cfenollosa_os-tutorial/19-interrupts-irqs

Concepts you may want to Google beforehand: IRQs, PIC, polling

Goal: Finish the interrupts implementation and CPU timer

Remap the PIC

When the CPU boots, the PIC maps IRQs 0-7 to INT 0x8-0xF and IRQs 8-15 to INT 0x70-0x77. This conflicts with the ISRs we programmed last lesson. Since we programmed ISRs 0-31, it is standard to remap the IRQs to ISRs 32-47.

The PICs are communicated with via I/O ports (see lesson 15). The Master PIC has command 0x20 and data 0x21, while the slave has command 0xA0 and data 0xA1.

The code for remapping the PICs is obfuscated, so check this article if you're curious. Otherwise, just look at cpu/isr.c, new code after we set the IDT gates for the ISRs. After that, we add the IDT gates for IRQs.

Now we jump to assembler, at interrupt.asm. The first task is to add global definitions for the IRQ symbols we just used in the C code. Look at the end of the global statements.

Then, add the IRQ handlers. Same interrupt.asm, at the bottom. Notice how they jump to a new common stub: irq_common_stub (next step)

We then create this irq_common_stub which is very similar to the ISR one. It is located at the top of interrupt.asm, and it also defines a new [extern irq_handler]

Now back to C code.

• Write the irq_handler in C: