gristlabs_grist-core/app/client/ui/OnBoardingPopups.ts

435 lines
12 KiB
TypeScript
Raw Permalink Normal View History

/**
* Utility to generate a series of onboarding popups. It is used to give users a short description
* of some elements of the UI. The first step is to create the list of messages following the
* `IOnBoardingMsg` interface. Then you have to attach each message to its corresponding element of
* the UI using the `attachOnBoardingMsg' dom method:
*
* Usage:
*
* // create the list of message
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
* const messages = [{id: 'add-new-btn', placement: 'right', buildDom: () => ... },
* {id: 'share-btn', buildDom: () => ... ];
*
*
* // attach each message to the corresponding element
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
* dom('div', 'Add New', ..., dom.cls('tour-add-new-btn'));
*
* // start
* startOnBoarding(message, onFinishCB);
*
* Note:
* - this module does UI only, saving which user has already seen the popups has to be handled by
* the caller. Pass an `onFinishCB` to handle when a user dimiss the popups.
*/
import { Disposable, dom, DomElementArg, Holder, makeTestId, styled, svg } from "grainjs";
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
import { createPopper, Placement } from '@popperjs/core';
import { FocusLayer } from 'app/client/lib/FocusLayer';
import * as Mousetrap from 'app/client/lib/Mousetrap';
import { bigBasicButton, bigPrimaryButton } from "app/client/ui2018/buttons";
import { theme, vars } from "app/client/ui2018/cssVars";
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
import range = require("lodash/range");
import {IGristUrlState} from "app/common/gristUrls";
import {urlState} from "app/client/models/gristUrlState";
import {delay} from "app/common/delay";
import {reportError} from "app/client/models/errors";
import {cssBigIcon, cssCloseButton} from "./ExampleCard";
const testId = makeTestId('test-onboarding-');
// Describes an onboarding popup. Each popup is uniquely identified by its id.
export interface IOnBoardingMsg {
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
// A CSS selector pointing to the reference element
selector: string,
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
// Title
title: DomElementArg,
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
// Body
body?: DomElementArg,
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
// If true show the message as a modal centered on the screen.
showHasModal?: boolean,
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
// The popper placement.
placement?: Placement,
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
// Adjusts the popup offset so that it is positioned relative to the content of the reference
// element. This is useful when the reference element has padding and no border (ie: such as
// icons). In which case, and when set to true, it will fill the gap between popups and the UI
// part it's pointing at. If `cropPadding` is falsy otherwise, the popup might look a bit distant.
cropPadding?: boolean,
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
// The popper offset.
offset?: [number, number],
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
// Skip the message
skip?: boolean;
// If present, will be passed to urlState().pushUrl() to navigate to the location defined by that state
urlState?: IGristUrlState;
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
}
// There should only be one tour at a time. Use a holder to dispose the previous tour when
// starting a new one.
const tourSingleton = Holder.create<OnBoardingPopupsCtl>(null);
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
export function startOnBoarding(messages: IOnBoardingMsg[], onFinishCB: () => void) {
const ctl = OnBoardingPopupsCtl.create(tourSingleton, messages, onFinishCB);
ctl.start().catch(reportError);
}
// Returns whether some tour is currently active.
export function isTourActive(): boolean {
return !tourSingleton.isEmpty();
}
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
class OnBoardingError extends Error {
public name = 'OnBoardingError';
constructor(message: string) {
super(message);
}
}
/**
* Current index in the list of messages.
* This allows closing the tour and reopening where you left off.
* Since it's a single global value, mixing unrelated tours
* (e.g. the generic welcome tour and a specific document tour)
* in a single page load won't work well.
*/
let ctlIndex = 0;
class OnBoardingPopupsCtl extends Disposable {
private _openPopupCtl: {close: () => void}|undefined;
private _overlay: HTMLElement;
private _arrowEl = buildArrow();
constructor(private _messages: IOnBoardingMsg[], private _onFinishCB: () => void) {
super();
if (this._messages.length === 0) {
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
throw new OnBoardingError('messages should not be an empty list');
}
// In case we're reopening after deleting some rows of GristDocTour,
// ensure ctlIndex is still within bounds
ctlIndex = Math.min(ctlIndex, this._messages.length - 1);
this.onDispose(() => {
this._openPopupCtl?.close();
});
}
public async start() {
this._showOverlay();
await this._move(0);
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
Mousetrap.setPaused(true);
this.onDispose(() => {
Mousetrap.setPaused(false);
});
}
private _finish() {
this._onFinishCB();
this.dispose();
}
private async _move(movement: number, maybeClose = false) {
const newIndex = ctlIndex + movement;
const entry = this._messages[newIndex];
if (!entry) {
if (maybeClose) {
// User finished the tour, close and restart from the beginning if they reopen
ctlIndex = 0;
this._finish();
}
return; // gone out of bounds, probably by keyboard shortcut
}
ctlIndex = newIndex;
if (entry.skip) {
// movement = 0 when starting a tour, make sure we don't get stuck in a loop
await this._move(movement || +1);
return;
}
// close opened popup if any
this._openPopupCtl?.close();
if (entry.urlState) {
await urlState().pushUrl(entry.urlState);
await delay(100); // make sure cursor is in correct place
}
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
if (entry.showHasModal) {
this._showHasModal();
} else {
await this._showHasPopup(movement);
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
}
}
private async _showHasPopup(movement: number) {
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
const content = this._buildPopupContent();
const entry = this._messages[ctlIndex];
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
const elem = document.querySelector<HTMLElement>(entry.selector);
const {placement} = entry;
// The element the popup refers to is not present. To the user we show nothing and simply skip
// it to the next.
if (!elem) {
console.warn(`On boarding tour: element ${entry.selector} not found!`);
// movement = 0 when starting a tour, make sure we don't get stuck in a loop
return this._move(movement || +1);
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
}
// Cleanup
function close() {
popper.destroy();
dom.domDispose(content);
content.remove();
}
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
this._openPopupCtl = {close};
document.body.appendChild(content);
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
this._addFocusLayer(content);
// Create a popper for positioning the popup content relative to the reference element
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
const adjacentPadding = entry.cropPadding ? this._getAdjacentPadding(elem, placement) : 0;
const popper = createPopper(elem, content, {
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
placement,
modifiers: [{
name: 'arrow',
options: {
element: this._arrowEl,
},
}, {
name: 'offset',
options: {
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
offset: [0, 12 - adjacentPadding],
}
}],
});
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
}
private _addFocusLayer(container: HTMLElement) {
dom.autoDisposeElem(container, new FocusLayer({
defaultFocusElem: container,
allowFocus: (elem) => (elem !== document.body)
}));
}
// Get the padding length for the side that will be next to the popup.
private _getAdjacentPadding(elem: HTMLElement, placement?: Placement) {
if (placement) {
let padding = '';
if (placement.includes('bottom')) {
padding = getComputedStyle(elem).paddingBottom;
}
else if (placement.includes('top')) {
padding = getComputedStyle(elem).paddingTop;
}
else if (placement.includes('left')) {
padding = getComputedStyle(elem).paddingLeft;
}
else if (placement.includes('right')) {
padding = getComputedStyle(elem).paddingRight;
}
// Note: getComputedStyle return value in pixel, hence no need to handle other unit. See here
// for reference:
// https://developer.mozilla.org/en-US/docs/Web/API/Window/getComputedStyle#notes.
if (padding && padding.endsWith('px')) {
return Number(padding.slice(0, padding.length - 2));
}
}
return 0;
}
private _showHasModal() {
const content = this._buildPopupContent();
dom.update(this._overlay, content);
this._addFocusLayer(content);
function close() {
content.remove();
dom.domDispose(content);
}
this._openPopupCtl = {close};
}
private _buildPopupContent() {
return Container(
{tabindex: '-1'},
this._arrowEl,
ContentWrapper(
cssCloseButton(cssBigIcon('CrossBig'),
dom.on('click', () => this._finish()),
testId('close'),
),
cssTitle(this._messages[ctlIndex].title),
cssBody(this._messages[ctlIndex].body),
this._buildFooter(),
testId('popup'),
),
dom.onKeyDown({
Escape: () => this._finish(),
ArrowLeft: () => this._move(-1),
ArrowRight: () => this._move(+1),
Enter: () => this._move(+1, true),
}),
);
}
private _buildFooter() {
const nSteps = this._messages.length;
const isLastStep = ctlIndex === nSteps - 1;
const isFirstStep = ctlIndex === 0;
return Footer(
ProgressBar(
range(nSteps).map((i) => Dot(Dot.cls('-done', i > ctlIndex))),
),
Buttons(
bigBasicButton(
'Previous', testId('previous'),
dom.on('click', () => this._move(-1)),
dom.prop('disabled', isFirstStep),
{style: `margin-right: 8px; visibility: ${isFirstStep ? 'hidden' : 'visible'}`},
),
bigPrimaryButton(
isLastStep ? 'Finish' : 'Next', testId('next'),
dom.on('click', () => this._move(+1, true)),
),
)
);
}
private _showOverlay() {
document.body.appendChild(this._overlay = Overlay());
this.onDispose(() => {
document.body.removeChild(this._overlay);
dom.domDispose(this._overlay);
});
}
}
function buildArrow() {
return ArrowContainer(
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
svg('svg', { style: 'width: 13px; height: 34px;' },
svg('path', {'d': 'M 2 19 h 13 v 18 Z'}))
);
}
const Container = styled('div', `
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
align-self: center;
border: 2px solid ${theme.accentBorder};
border-radius: 3px;
z-index: 1000;
max-width: 490px;
position: relative;
background-color: ${theme.popupBg};
box-shadow: 0 2px 18px 0 ${theme.popupInnerShadow}, 0 0 1px 0 ${theme.popupOuterShadow};
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
outline: unset;
`);
function sideSelectorChunk(side: 'top'|'bottom'|'left'|'right') {
return `.${Container.className}[data-popper-placement^=${side}]`;
}
const ArrowContainer = styled('div', `
position: absolute;
& path {
stroke: ${theme.accentBorder};
stroke-width: 2px;
fill: ${theme.popupBg};
}
${sideSelectorChunk('top')} > & {
bottom: -26px;
}
${sideSelectorChunk('bottom')} > & {
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
top: -23px;
}
${sideSelectorChunk('right')} > & {
left: -12px;
}
${sideSelectorChunk('left')} > & {
right: -12px;
}
${sideSelectorChunk('top')} svg {
transform: rotate(-90deg);
}
${sideSelectorChunk('bottom')} svg {
transform: rotate(90deg);
}
${sideSelectorChunk('left')} svg {
transform: scalex(-1);
}
`);
const ContentWrapper = styled('div', `
position: relative;
padding: 32px;
background-color: ${theme.popupBg};
`);
const Footer = styled('div', `
display: flex;
flex-direction: row;
margin-top: 32px;
justify-content: space-between;
`);
const ProgressBar = styled('div', `
display: flex;
flex-direction: row;
`);
const Buttons = styled('div', `
display: flex;
flex-directions: row;
`);
const Dot = styled('div', `
width: 6px;
height: 6px;
border-radius: 3px;
margin-right: 12px;
align-self: center;
background-color: ${theme.progressBarFg};
&-done {
background-color: ${theme.progressBarBg};
}
`);
const Overlay = styled('div', `
position: fixed;
display: flex;
flex-direction: column;
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
justify-content: center;
width: 100%;
height: 100%;
top: 0;
left: 0;
z-index: 999;
overflow-y: auto;
`);
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
const cssTitle = styled('div', `
font-size: ${vars.xxxlargeFontSize};
font-weight: ${vars.headerControlTextWeight};
color: ${theme.text};
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
margin: 0 0 16px 0;
line-height: 32px;
`);
const cssBody = styled('div', `
color: ${theme.text};
(core) Brings welcome tour and hide behind a flag Summary: This diff brings in the new welcome tour. It builds upon `client/ui/OnBoardingPopup` that was committed to that purposes. Per this diff, the tour is accessible behind a flag and won't be visible to user: few caveats listed below needs to be adressed first. This diff also brings few changes to onboarding module. - allow to refer to element with selector - usually dynamic selection of element sounds useful for when the element does not exist yet when the tour starts. But the actual reason when add it here, is to allow selecting the first cell. - if the selector yields undefined (missing element), the popup is simply skipped - got rid of the internal registry to link between popup contents and popup options. All is now define in the same interface. Registry overall felt overkill and not needed. - adds an option to show message as a simple modal that is centered on the screen This diff also brings the new welcome tour and hide it behind a flag CAVEATS that need to be addressed in follow up commit: - The url needs cleanup, #repeat-welcome-tour sticks to it and so even when navigating to home page. This could eventually become an issue: if user opens another document it would starts the onboarding tour again. - For now you have to manually make sure the right panel is opened with the Column tab selected before starting the tour. - On boarding tours were not designed with mobile support in mind. So probably a good idea to disable. - Backend support needs to be done (persistence of first time user). Test Plan: Updated `projects/OnBoardingPopup` and adds new `nbrowser/welcomeTour` To launch the tour: - open any document - open manually the right panel and the field tab - append the flag `#repeat-welcome-tour` at the end of the url in the url bar and reload the page Reviewers: dsagal Reviewed By: dsagal Differential Revision: https://phab.getgrist.com/D2917
2021-07-19 08:49:44 +00:00
`);