as it is basically a different page), so now
we have two kinds of popups that look the same.
1. Raw data popup - to show an alien section on a page (a section from a different view). This is used by "Show raw data" button, it is basically a different page that shows an arbitrary section.
2. Layout popup - a popup generated by Layout.ts that basically hides every other section and adds an overlay effect to itself.
Other changes
- Layout.js was migrated to typescript
- "Show raw data" menu item was converted to link
Test Plan: new tests
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3764
Summary:
Fixes deployment test failures that were caused by a test user
being deleted and recreated, which consequently reset their
preferences and made popups and tips always appear.
Test Plan: N/A
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3768
Summary:
- Introduces a fictitious "*SPECIAL:SchemaEdit" resource in UI only.
- Hides "S" bit for the default rule section.
- Shows a checkbox UI similar to other checkboxes, with an additional
dismissable warning.
Test Plan: Added a browser test
Reviewers: paulfitz, georgegevoian
Reviewed By: paulfitz, georgegevoian
Differential Revision: https://phab.getgrist.com/D3765
Summary:
Date filter was not taking timezone correclty into account, which was
causing to wrong-inclusion and wrong-exclusion of dates near the
bounds.
Diff fixes that, it also bring little refactoring that hopefully clarifies things a little.
Test Plan: Includes brand new test for `app/common/ColumnFilterFunc`.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3763
There was no script for updating typescript schema information after
a python-based document migration. Moving one in here, along with its
test. Tweaked the code slightly to work with grist-core's directory
structure. Also fixed a formatting error in mocha calls that was resulting
in some root tests not running.
Summary: In Access rules page item, adds “…” buttons that shows a menu of users to view-as:
Test Plan: Include new nbrowser test
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3751
Summary:
By default editor inherits permission for a new document or workspace.
Now editor is added explicitly as an owner of a new doc or workspace.
Test Plan: Updated
Reviewers: georgegevoian, paulfitz
Reviewed By: georgegevoian, paulfitz
Subscribers: dsagal, paulfitz
Differential Revision: https://phab.getgrist.com/D3734
Summary:
By default the fallback contains the prefix, which doesn't
work well with a key based translations. Now makeT helper will fallback
to the passed key (without a prefix).
Test Plan: Added new client test
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3758
Summary:
On mobile view not all rows are rendered when a section is expanded.
Scrolly component calculates height of the GridView too soon (before animation is
completed). With this change on mobile view we always take the screen height for
calculation.
A similar bug was on Card List, where cards were squeezed and their height was
calculated to soon.
Test Plan: Added test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3748
Summary: Adds a search input at the top of columns dropdown. Start typing in the search bar filters the list of column (matching occurences should work similarly as the autocomplete dropdown on Choice column).
Test Plan: Include tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3738
Summary: This test has been added to core. This diff also updates some storage-related code in monorepo to match changes in core.
Test Plan: moving test
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3746
Summary:
for users who don't automatically have deep rights
to the document, provide them with attachment metadata only
for rows they have access to. This is a little tricky to
do efficiently. We provide attachment metadata when an
individual table is fetched, rather than on initial document
load, so we don't block that load on a full document scan.
We provide attachment metadata to a client when we see that
we are shipping rows mentioning particular attachments,
without making any effort to keep track of the metadata they
already have.
Test Plan: updated tests
Reviewers: dsagal, jarek
Reviewed By: dsagal, jarek
Differential Revision: https://phab.getgrist.com/D3722
Summary:
Staging tests were failing because a popup tip was shown when
anonymous; these tips aren't dismissed by testing hooks during
deployment tests, and so they need to be explicitly dismissed by
tests (in this case, Forks.ts).
grist-core tests were failing because a test suite was accidentally
included that shouldn't have been (BehavioralPrompts.ts).
Test Plan: N/A
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3741
Summary:
Also fixes a deployment test failure in staging due to a test util
throwing a (harmless) error.
Test Plan: Tested manually.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3740
Summary:
Adds a new category of popups that are shown dynamically when
certain parts of the UI are first rendered, and a free coaching
call popup that's shown to users on their site home page.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3706
Summary:
Checking SCHEMA_EDIT permission when user wants to
update document's name.
