gristlabs_grist-core/app/client/components/LayoutEditor.ts

/**
 * The LayoutEditor can be attached to a Layout object to allow changing it.
 *
 * Issues:
 * TODO: Hitting ESC while dragging should revert smoothly. We can collapse the original leaf, but
 * not remove it. On Cancel, we would uncollapse it, and remove the newly-inserted targetBox.
 * TODO: UNDO should work. It's OK to just rebuild the old layout without any transition. In other
 * words, this may be fine to do fully outside of LayoutEditor.
 * TODO: if mouseup over an active hint of the DropTargeter, it might be a better experience to
 * reposition to that spot.
 *
 * TEST CASES THAT SHOULD BE VERIFIED AFTER ANY CHANGE.
 * These refer to test/client/components/sampleLayout.js, testable at
 * http://localhost:8080/testKoForm.html#topTab=4.
 * 1. Drag #1 down and up its container element, pausing at borders. Elements around that border
 * should smoothly float to open space for it. Dropping it should cause no jumps.
 * 2. Drag #1 down to top of #6. A grey "drop target" rectangle should appear. Hovering over it
 * should open space over #6. After that, dragging to bottom of #6 and back to top of #6 should
 * open the space automatically without the "drop target".
 * 3. Drag #3 right and left in its container, pausing at borders. Elements should again smoothly
 * float to open space for it. Dropping it should cause no jumps.
 * 4. Drag #4 down into #5, positioning above #5, below, to the left (splitting #5 horizontally)
 * or to the right.
 * 5. Drop #4 onto the leftmost "drop target" on the left side of #5. It should end up as 1/3 of
 * the width of the entire layout, spanning the full height above #6. Drop it back to its place
 * between #3 and #9.
 * 6. Resizing: every vertical line should allow dragging it left or right to resize. The "resize"
 * mouse pointer should appear over a few pixels to the left and right of the border, it should
 * not be a difficult area to target. (This gets messed up if overflow:hidden is set on the box
 * elements.)
 * 7. Drag box 3 to trash; hovering should make it disappear from Layout, mousing back should
 * bring it back. Mouse-up over the trash icon should leave it out of the layout.
 * 8. Drag boxes 3, 9, 10, 2, 7, 1 (8 should stretch vertically), 5 to trash. They should
 * disappear with other elements shrinking or expanding to close the gap.
 * 9. Adding a new element: Drag "+ Add New" box to between 1 and 2. A "drop target" should
 * appear, allowing you to insert it. Same for adding between 3 and 4. Should be no jumps.
 * 10. Drag new element to above #3: three possible drop targets should appear. Hover over each in
 * turn, starting from the bottommost part, and make sure it gets inserted in the right level.
 */


import {extend, noop, pick} from 'underscore';
import {observable, removeNode, utils} from 'knockout';
import assert from 'assert';
import Promise from 'bluebird';
import {Events as BackboneEvents} from 'backbone';

import {Disposable, emptyNode} from 'app/client/lib/dispose';
import {Delay} from 'app/client/lib/Delay';
import dom from 'app/client/lib/dom';
import koDom from 'app/client/lib/koDom';
import {ContentBox, Layout, LayoutBox} from './Layout';
import * as ko from 'knockout';
import {get as getBrowserGlobals} from 'app/client/lib/browserGlobals';

/**
 * Use the browser globals in a way that allows replacing them with mocks in tests.
 */
const G = getBrowserGlobals('document', 'window', '$');

//----------------------------------------------------------------------

class HelperBox {
  public box!: LayoutBox;
  public scalePerFlexUnit: number = 0;
  public nextSiblings: LayoutBox[] = [];
  public origNextSizes: number[] = [];
  public origSize: number = 0;
  public sumAll: number = 0;
  public sumPrev: number = 0;
  public sumNext: number = 0;
  constructor(data?: Partial<HelperBox>) {
    if (data) {
      extend(this, data);
    }
  }
}

interface TargetPart {
  box: LayoutBox;
  isChild: boolean;
  isAfter: boolean;
}

interface JqueryUI {
  size: { width: number, height: number };
  position: { left: number, top: number };
  originalPosition: { left: number, top: number };
  originalSize: { width: number, height: number };
}

type LeafId = string|number;

/**
 * The Floater class represents a floating version of the element being dragged around. Its size
 * corresponds to the box being dragged. It lets the user see what's being repositioned.
 */
class Floater extends Disposable implements ContentBox {
  public leafId: ko.Observable<LeafId|null>;
  public leafContent: ko.Observable<Element | null>;
  public fillWindow: boolean;
  public dom: HTMLElement;
  public mouseOffsetX: number;
  public mouseOffsetY: number;
  public lastMouseEvent: MouseEvent | null;

  public create(fillWindow?: boolean) {
    this.leafId = observable<LeafId|null>(null);
    this.leafContent = observable<Element | null>(null);
    this.fillWindow = fillWindow || false;

    this.dom = this.autoDispose(dom('div.layout_editor_floater',
      koDom.show(this.leafContent),
      koDom.scope(this.leafContent, (leafContent: Element) => {
        return leafContent;
      })
    ));
    G.document.body.appendChild(this.dom);

    this.mouseOffsetX = 0;
    this.mouseOffsetY = 0;
    this.lastMouseEvent = null;
  }
  public onInitialMouseMove(mouseEvent: MouseEvent, sourceBox: ContentBox) {
    const rect = sourceBox.dom!.getBoundingClientRect();
    this.dom.style.width = rect.width + 'px';
    this.dom.style.height = rect.height + 'px';
    this.mouseOffsetX = 0.2 * rect.width;
    this.mouseOffsetY = 0.1 * rect.height;
    this.onMouseMove(mouseEvent);

    this.leafId(sourceBox.leafId());
    this.leafContent(sourceBox.leafContent());
    // We use a dummy non-null leafId here, to ensure that sourceBox remains considered a leaf.
    sourceBox.leafId('empty');
    sourceBox.leafContent(dom('div.layout_editor_empty_space',
      koDom.style('margin', (rect.height * 0.02) + 'px'),
      koDom.style('min-height', (rect.height * 0.96) + 'px')
    ));
  }
  public onMouseUp() {
    this.lastMouseEvent = null;
  }
  public onMouseMove(mouseEvent: MouseEvent) {
    this.lastMouseEvent = mouseEvent;
    this.dom.style.left = (mouseEvent.clientX - this.mouseOffsetX) + 'px';
    this.dom.style.top = (mouseEvent.clientY - this.mouseOffsetY) + 'px';
  }
}




//----------------------------------------------------------------------

/**
 * DropOverlay is a rectangular indicator that's displayed over a leaf box under the mouse
 * pointer, and shows regions of affinity towards one of the borders. It also computes which
 * region the user is targeting, and returns an affinity value.
 */
class DropOverlay extends Disposable {
  public overlayElem: HTMLElement;
  public overlayRect: DOMRect|null;
  public hBorder: number | null;
  public vBorder: number | null;
  public create() {
    this.overlayElem = this.autoDispose(dom('div.layout_editor_drop_overlay'));
    this.overlayRect = null;
    this.hBorder = null;
    this.vBorder = null;
  }
  /**
   * Hides the overlay box by detaching it from the current element, if any.
   */
  public detach() {
    if (this.overlayElem.parentNode) {
      this.overlayElem.parentNode.removeChild(this.overlayElem);
    }
  }
  /**
   * Shows the overlay box over the given element.
   */
  public attach(targetElem: HTMLElement) {
    const rect = this.overlayRect = targetElem.getBoundingClientRect();
    /*
    // If uncommented, this will show areas of affinity when hovering over a box. This is helpful in
    // debugging, and may be helpful to users too, but makes the interface feel more cluttered.
    if (this.overlayElem.parentNode !== targetElem) {
      // This also automatically removes it from the old parent, if any.
      targetElem.appendChild(this.overlayElem);
    }
    */
    // Areas of affinity are essentially fat borders, proportional to width and height. In addition,
    // to avoid overly disproportionate regions, we use twice the smaller dimension to limit the
    // larger dimension.
    this.hBorder = Math.floor(Math.min(rect.height, rect.width * 2) / 3);
    this.vBorder = Math.floor(Math.min(rect.width, rect.height * 2) / 3);
    const s = this.overlayElem.style;
    s.borderTopWidth = s.borderBottomWidth = this.hBorder + 'px';
    s.borderLeftWidth = s.borderRightWidth = this.vBorder + 'px';
  }
  /**
   * If the mouse is over a region of affinity, returns the affinity as an 0-3 integer (see
   * AFFINITY_NAMES above). Otherwise, returns -1.
   */
  public getAffinity(mouseEvent: MouseEvent) {
    const rect = this.overlayRect!;
    const x = mouseEvent.clientX - rect.left, y = mouseEvent.clientY - rect.top;
    const top = getFrac(y, this.hBorder!), down = getFrac(rect.height - y, this.hBorder!);
    const left = getFrac(x, this.vBorder!), right = getFrac(rect.width - x, this.vBorder!);
    const minValue = Math.min(top, down, left, right);

    return (minValue === Infinity ? -1 : [top, down, left, right].indexOf(minValue));
  }
}

//----------------------------------------------------------------------

/**
 * DropTargeter displays a set of rectangles, each of which represents a particular allowed
 * insertion point for the element being dragged. It only shows the insertion points at the edge
 * of a particular layoutBox as indicated by DropOverlay.
 */
class DropTargeter extends Disposable {
  public listenTo: BackboneEvents["listenTo"];
  public trigger: BackboneEvents["trigger"];
  public stopListening: BackboneEvents["stopListening"];
  public rootElem: HTMLElement;
  public targetsDom: HTMLElement|null;
  public currentBox: LayoutBox | null;
  public currentAffinity: number | null;
  public delayedInsertion: Delay;
  public activeTarget: TargetPart|null;

  public create(rootElem: HTMLElement) {
    this.rootElem = rootElem;
    this.targetsDom = null;
    this.currentBox = null;
    this.currentAffinity = null;
    this.delayedInsertion = Delay.create();
    this.activeTarget = null;
    this.autoDisposeCallback(this.removeTargetHints);
  }
  public removeTargetHints() {
    if (this.activeTarget?.box?.dom) {
      this.activeTarget.box.dom.style.transition = '';
      this.activeTarget.box.dom.style.padding = '0';
    }
    this.activeTarget = null;
    this.delayedInsertion.cancel();
    if (this.targetsDom) {
      removeNode(this.targetsDom);
      this.targetsDom = null;
    }
    this.currentBox = null;
    this.currentAffinity = null;
  }
  public updateTargetHints(
    layoutBox: LayoutBox|null,
    affinity: number,
    overlay: DropOverlay,
    prevTargetBox?: LayoutBox
  ) {
    // Nothing to update.
    if (!layoutBox || (layoutBox === this.currentBox && affinity === this.currentAffinity)) {
      return;
    }
    this.removeTargetHints();
    if (affinity === -1) {
      return;
    }
    this.currentBox = layoutBox;
    this.currentAffinity = affinity;

    const upDown = isAffinityUpDown(affinity);
    const isAfter = isAffinityAfter(affinity);

    const targetParts: TargetPart[] = [];
    // Allow dragging a leaf into another leaf as a child, splitting the latter into two.
    // But don't allow dragging a leaf box into itself, that makes no sense.
    if (upDown === layoutBox.isVBox() && layoutBox !== prevTargetBox) {
      targetParts.push({box: layoutBox, isChild: true, isAfter: isAfter});
    }
    while (layoutBox) {
      if (upDown === layoutBox.isHBox()) {
        const children = layoutBox.childBoxes.peek();
        // If one of two children is prevTargetBox, replace the last target hint since it
        // will be redundant once prevTargetBox is removed.
        if (children.length === 2 && prevTargetBox?.parentBox() === layoutBox) {
          targetParts.splice(targetParts.length - 1, 1,
            {box: layoutBox, isChild: false, isAfter: isAfter});
        }
        // If there is only one child (which may happen for the root box), the target hint
        // is redundant.
        else if (prevTargetBox !== layoutBox && prevTargetBox !== layoutBox.getSiblingBox(isAfter) &&
          children.length !== 1) {
          targetParts.push({box: layoutBox, isChild: false, isAfter: isAfter});
        }
        if (isAfter && !layoutBox.isLastChild()) { break; }
        if (!isAfter && !layoutBox.isFirstChild()) { break; }
      }
      layoutBox = layoutBox.parentBox();
    }
    if (targetParts.length === 0) {
      return;
    }

    // Render the hint parts.
    if (!isAfter) {
      targetParts.reverse();
    }

    // The same code works for both horizontal and vertical situation. For ease of thinking about
    // it, we pretend below that we are dealing with an up-down situation (drop hints are horizontal
    // wide boxes stacked vertically), and use properties that are named using the up-down
    // situation, but whose values might reflect a left-right situation.
    const pTop = upDown ? 'top' : 'left', pHeight = upDown ? 'height' : 'width',
          pLeft = upDown ? 'left' : 'top', pWidth = upDown ? 'width' : 'height';
    let totalHeight = upDown ? overlay.hBorder! : overlay.vBorder!;
    const singleHeight = Math.floor(totalHeight / targetParts.length);

    // Adjust to account for the rounding-down above.
    totalHeight = singleHeight * targetParts.length;

    const outerRect = this.rootElem.getBoundingClientRect();
    const innerRect = this.currentBox.dom!.getBoundingClientRect();

    const self = this;
    this.targetsDom = dom('div.layout_editor_drop_targeter',
      koDom.style(pTop,
        (innerRect[pTop] - outerRect[pTop] +
          (isAfter ? innerRect[pHeight] - totalHeight : 0)) + 'px'
      ),
      targetParts.map((part, index) => {
        const rect = part.box.dom!.getBoundingClientRect();
        return dom('div.layout_editor_drop_target', (elem: HTMLDivElement) => {
            elem.style[pHeight] = (singleHeight + 1) + 'px'; // 1px of overlap for better looks
            elem.style[pWidth] = rect[pWidth] + 'px';
            elem.style[pLeft] = (rect[pLeft] - outerRect[pLeft]) + 'px';
            elem.style[pTop] = (singleHeight * index) + 'px';
          },
          dom.on('mouseenter', function(this: HTMLElement) {
            this.classList.add("layout_hover");
            self.activeTarget = part;
            const padDir = upDown ? (isAfter ? 'Bottom' : 'Top') : (isAfter ? 'Right' : 'Left');
            const padding = 'padding' + padDir;
            part.box.dom!.style.transition = 'padding .3s';
            part.box.dom!.style[padding as any] = '20px';
          }),
          dom.on('mouseleave', function(this: HTMLElement) {
            this.classList.remove("layout_hover");
            self.activeTarget = null;
            part.box.dom!.style.padding = '0';
          }),
          dom.on('transitionend', this.triggerInsertion.bind(this, part))
        );
      })
    );
    this.rootElem.appendChild(this.targetsDom!);
  }
  public triggerInsertion(part: TargetPart) {
    this.removeTargetHints();
    this.trigger('insertBox', (box: LayoutBox) => {
      if (part.isChild) {
        part.box.addChild(box, part.isAfter);
      } else {
        part.box.addSibling(box, part.isAfter);
      }
    });
  }
  public accelerateInsertion() {
    if (this.activeTarget) {
      this.activeTarget.box.dom!.style.transition = '';
      this.activeTarget.box.dom!.style.padding = '0';
      this.triggerInsertion(this.activeTarget);
    }
  }
}

extend(DropTargeter.prototype, BackboneEvents);

//----------------------------------------------------------------------

/**
 * When a LayoutEditor is created for a given Layout object, it makes it possible to drag
 * LayoutBoxes to change the layout.
 *
 * When a user drags a box, its content migrates temporarily to the Floater element, which moves
 * with the mouse cursor. As the user drags, the space for the element will open up here or there,
 * by adding an appropriate empty targetBox. DropOverlay and DropTargeter together decide the
 * insertion point for the drag operations.
 *
 * NOTES:
 *  There is some awkwardness in sizing: in a vertically laid out box, the last box takes up all
 *  available space, so moving it away does not show a transition (the box transitions to empty in
 *  theory, but it still takes all the same available space).
 */
export class LayoutEditor extends Disposable {
  public layout: Layout;
  public rootElem: HTMLElement;
  public floater: Floater;
  public dropOverlay: DropOverlay;
  public dropTargeter: DropTargeter;
  public measuringBox: HTMLElement;

  public listenTo: BackboneEvents["listenTo"];
  public trigger: BackboneEvents["trigger"];
  public stopListening: BackboneEvents["stopListening"];

  public transitionPromise: Promise<void>;
  public trashDelay: Delay;
  public originalBox: LayoutBox|null;
  public targetBox: LayoutBox|null;
  public boundMouseDown: (ev: MouseEvent, el: HTMLElement) => void;
  public boundMouseMove: (ev: MouseEvent, el: HTMLElement) => void;
  public boundMouseUp: (ev: MouseEvent, el: HTMLElement) => void;
  public initialMouseDown: boolean;
  public lastTriggered: string;

  public create(layout: Layout) {
    this.layout = layout;
    this.rootElem = layout.rootElem;

    this.layout.buildLayout(this.layout.getLayoutSpec(), true);
    this.floater = this.autoDispose(Floater.create(this.layout.fillWindow));
    this.dropOverlay = this.autoDispose(DropOverlay.create());
    this.dropTargeter = this.autoDispose(DropTargeter.create(this.rootElem));
    this.listenTo(this.dropTargeter, 'insertBox', this.onInsertBox);

    // This is a place to put LayoutBoxes that should NOT be shown, but SHOULD be possible to
    // measure. It's used when a new box is being moved into the editor.
    this.measuringBox = this.autoDispose(dom('div.layout_editor_measuring_box'));
    this.rootElem.appendChild(this.measuringBox);

    // For better experience, we prevent new repositions while a transition is active, and we
    // require some work (leaving and re-entering affinity area) after a previous transition ends.
    this.transitionPromise = Promise.resolve();
    this.trashDelay = Delay.create();

    // TODO: We don't use originalBox at the moment, but may want to, specifically to collapse it
    // without removing, and restore if the user hits "Escape".
    // This is the box the user clicked, to move its content elsewhere.
    this.originalBox = null;

    // The new box into which the content is to be inserted. During a move operation, it starts out
    // with this.originalBox.
    this.targetBox = null;

    // Make all LayoutBoxes resizable. Update whenever the layout changes.
    this.layout.forEachBox(this.makeResizable, this);
    this.listenTo(this.layout, 'layoutChanged', () => {
      this.layout.forEachBox(this.makeResizable, this);
    });

    const self = this;
    this.boundMouseDown = function(this: HTMLElement, ev: MouseEvent) {
      return self.handleMouseDown(ev, this);
    };
    this.boundMouseMove = this.handleMouseMove.bind(this);
    this.boundMouseUp = this.handleMouseUp.bind(this);
    G.$(this.rootElem).on('mousedown', '.layout_leaf', this.boundMouseDown);

    this.initialMouseDown = false;

    this.lastTriggered = 'stop';

    this.autoDisposeCallback(() => {
      G.$(G.window).off('mouseup', this.boundMouseUp);
      G.$(G.window).off('mousemove', this.boundMouseMove);
      G.$(this.rootElem).off('mousedown', this.boundMouseDown);
      if (!this.layout.isDisposed()) {
        this.layout.buildLayout(this.layout.getLayoutSpec(), false);
        this.layout.forEachBox(this.unmakeResizable, this);
      }
    });
  }
  public triggerUserEditStart() {
    assert(this.lastTriggered === 'stop', "UserEditStart triggered twice in succession");
    this.lastTriggered = 'start';
    // This attribute allows browser tests to tell when an edit is in progress.
    this.rootElem.setAttribute('data-useredit', 'start');
    this.layout.trigger('layoutUserEditStart');
  }
  public triggerUserEditStop() {
    assert(this.lastTriggered === 'start', "UserEditStop triggered twice in succession");
    this.lastTriggered = 'stop';
    this.layout.trigger('layoutUserEditStop');
    // This attribute allows browser tests to tell when an edit is finished.
    this.rootElem.setAttribute('data-useredit', 'stop');
  }
  public makeResizable(box: LayoutBox) {
    // Do not add resizable if:
    // Box already resizable, box is not vertically resizable, box is last in it`s group.
    if (G.$(box.dom).resizable('instance') || (box.isHBox() && !this.layout.fillWindow) ||
      box.isLastChild()) {
      return;
    }
    const helperObj = new HelperBox({box});
    const isWidth = box.isVBox();
    G.$(box.dom).resizable({
      handles: isWidth ? 'e' : 's',
      start: this.onResizeStart.bind(this, helperObj, isWidth),
      resize: this.onResizeMove.bind(this, helperObj, isWidth),
      stop: this.triggerUserEditStop.bind(this),
    });
  }
  public unmakeResizable(box: LayoutBox) {
    if (G.$(box.dom).resizable("instance")) {
      // Resizable widget is set for this box.
      G.$(box.dom).resizable('destroy');
    }
  }
  public onResizeStart(helperObj: HelperBox, isWidth: boolean, event: MouseEvent, ui: JqueryUI) {
    this.triggerUserEditStart();
    const size = isWidth ? ui.originalSize.width : ui.originalSize.height;
    helperObj.scalePerFlexUnit = size / (helperObj.box.flexSize() || 1);
    const allSiblings = helperObj.box.parentBox()!.childBoxes.peek();
    const index = allSiblings.indexOf(helperObj.box);
    helperObj.nextSiblings = allSiblings.slice(index + 1);
    helperObj.origNextSizes = helperObj.nextSiblings.map(function(b) { return b.flexSize(); });
    helperObj.origSize = helperObj.box.flexSize();
    helperObj.sumPrev = allSiblings.slice(0, index).reduce(adder, 0);
    helperObj.sumAll = allSiblings.reduce(adder, 0);
    helperObj.sumNext = helperObj.sumAll - helperObj.sumPrev;
  }
  public onResizeMove(helperObj: HelperBox, isWidth: boolean, event: MouseEvent, ui: JqueryUI) {
    const sizePx = isWidth ? ui.size.width : ui.size.height;
    let newSize = sizePx / helperObj.scalePerFlexUnit;