Test Plan: New test
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3733
Summary:
Implements the new date filtering panel. Design results from long
discussion between: Alex, Anais, Cyprien and Dmitry.
Test environment: https://grist-new-date-range-filter.fly.dev/
Test Plan: Include various new tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3720
Summary:
- New /webhooks event that lists all webhooks in a document (available for owners),
- Monitoring webhooks usage and saving it in memory or Redis,
- Loosening _usubscribe API endpoint, so that the information returned from the /webhook endpoint is enough to unsubscribe,
- Owners can remove webhook without the unsubscribe key.
The endpoint lists all webhooks that are registered in a document, not just webhooks from a single table.
There are two status fields. First for the webhook, second for the last request attempt.
Webhook can have 5 statuses: 'idle', 'sending', 'retrying', 'postponed', 'error', which roughly describes what the
sendLoop is currently doing. The 'error' status describes a situation when all request attempts failed and the queue needs
to be drained, so some requests were dropped.
The last request status can only be: 'success', 'failure' or 'rejected'. Rejected means that the last batch was dropped because the
queue was too long.
Test Plan: New and updated tests
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3727
Summary:
Adds a new UI for writing access rule memos.
Migrates old memos (written as Python comments) to the new UI.
Test Plan: Browser and migration tests.
Reviewers: jarek, dsagal
Reviewed By: jarek
Subscribers: dsagal, paulfitz
Differential Revision: https://phab.getgrist.com/D3726
Summary:
Creating an API endpoint to cancel any queued webhook messages from
a document.
Test Plan: Updated
Reviewers: paulfitz, georgegevoian
Reviewed By: paulfitz, georgegevoian
Differential Revision: https://phab.getgrist.com/D3713
Summary:
- Handle the possibility that any access to localStorage causes error.
- Move getStorage() and getSessionStorage() safe functions to a separate file.
- Use these safe functions in more places.
Test Plan:
Added a test case, using a webdriver instance that blocks third-party cookies,
to enforce third-party restrictions. Added to gristUtil a way to override the
webdriver instance.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3719
Summary:
Guest editors added to a document were able to remove it. This limits this permission
by allowing only owners of a doc to delete it.
Test Plan: Updated
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal, anaisconce
Differential Revision: https://phab.getgrist.com/D3708
Summary:
The sort and filter UI now has a more unified UI, with similar
capabilities that are accessible from different parts of Grist.
It's now also possible to pin individual filters to the filter bar,
which replaces the old toggle for showing all filters in the
filter bar.
Test Plan: Various tests (browser, migration, project).
Reviewers: jarek, dsagal
Reviewed By: jarek, dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3669
Summary:
View as feature uses example.com emails for simulated users. This can break
when such a user already exists in the home db. Here we pretend that these users
don't exist during ACL checks.
Test Plan: Updated and existing
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3705
Summary:
Fix for layout editor when fields are removed using the creator panel. Layout editor
wasn't updated properly when "layoutSpecs" were changed.
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3700
Summary:
When a grid is scrolled, and then data is changed (due to click in a linked section), some
records are not rendered, or position of the scroll container is corrupted
Test Plan: Added
Reviewers: dsagal
Reviewed By: dsagal
Differential Revision: https://phab.getgrist.com/D3661
Summary:
The /replace endpoint was built with home-level access control in mind. Updates needed:
* Only an owner can now replace a document. Only owners are permitted to change granular access rules, and a document replacement could change granular access rules.
* For the document being substituted in: the user must have complete access to view all material within it.
Test Plan: extended test
Reviewers: georgegevoian, dsagal
Reviewed By: georgegevoian, dsagal
Differential Revision: https://phab.getgrist.com/D3694
Summary:
Allow requests from untrusted origins instead of returning an error, but don't allow credentials (Cookie header) or API keys (Authorization header).
Allow setting the header `Content-type: application/json` as an alternative to `X-Requested-With: XMLHttpRequest` to make it easier for clients to make POST/PUT/PATCH/DELETE requests without authentication.
Discussion: https://grist.slack.com/archives/C0234CPPXPA/p1666355281535479
Test Plan: Added and updated DocApi tests. Tested manually how this affects requests made from a browser.
Reviewers: paulfitz, dsagal
Reviewed By: paulfitz, dsagal
Differential Revision: https://phab.getgrist.com/D3678
The server.restart functionality in tests uses `TEST_CLEAN_DATABASE`. Make sure the way it wants to set this variable takes precedence over the environment.
Add some more `waitForServer`s near clicks.
Co-authored-by: George Gevoian <george@gevoian.com>
Summary:
When a page is hidden, all its nested pages are shown as children of
a different page that happens to be before (as in pagePos) that page.
This diff shows those pages as CENSORED.
Test Plan: Updated
Reviewers: alexmojaki
Reviewed By: alexmojaki
Subscribers: alexmojaki
Differential Revision: https://phab.getgrist.com/D3670
Summary:
The renaming is to clarify that the operation is more of a schema change, than
a data update. In particular, this is to reduce confusion why it is allowed to
anyone having Structure permission in Access Rules.
The resetting of type is a separate but related cleanup. Changing type to Any
returns the column to initial state, letting it guess type from new data, and
making it easy to enter a formula. It applies also to the "Clear and reset"
option in the Creator Panel.
Test Plan: Updated tests, added a check for type changing to Any.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3685
Summary: Background for frozen columns was set to transparent in recent PR, this diff is reverting it.
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3680
Summary:
Moving bulk of nbrowser tests to core. Some tests were split and only part of them were moved.
Tests that are left are either: not suitable for grist-core (like billing) or are failing during browser tests (are not reliable).
Four fixtures directory (uploads, docs, exports-csv/excel) where completely moved to grist-core and are linked as folders.
Those changes allows to add an nbrowser test in grist-core or in the main test folder without any need to link it or link a fixture document.
Other changes:
- testrun.sh has been modified, now it runs tests from both folders (test and core/test),
- TestServer used in grist-core is now adding sample orgs and users (kiwi and others),
Test modified
- SelectionSummary: now it is run on a bigScreen, it was failing randomly
- Billing.ts: relative paths were used
- DateEditor: added waitForServer - it was failing in browser mode
- FrozenColumns, ImportFromGDrive, Printing: updated import paths
- UserManager.ts: was split into two parts (it assumed limited products)
- ViewLayoutResize.ts: this test is still in main repo, it is still failing in browser mode tests
Test Plan: Existing
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: dsagal, paulfitz
Differential Revision: https://phab.getgrist.com/D3664
Summary:
After introducing multi columns operation, color picker
could save a cell style for a wrong column, if the save operation
was triggered by user clicking on one of the cells.
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3668
Summary:
New shortcuts for removing and adding rows.
For adding a row we now have Mod+(Shift)+Enter
For removing rows we now have Mod+Delete/Mod+Backspace
Before removing rows, the user is prompted to confirm, this prompt
can be dismissed and this setting can be remembered. User needs
to confirm only when using shortcut.
Old shortcuts are still active and shows information about this change.
This information is shown only once, after this shortcuts have default
behavior (zooming).
New users don't see this explanation.
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3655
Summary:
Editing data selection would sometimes cause columns to be hidden in the updated view. A
missing conditional was the culprit: generally, field visibility shouldn't be modified after the view is
updated, but we make an exception for charts to keep certain fields visible or hidden between
updates, so that chart configuration doesn't change too significantly and cause unexpected
data to be displayed. This special behavior for charts was erroneously being applied to non-charts
as well.
Also, when no columns were visible in a view, opening the row menu would cause an error to be
thrown. A loop was inadvertently using null control variables - an explicit check for non-null loop
variables was added, which skips the loop when no columns are visible.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3650
Summary:
Fixes bug that prevented the table of a reference list from being
changed in the column transform UI.
Test Plan: Browser test.
Reviewers: jarek
Reviewed By: jarek
Differential Revision: https://phab.getgrist.com/D3666
Summary:
First iteration for comments system for Grist.
- Comments are stored in a generic metatable `_grist_Cells`
- Each comment is connected to a particular cell (hence the generic name of the table)
- Access level works naturally for records stored in this table
-- User can add/read comments for cells he can see
-- User can't update/remove comments that he doesn't own, but he can delete them by removing cells (rows/columns)
-- Anonymous users can't see comments at all.
- Each comment can have replies (but replies can't have more replies)
Comments are hidden by default, they can be enabled by COMMENTS=true env variable.
Some things for follow-up
- Avatars, currently the user's profile image is not shown or retrieved from the server
- Virtual rendering for comments list in creator panel. Currently, there is a limit of 200 comments.
Test Plan: New and existing tests
Reviewers: georgegevoian, paulfitz
Reviewed By: georgegevoian
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3509
Summary:
Creator panel allows now to edit multiple columns at once
for some options that are common for them. Options that
are not common are disabled.
List of options that can be edited for multiple columns:
- Column behavior (but limited to empty/formula columns)
- Alignment and wrapping
- Default style
- Number options (for numeric columns)
- Column types (but only for empty/formula columns)
If multiple columns of the same type are selected, most of
the options are available to change, except formula, trigger formula
and conditional styles.
Editing column label or column id is disabled by default for multiple
selection.
Not related: some tests were fixed due to the change in the column label
and id widget in grist-core (disabled attribute was replaced by readonly).
Test Plan: Updated and new tests.
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3598
Summary:
- DocApi test for Allowed Origin was using a home server endpoint
- Fixing waitForServer, as gristApp can be unavailable for a moment when browser is refreshed
- Fixing MergedOrgs tests typing issue
Test Plan: Updated
Reviewers: cyprien, paulfitz
Reviewed By: cyprien, paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3648
Summary:
Adds a cell selection summary to grid view that shows either a count or
sum of all the selected values. Implementation was done by Dmitry.
Test Plan: Browser tests.
Reviewers: jarek
Reviewed By: jarek
Subscribers: paulfitz, dsagal, jarek
Differential Revision: https://phab.getgrist.com/D3630
Summary:
This diff adds a new `BulkAddOrUpdateRecord` user action which is what is sounds like:
- A bulk version of the existing `AddOrUpdateRecord` action.
- Much more efficient for operating on many records than applying many individual actions.
- Column values are specified as maps from `colId` to arrays of values as usual.
- Produces bulk versions of `AddRecord` and `UpdateRecord` actions instead of many individual actions.
Examples of users wanting to use something like `AddOrUpdateRecord` with large numbers of records:
- https://grist.slack.com/archives/C0234CPPXPA/p1651789710290879
- https://grist.slack.com/archives/C0234CPPXPA/p1660743493480119
- https://grist.slack.com/archives/C0234CPPXPA/p1660333148491559
- https://grist.slack.com/archives/C0234CPPXPA/p1663069291726159
I tested what made many `AddOrUpdateRecord` actions slow in the first place. It was almost entirely due to producing many individual `AddRecord` user actions. About half of that time was for processing the resulting `AddRecord` doc actions. Lookups and updates were not a problem. With these changes, the slowness is gone.
The Python user action implementation is more complex but there are no surprises. The JS API now groups `records` based on the keys of `require` and `fields` so that `BulkAddOrUpdateRecord` can be applied to each group.
Test Plan: Update and extend Python and DocApi tests.
Reviewers: jarek, paulfitz
Reviewed By: jarek, paulfitz
Subscribers: jarek
Differential Revision: https://phab.getgrist.com/D3642
Summary:
When running as a deployment test, there are some timing issues
in the DuplicateDocument test. These tweaks appear to resolve
them.
Test Plan: checked with staging_deployment test target
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3638
Summary:
This endpoint has started to fail when called between a pair
of doc workers. The simplest fix is to simply remove it, it serves no
purpose.
Test Plan: added basic deployment test
Reviewers: dsagal
Reviewed By: dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3636
Summary:
FreeTeam test was overlapping with DuplicateDocument test.
It was leaving some documents in personal workspace.
Test Plan: Updated tests
Reviewers: paulfitz
Reviewed By: paulfitz
Differential Revision: https://phab.getgrist.com/D3632
XLSX export of active view / table
Co-authored-by: Louis Delbosc <louis.delbosc.prestataire@anct.gouv.fr>
Co-authored-by: Vincent Viers <vincent.viers@beta.gouv.fr>
Summary: Adding title and buttons for empty workspace screen.
Test Plan: Updated
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3622
Summary:
The selection was not cleared after removing rows, and it still
kept deleted rows ids. Removing selected rows once again
produced an assertion error.
Also, the selection is now cleared when columns are removed.
Test Plan: Updated tests
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3623
Summary:
upgrade typeorm version, so Grist can run against newer versions of postgres.
Dusted off some old benchmarking code to verify that important queries don't get slower. They don't appear to, unlike for some intermediate versions of typeorm I tried in the past.
Most of the changes are because `findOne` changed how it interprets its arguments, and the value it returns when nothing is found. For the return value, I stuck with limiting its impact by emulating old behavior (returning undefined rather than null) rather than propagating the change out to parts of the code unrelated to the database.
Test Plan: existing tests pass; manual testing with postgres 10 and 14
Reviewers: georgegevoian
Reviewed By: georgegevoian
Differential Revision: https://phab.getgrist.com/D3613
Summary:
Highlighting wasn't working correctly for the new
normalized search for autocomplate widgets.
Test Plan: Existing tests
Reviewers: alexmojaki
Reviewed By: alexmojaki
Differential Revision: https://phab.getgrist.com/D3602
Summary:
Fixes some bugs involving intervals, and updates RandomizedTimer to support both fixed and
randomized delays, and to better handle async callbacks.
* Fixed a bug where Throttle would queue up many pidusage calls due to the use of
setInterval, and the async nature of the calls.
* Fixed a but where RandomizedTimer (now just Interval) would not be disabled in
ActiveDoc on doc shutdown if initialization had not yet settled.
Test Plan: Tested manually.
Reviewers: jarek, dsagal
Reviewed By: jarek, dsagal
Subscribers: dsagal
Differential Revision: https://phab.getgrist.com/D3604
Summary:
Show raw data will now open a popup with
raw section instead of redirecting to raw data page.
Adding new anchor link type "a2" that is able to open
any section in a popup on a current view.
Not related:
Fixing highlightMatches function, after merging core PR.
Test Plan: Updated tests
Reviewers: alexmojaki, georgegevoian
Reviewed By: alexmojaki, georgegevoian
Subscribers: georgegevoian, alexmojaki
Differential Revision: https://phab.getgrist.com/D3592
Summary:
- Moved /test/client and /test/common to core.
- Moved two files (CircularArray and RecentItems) from app/common to core/app/common.
- Moved resetOrg test to gen-server.
- `testrun.sh` is now invoking common and client test from core.
- Added missing packages to core's package.json (and revealed underscore as it is used in the main app).
- Removed Coord.js as it is not used anywhere.
Test Plan: Existing tests
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3590
Summary: This particular test fails often enough to be annoying but not often enough to be worrying. It's not clear why, but it seems like a race condition involving redis. Fixing the test 'properly' seems hard and not worth the effort. Looking at the past 20 Jenkins builds, I found this test failing once. If we assume that the probability of failing is 1/20 (it's probably less since the test actually runs 3 times with different server configurations) then the probability of failing 3 times independently is (1/20)^3 = 1/8000, so `this.retry(3)` seems like a good enough solution. See also: https://grist.slack.com/archives/C0234CPPXPA/p1652909955773049
Test Plan: Manually made the test fail randomly 90% of the time, in which case `this.retries(3)` was not usually enough to prevent failures, but `this.retries(300)` was.
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3595
Summary: Removing duplicated tests that were moved to grist-core.
Test Plan: Existing tests
Reviewers: paulfitz
Reviewed By: paulfitz
Subscribers: paulfitz
Differential Revision: https://phab.getgrist.com/D3588