    // We need some amount of snapping to make it easier to align boxes. The way we'll do it is to
    // adjust flexSize of the box being resized and all following boxes so that boundaries end up at
    // multiples of fullSize / NumSteps.
    newSize = snap(newSize, helperObj.sumPrev, helperObj.sumAll);
    const siblingsFactor = (helperObj.sumNext - newSize) / (helperObj.sumNext - helperObj.origSize);
    let sumPrev = helperObj.sumPrev + newSize;
    const newSizes: number[] = [];
    helperObj.origNextSizes.forEach(function(size) {
      const s = snap(size * siblingsFactor, sumPrev, helperObj.sumAll);
      sumPrev += s;
      newSizes.push(s);
    });

    if (newSize <= 0 || newSizes.some(size => size <= 0)) {
      return; // This isn't an acceptable position.
    }
    if (newSize !== helperObj.box.flexSize.peek()) {
      helperObj.box.flexSize(newSize);
      helperObj.nextSiblings.forEach(function(b, i) {
        b.flexSize(newSizes[i]);
      });
      this.layout.trigger('layoutResized');
    }
  }
  public handleMouseDown(event: MouseEvent, elem: HTMLElement) {
    const target = (event.target as HTMLElement);
    if (event.button !== 0 || target?.classList.contains('ui-resizable-handle')) {
      return;
    }
    if (target?.classList.contains('layout_grabbable')) {
      this.initialMouseDown = true;
      this.originalBox = utils.domData.get(elem, 'layoutBox');
      assert(this.originalBox, "MouseDown on element without an associated layoutBox");
      G.$(G.window).on('mousemove', this.boundMouseMove);
      G.$(G.window).on('mouseup', this.boundMouseUp);
      return false;
    }
  }
  // Exposed for tests
  public dragInNewBox(event: MouseEvent, leafId: number) {
    const box = this.layout.buildLayoutBox({leaf: leafId});

    // Place this box into a measuring div.
    this.measuringBox.appendChild(box.getDom());

    this.handleMouseDown(event, box.dom!);
  }
  public startDragBox(event: MouseEvent, box: LayoutBox) {
    this.triggerUserEditStart();
    this.targetBox = box;
    this.floater.onInitialMouseMove(event, box);
    this.trigger('dragStart', this.originalBox);
  }
  public handleMouseUp(event: MouseEvent) {
    G.$(G.window).off('mousemove', this.boundMouseMove);
    G.$(G.window).off('mouseup', this.boundMouseUp);

    if (this.initialMouseDown) {
      this.initialMouseDown = false;
      return;
    }

    // We stopped dragging, any listener can clean its modification
    // to the floater element.
    this.trigger('dragStop');
    this.targetBox!.takeLeafFrom(this.floater);
    // We dropped back the box to its original position, now
    // anyone can hijack the box.
    this.trigger('dragDrop', this.targetBox);

    // Check if the box was hijacked by a drop target.
    if (this.originalBox?.leafId() !== 'empty') {
      if (this.dropTargeter.activeTarget) {
        this.dropTargeter.accelerateInsertion();
      } else {
        resizeLayoutBox(this.targetBox!, 'reset');
      }
    }

    this.dropTargeter.removeTargetHints();
    this.dropOverlay.detach();
    this.trigger('dragEnd');
    // Cleanup for any state.
    this.transitionPromise.finally(() => {
      this.floater.onMouseUp();
      resizeLayoutBox(this.targetBox!, 'reset');
      this.targetBox = this.originalBox = null;
      emptyNode(this.measuringBox);
      this.triggerUserEditStop();
    });
  }

  public getBoxFromElement(elem: HTMLElement) {
    const box = this.layout.getContainingBox(elem);
    if (box && !box.isDomDetached()) {
      return box;
    }
    return null;
  }

  public getBox(leafId: number) {
    return this.layout.getLeafBox(leafId);
  }

  public removeContainingBox(box: LayoutBox) {
    if (box && !box.isDomDetached()) {
      this.triggerUserEditStart();
      this.targetBox = box;
      this.doRemoveBox(box);
      this.triggerUserEditStop();
    }
  }

  public doRemoveBox(box: ContentBox) {
    const rect = box.dom!.getBoundingClientRect();
    box.leafId('empty');
    box.leafContent(dom('div.layout_editor_empty_space',
      koDom.style('min-height', rect.height + 'px')
    ));
    this.onInsertBox(noop).catch(noop);
  }
  public handleMouseMove(event: MouseEvent) {
    // Make sure the grabbed box still exists
    if (!this.originalBox || this.originalBox?.isDisposed()) {
      return;
    }

    if (this.initialMouseDown) {
      this.initialMouseDown = false;
      this.startDragBox(event, this.originalBox);
    }
    this.floater.onMouseMove(event);

    this.trigger('dragMove', event, this.originalBox);

    if (this.transitionPromise.isPending()) {
      // Don't attempt to do any repositioning while another reposition is happening.
      return;
    }

    // Handle dragging to trash.
    if (dom.findAncestor(event.target, null, '.layout_trash')) {
      const isTrashed = this.targetBox && this.targetBox.isDomDetached();
      if (!this.trashDelay.isPending() && !isTrashed) {
        // To "trash" a box, we call onInsertBox with noop for the inserter function. The new box
        // will still be created, just not attached to anything.
        this.trashDelay.schedule(100, this.onInsertBox, this, noop);
      }
      return;
    }
    this.trashDelay.cancel();
    this.updateTargets(event);
  }

  public updateTargets(event: MouseEvent) {
    if (this.transitionPromise.isPending()) {
      // Don't attempt to do any repositioning while another reposition is happening.
      return;
    }
    // See if we are over a layout_leaf, and that the leaf is in the same layout as the dragged
    // element. If so, we are dealing with repositioning.
    const elem = dom.findAncestor(event.target, this.rootElem, '.' + this.layout.leafId);
    if (elem) {
      const hoverBox = utils.domData.get(elem, 'layoutBox');
      this.dropOverlay.attach(elem);
      const affinity = this.dropOverlay.getAffinity(event);
      this.dropTargeter.updateTargetHints(hoverBox, affinity, this.dropOverlay, this.targetBox!);
    } else if (!dom.findAncestor(event.target, this.rootElem, '.layout_editor_drop_target')) {
      this.dropTargeter.removeTargetHints();
    }
  }
  public async onInsertBox(inserterFunc: (box: LayoutBox) => void) {
    // Create a new LayoutBox, and insert it using inserterFunc.
    // Shrink prevTargetBox to 0. Create a new target box, initially shrunk, and grow it.
    const prevTargetBox = this.targetBox!;

    this.targetBox = LayoutBox.create(this.layout);
    this.targetBox.takeLeafFrom(prevTargetBox);
    this.targetBox.flexSize(prevTargetBox.flexSize());

    // Sizing boxes vertically requires extra care that the sum of values doesn't change.
    this.targetBox.getDom(); // Make sure its dom is created.


    //console.log("onInsertBox %s -> %s", prevTargetBox, this.targetBox);
    let transitionPromiseResolve!: () => void;
    this.transitionPromise = new Promise(function(resolve, reject) {
      transitionPromiseResolve = resolve;
    });

    inserterFunc(this.targetBox);

    const prevRect = prevTargetBox.dom!.getBoundingClientRect();

    // Set previous box size to 0 for accurate measurement of new target box
    const prevFlexGrow = prevTargetBox.dom!.style.flexGrow;
    prevTargetBox.dom!.style.flexGrow = '0';

    const targetRect = this.targetBox.dom!.getBoundingClientRect();

    prevTargetBox.dom!.style.flexGrow = prevFlexGrow;

    await Promise.all([
      resizeLayoutBoxSmoothly(prevTargetBox, prevRect, 'collapse'),
      resizeLayoutBoxSmoothly(this.targetBox, 'collapse', targetRect),
    ]);
    prevTargetBox.dispose();
    if (this.targetBox) {
      resizeLayoutBox(this.targetBox, 'reset');
      this.dropOverlay.attach(this.targetBox.dom!);
    }
    transitionPromiseResolve();
    this.layout.trigger('layoutResized');
  }
}

extend(LayoutEditor.prototype, BackboneEvents);


//----------------------------------------------------------------------

/**
 * When the user hovers near the edge of a box, we call the direction the "affinity", and it
 * indicates where an insertion is to happen. Affinities are represented by numbers 0 - 3. The
 * functions below distinguish top-down vs left-right, and top/left vs down/right.
 */
//const AFFINITY_NAMES = { 0: 'TOP', 1: 'DOWN', 2: 'LEFT', 3: 'RIGHT' };
function isAffinityUpDown(affinity: number): boolean {
  return (affinity >> 1) === 0;
}

function isAffinityAfter(affinity: number): boolean {
  return (affinity & 1) === 1;
}

function getFrac(distance: number, max: number): number {
  return distance < max ? distance / max : Infinity;
}

// We'll snap to 1/NumSteps of total size. The choice of 60 allows many evenly-sized layouts.
const NumSteps = 60;

function round(value: number, multipleOf: number) {
  return Math.round(value / multipleOf) * multipleOf;
}

function snap(flexSize: number, sumPrev: number, sumAll: number) {
  const endEdge = round(sumPrev + flexSize, sumAll / NumSteps);
  return Math.min(endEdge, sumAll) - sumPrev;
}


/**
 * Resizes the given LayoutBox to transition it when it's supposed to expand or collapse. It only
 * affects the height for HBoxes, and only the width for VBoxes. For rows, we use an explicit
 * height. For columns we rely on 'flex-grow' property.
 *    A rectangle object: set the relevant style according to the values there.
 *    'reset': unset the relevant style, to revert to the values associated with CSS classes.
 *    'collapse': collapse to empty size.
 *    'current': set and explicit value for the relevant style, which is needed for transitions.
 */
function resizeLayoutBox(layoutBox: LayoutBox, sizeRect: string|DOMRect) {
  const reset = (sizeRect === 'reset');
  const collapse = (sizeRect === 'collapse');
  if (sizeRect === 'current') {
    sizeRect = layoutBox.dom!.getBoundingClientRect();
  }
  if (layoutBox.isHBox()) {
    layoutBox.dom!.style.height = (reset ? '' : (collapse ? '0px' : (sizeRect as DOMRect).height + 'px'));
  } else {
    layoutBox.dom!.style.width = (reset ? '' : (collapse ? '0px' : (sizeRect as DOMRect).width + 'px'));
  }
  layoutBox.dom!.style.opacity = collapse ? '0.0' : '1.0';
}

function rectDesc(rect: string|DOMRect) {
  return (typeof rect === 'string') ? rect :
    Math.floor(rect.width) + "x" + Math.floor(rect.height);
}

/**
 * Resizes the given LayoutBox smoothly from starting to ending position, where startRect and
 * endRect are one of the values documented in 'resizeLayoutBox'.
 */
function resizeLayoutBoxSmoothly(layoutBox: LayoutBox, startRect: string|DOMRect, endRect: string|DOMRect) {
  if (layoutBox.isDomDetached()) {
    return Promise.resolve();
  }
  const prevFlexGrow = layoutBox.dom!.style.flexGrow;
  layoutBox.dom!.style.flexGrow = '0';
  resizeLayoutBox(layoutBox, startRect);

  // Force the layout engine to compute the current state of the layoutBox.dom element before
  // applying the transition. This follows the recommendation here, and seems to work:
  // https://timtaubert.de/blog/2012/09/css-transitions-for-dynamically-created-dom-elements/
  pick(G.window.getComputedStyle(layoutBox.dom), 'height', 'width');

  // Start the transition.
  layoutBox.dom!.classList.add('layout_editor_resize_transition');
  return new Promise(function(resolve, reject) {
    dom.once(layoutBox.dom, 'transitionend', function() { resolve(); });
    resizeLayoutBox(layoutBox, endRect);
  })
  .timeout(600)    // Transitions are only 400ms long, so complain if nothing happened for longer.
  .catch(Promise.TimeoutError, function() {
    console.error("LayoutEditor.resizeLayoutBoxSmoothly %s %s->%s: transition didn't run",
      layoutBox, rectDesc(startRect), rectDesc(endRect));
    // We keep going. It should look like something's wrong and jumpy, but it should still be
    // usable and not cause errors elsewhere.
  })
  .finally(function() {
    layoutBox.dom!.classList.remove('layout_editor_resize_transition');
    layoutBox.dom!.style.flexGrow = prevFlexGrow;
  });
}


function adder(sum: number, box: LayoutBox) {
  return sum + box.flexSize.peek();
}